Used Universal Turning Machine for sale (93,058)

Year of construction: 1991, condition: ready for operation (used), Control Unit Brand FANUC Model 15T Chedexp Smrspfx Aacjd This Monforts RNC 3 horizontal turning machine was manufactured in 1991. It features a three-jaw power chuck, hydraulic hollow clamping device, manual tailstock, and a Fanuc control system. Additional highlights include a chip conveyor with a discharge height of 1200 mm and a manual swing-in measuring probe for tool measurement. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 3 machine we have for sale. Contact us for further details regarding this machine. Application Types Turning

Condition: ready for operation (used), A conventional universal milling machine H. Ernault Somua is available. Table dimensions X/Y: 1600mm/370mm, travel X/Y/Z: 1000mm/320mm/440mm, spindle taper: ISO50, speed: 2000rpm, power: 7.3kW. Machine dimensions X/Y/Z: approx. 2700mm/1700mm/1600mm, weight: approx. 2500kg. The NC display and coolant system are defective. The machine shows an offset of 0.4mm on the X-axis. An on-site inspection is possible. Cjdsxt Rmfspfx Aacohd

Condition: used, Year of construction: 2007, functionality: fully functional, total width: 1,200 mm, total height: 3,100 mm, overall weight: 850 kg, type of input current: AC, input voltage: 230 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, Well-maintained Zwick Roell universal testing machine mounted on a base with safety door, including load cell, extensometer, controller, and additional tooling for clamping flat tensile specimens. Supplied without specimen holders and threaded inserts. Test space dimensions: 640 x 1935 mm. Software: testXpert II with master test protocol for tensile tests, declaration of conformity, and CE marking. After powering off and on, an error occurs indicating the extensometer cannot be addressed; this can be resolved by unplugging and reconnecting the interface cable. Otherwise, the machine functions perfectly and remains DAkkS calibrated until January 2026. Cedpfx Aajxrdbtjcehd

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm Chedpfx Aasqvd Iujcjd max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: good (used), Year of construction: 2009, Working hours (dated April 2025): - Machine on: 34.320 h - Control on: 23.218 h - Auto. cycle: 11.987 h * CNC control HEIDENHAIN iTNC 530 * Electronic handwheel * Automatic universal milling head (overhauled in 2018), 2.5 / 2.5 deg. indexing * Coolant device with paper band filter * Cooling through the spindle * Chip conveyor * NC rotary table YRT F 1000/1250 (4th axis): - Diameter 1250 mm - Max. load 3500 kg - Overall height 265 mm - Table top thickness 125 mm - Partial accuracy +/- 2.5" x-travel 2500 mm y-travel 1600 mm z-travel 1200 mm Table dimensions 2860 x 1200 mm Csdpfxow Icccs Aacehd tool taper ISO 50 spindle turning speed range 20 - 3000 rpm max. torque on the spindle 700 Nm feed range 2 - 10000 mm/min rapid traverse 25 m/min spindle motor 32 kW weight of the machine approx. 25,0 t

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen Cedpfoxbpuksx Aacjhd • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Year of construction: 2018, condition: ready for operation (used), Main Drive Spindle speed range 60–6000 Spindle motor power 11/15 kW Tool taper A2-5 Media Oil water separator Yes Chip conveyor Yes Additional Equipment Turret with Direct Mount (12 stations) High-Precision Linear Guides on All Axes Coolant System Hydraulic System Full Enclosure Automatic Lubrication System Csdpfx Aexpyqleacohd Signal Lamp (3-color) Work Area Lighting Automatic Machine Shutdown (via M-Code) Automatic Chuck Operation This Goodway GLS-150 was manufactured in 2018. A robust horizontal turning machine featuring a FANUC 01-T control system with a 10.4" LCD and Manual Guide functionality. It boasts a spindle speed of 60-6000 RPM and a maximum bar capacity of 51 mm. Equipped with a high-precision linear guide on all axes, a 12-station turret, and a reinforced coolant pump for enhanced performance. If you are looking to get high-quality turning capabilities consider the Goodway GLS-150 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 1996, Machine: Console Milling Machine - Universal Brand: MAHO Type: MH1000 Technical Specifications: Cedpfx Asxn Rkgoacjhd - Spindle motor: 5.5 kW - 1500 RPM - Feed motor: 3 kW - 1500 RPM - Pump motor: 0.18 kW - 3000 RPM - 70 l/min - Spindle speeds: (18) 32-1600 RPM - Spindle nose: ISA40 - Drill spindle travel; 125mm - Table dimensions against the column: 570x600mm - X travel: 1000mm - Slide travel: 750mm - Z travel: 600mm - X feeds: 10-5000mm/min - Rapid feed: 1.4m/min - Universal table dimensions: 1250x740mm - 360-degree rotating table - Table tilts longitudinally and transversely by approximately 30 degrees - Machine weight: 5500 kg

Condition: good (used), Year of construction: 1986, CNC universal milling machine Make DECKEL Type: FP5NC Bj.1986 control DIALOG 4 Traverse paths: X710mm Y600mm Z500mm Clamping table : 1000mm x 550mm Tool clamp: SK40 Feed speed programmable: 2 ... 3600 mm / min Speed: 18 ... 6300 rpm Spindle power: 7.5KW Chjdpfx Aaoxr A A Ajced machine in stock.

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. Codpjqvd Iqjfx Aacehd - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: good (used), Year of construction: 2004, Universalfräsmaschine mit Streckensteuerung HEIDENHAIN TNC 124 mech. Handräder drehbarer Kipptisch +- 45°, hydr. Werkzeugspannung, Halbkabine Kühlmittelbehälter Handbuch Technische Details: x-Weg 600 mm y-Weg 400 mm z-Weg 400 mm Spindeldrehanzahl 63 - 3.150 1/min Vorschub stufenlos 12-3000 / 6-1500 (Z) mm/min Chjdpfxeigm Tcs Aacod Pinolenhub 100 mm Kopf schwenkbar +/- 90° Spindelaufnahme ISO SK 40 Aufspannfläche 630 x 400 mm Gesamtleistungsbedarf 8 kW Maschinengewicht ca. 2,2 t Raumbedarf ca. 2 x 1,9 x 1,95

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Especially designed for staircase construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drilling are easily achievable thanks to the swivelling drilling unit. Csdpoxmatnofx Aacjhd - Motor with pole changing, two speeds - Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor start via convenient handle switch - Equipped with Röhm two-jaw chuck 1–20 mm - Linear laser for precise workpiece positioning - Drilling unit can swivel 65° left and right - Pneumatic adjustment of machining height; dowelling possible on two levels without resetting - Desired drilling heights can be set for each level via a digital counter; switching is then pneumatic from the front - Cross movement 340 mm, stepless or in 12 mm increments with indexing rail - Pneumatic clamping possible at any position, controllable from the front - Maximum height adjustment approx. 100 mm above table height - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, 1 clamp column repositionable to the front - 2 swivelling workpiece supports - Suction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Set of drill bits - Operating manual - CE mark - Machine was partially repainted due to existing paint splashes - Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "other offers from this provider."

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 1130 Measurements depth 1890 Measurements height 1800 Machine weight 1600 Control Unit Brand SIEMENS Model SINUMERIK 810D Main Drive Spindle speed range 6500 Spindle motor power 7.5 kW Number of axis 2 Cedpfx Aexpyxieacshd Movement X-Axis Movement 300 mm Y-Axis Movement 250 mm Tools Slots in storage 8 Additional Equipment Tool Holders Included: 35 This Benzinger TNC-L was manufactured in 1998. A robust horizontal turning machine featuring a max bar capacity of 26mm, main spindle drive power of 7.5kW, and a speed range up to 6500/min. It includes 35 tool holders and a coolant tank capacity of 120l. Ideal for precision turning with a swing diameter over the longitudinal slide of 380mm. If you are looking to get high-quality turning capabilities consider the Benzinger TNC-L machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details Cedpfjxl Tcgex Aacehd x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm table load max. 200 kg tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a research centre. Equipment: 3-axis active digital readout made by Heidenhain TNC 113 Fixed angle table Coolant equipment Kelch mounting block Machine vise Counterholding device for the horizontal spindle

Condition: excellent (used), Used TOS metal milling machine, model FNK 25. The machine is in good technical condition and ready for operation. It is equipped with numerous functions that enable precise machining of various materials. This milling machine is a solid choice for workshops or hobbyists seeking a reliable tool for metalworking. Loading of the machine on site is provided. Cjdpfx Aasxfwkzocohd Table: 1250 x 250 mm - Working travels: - X axis: 800 mm - Y axis: 350 mm - Z axis: 420 mm - Spindle taper: ISO - 40 - Spindle speed range: 56 – 4,500 rpm - Maximum workpiece weight: 200 kg - Motor power: 3.5 kW - Dimensions (L x W x H): 2650 x 1980 x 2260 mm - Machine weight: 1,760 kg

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel: X: 300 mm Y: 150 mm Z: 340 mm Chedpfx Aaeghtvascod Table size: 600 x 200 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.6 kW, pole-changing Power supply: 380 Volt, 50 Hz - Feeds on X and Z axes - Spindle speed adjustable by 2 motor speeds and 8 gear steps - Quill travel on vertical milling head: 60 mm - Swivel, rotatable, and tiltable angle table - Coolant pump integrated in machine base - Free-standing control cabinet Space requirements (L x W x H): 1100 x 1100 x 1600 mm Weight: 650 kg In good condition

Year of construction: 2011, condition: ready for operation (used), X-axis: 1150mm, y-axis: 710mm, z-axis: 710mm, number of tool positions: 32, rapid traverse/feed rate: 30m/min, working area height: 2578mm, tool holder: SK40, accuracy: 10μm, speed: 18,000/min, drive power 40% ED: 28kW, control: Heidenhain iTNC 530, power connection: 80A, connected load: 48kVA, length: 4228mm (including rear wall and chip conveyor), width: 3458mm, total height: 3256mm, chip conveyor height: 965mm, weight: 10.5t, operating hours: 30,521h, spindle hours: 15,386h. With Zeroclamp 12 pots 138 (zero-point clamping system). An on-site inspection is possible. Codpfx Aajxtpqvecjhd

Year of construction: 2005, condition: ready for operation (used), Main Drive Number of axis 2 Movement X-Axis Movement 260 Z-Axis Movement 610 Media Chip conveyor Yes Additional Equipment Bar Feeder: Equipped with Emco bar loader Chip Conveyor: Included Part Catcher: Integrated turret has 12 positions (all are driven) maximum bar diameters that can be processed are Ø65mm due to the drawtube VDI 30 This EMCO Turn E65 was manufactured in 2005. A horizontal turning machine equipped with an Emco bar loader, chip conveyor, and an integrated part catcher. It features a single turret with driven tools, enhancing its functionality. If you are looking to get high-quality turning capabilities, consider the EMCO Turn E65 machine we have for sale. Contact us for more information. Chjdpfx Asxpyvzsacjd Application Types Turning

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) Cjdpjw Hxuaofx Aacshd 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Year of construction: 2003, condition: ready for operation (used), Main Drive Spindle speed range 3000 rpm Csdpfx Ajxpyq Ejacjhd This BOEHRINGER DUS400Ti was manufactured in 2003. A robust horizontal turning machine featuring a manual plus 4410 control, it boasts a turning diameter of 420mm and a distance between centers of 1200mm. Equipped with a Schunk Rota-S Ø250 chuck and a main spindle speed of 3000 rpm. Consider the opportunity to buy this BOEHRINGER DUS400Ti horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 1997, condition: ready for operation (used), Control Unit Brand OKUMA Model OSP7000L Main Drive Number of axis 4 Codpfxoxl H Hlj Aacohd This 4-axis Okuma LU2-M was manufactured in 1997. It features a turning length of 1500 mm, ideal for horizontal turning machine applications. Consider the opportunity to buy this Okuma LU2-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2021, operating hours: 280 h, condition: ready for operation (used), Control Unit Brand FANUC Main Drive Spindle speed range 5000 rpm Spindle motor power 11/22 kW Tool taper A2-6 Number of axis 4 Movement X-Axis Movement 165/195 mm Y-Axis Movement +- 50 mm Z-Axis Movement 700/720 mm Turret Number of turrets 2 Tools Number of index 2x12 Media Chip conveyor Yes Chsdpfxoxpkn Us Aacsd Internal cooling Yes Additional Equipment USB interface Three-colour signal light 1 set of soft jaws CHIP CONVEYOR HS with lateral ejection Transformer incl. cable Manual compressed air gun Bar feeder interface // Bar loader interface Parts catcher main spindle Parts unloader: Parts unloading system for the counter spindle incl. parts conveyor belt Workpiece ejector / Workpiece drm: 230 mm / Workpiece X: 673 mm This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2021. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2022, Main Drive Number of spindles 1 Spindle speed range 4000 rpm Spindle motor power 35 kW Number of axis 9 Additional Equipment Machine language: German / Machine manuals available for download in pdf format / G codes type A in Fanuc control / LPS for left spindle Reduction tube for left spindle / 3 jaw power chuck SMW-Autoblock BB-D 210 Ø66 for left spindle with one set of soft jaws / Collet chuck Hainbuch AXFIX 65 (mini) 10794/0003 for left spindle Changing device Hainbuch diam. 65 / LPS system in right spindle / Tailstock on the right spindle (long version) for moving tailstock center CM 3 (not included in the option) / clamping pressure for right spindle; selectable via M function 3 jaw power chuck SMW-Autoblok BBD 175 Ø56 for right spindle with one set of soft jaws / Collet chuck Hainbuch AXFIX 65 (mini) 10794/0003 for right-hand spindle / Tool presetter (tool presetter) / Lateral chip conveyor (standard version) Coolant system consisting of two coolant pumps up to 70 bar, one for each turret, independently adjustable to 70-60-50-40-30-10 bar, mounted on an additional tank of 330 liters, as well as a filter system of 10µm. Coolant washing nozzle / Machine status light / Tool life monitoring (tool life management) / Tool load monitoring Programmable, automatic parts catcher (pneumatic) / The workpiece remover is equipped with a collecting tray that opens and closes pneumatically to remove the workpiece. Coolant supply through right-hand spindle Optional: Cucchi Giovanni Typ DB EVO70 loader This 3-axis CMZ TTL-66-66-T1Y-T2Y lathe was manufactured in 2022. It features a maximum rod diameter of 66mm, turning diameter up to 220mm, and main spindle power of 35Kw. The machine includes a 70 bar high-pressure system with a filter system and an additional tank. A second identical machine is also available from 2022. For more information about this lathe, please reach out to us. Application Types Turning Chsdsxpkmqjpfx Aacod

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1730 Measurements depth 2110 Measurements height 1820 Machine weight 4500 Main Drive Spindle speed range 45 - 4500 Spindle motor power 11 kW Movement X-Axis Movement 235 mm Z-Axis Movement 520 mm Chedsxpkl Tepfx Aacod Workpiece Workpiece drm 390 mm Additional Equipment Hinged belt chip conveyor Some accessories would also be included (see photos) This MORI SEIKI SL-204 MC was manufactured in 2001. A lathe equipped with an MSG-805 control system, featuring X-axis travel of 235 mm and Z-axis travel of 520 mm. It includes a spindle speed range of 45 - 4500 rpm and a spindle motor power of 11 kW. Ideal for precise and efficient turning operations. Contact us for further details regarding this lathe. Application Types Turning

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 1985 mm Measurements depth 1734 mm Measurements height 2250 mm Machine weight 4050 kg Control Unit Brand OKUMA Model OSP P300L Chedpexulcwsfx Aacjd Main Drive Spindle speed range 50 - 6000 rpm Movement X-Axis Movement 260 Y-Axis Movement 100 Z-Axis Movement 350 Additional Equipment Includes Barfeed Magazine: IRCO MUK-7012 (6-70mm/1250mm) Includes Tool Holders (including driven) and Collet Chuck Hainbuch SPANNTOP This 3-axis Okuma LB2000EXII MC horizontal turning machine was manufactured in 2013. It features a chuck size of 6 inches, a maximum swing diameter of 580 mm, and a maximum machining diameter of 360 mm. The spindle speed ranges from 50 to 6000 rpm, and it includes a turret head with 12 tool positions. Additionally, it comes with an IRCO MUK-7012 barfeed magazine and Hainbuch SPANNTOP collet chuck. Consider the opportunity to buy this Okuma LB2000EXII MC horizontal turning machine. Contact us for more information. Application Types Turning