Used Ups Power Supplay for sale (54,366)

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-170 B Ijdpfeuv Eudex Adija Electronic DC load, USB / Analogue / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNenn Overcurrent protection range 0...1.1 * INenn Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Temperature coefficient of the setting values Δ / K current / voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C) ≤ 0.1% UNenn Display: Accuracy ≤ 0.1% UNenn Remote sensing compensation Max. 5% UNenn Current control Setting range 0...173.4 A Stability at ΔU < 0.1% UNenn Accuracy (at 23 ± 5°C) ≤ 0.2% INenn Display: Accuracy ≤0.1% INenn Rise time 10...90% INenn < 23 μs Fall time 90...10% INenn < 46 μs Power control Setting range 0...2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance control Setting range 0.04...15.3 Ω Accuracy (at 23 ± 5°C) ≤1% of the final resistance value + 0.3% of INenn Display: Accuracy Included in the accuracy of the control value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, remote control on/off, R mode on/off Message signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation from the device Max. 400 V DC Sampling rate setpoint inputs 500 Hz Isolation: Input (DC) to housing DC minus: permanent max. ±400 V DC plus: permanent max. ±400 V + max. input voltage Input (AC) to input (DC) Max. 2500 V, short-term Climate: Cooling type Temperature-controlled fans Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x master-slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, Ether- CAT Galvanic isolation from the device Max. 400 V DC Connections: Rear Share bus, DC input, AC input, Sense, analog interface, USB-B, Master- slave bus, interface module slot Front USB-A Dimensions: Housing (WxHxD) 19" x 2 U x 464 mm Total (WxHxD) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Pneumatic power clamp Make DESTACO type 82L 3G-251C8HO used from machine dismantling length 200 mm width 35 mm Isdeq Evraspfx Adioa height 75 mm 2 x available

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size can be agreed) Rear discharge conveyor with magnet roll (magnetic head pulley) Iodsw Rz Rqopfx Adioa Twin drive (separate drives for scraper floor and infeed roller) Hydr. self propelled drive (for moving on site) Radio remote control

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived in 2025) MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Technical specifications: Edge thickness for rolls: 0.4 - 3 mm (depending on material) Edge thickness for strips: 0.4 - 8 mm (depending on material) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Restrictions may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: Motorized pressure bridge adjustment Extendable workpiece support XL, 600 mm spacing 3-color LED light in the infeed Motorized adjustment of the infeed guide Long infeed guide 1252 mm I-Tronic package Ijdpfxexymd Te Adiea Edge Control PPC 322 W IntelliSet: intelligent Tool correction f.a.s.t = fast setting technology ECO mode Energy saving mode Prepared for RETURN connection (third-party manufacturer) BS 501 guide system; right-angled workpiece feeding for front edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm FG201 jointing unit with 2 64 mm high milling heads MG 301 edge feeder GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° pivoting for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reactant (water molecules) from the PUR, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently of the machine's power supply and automatically compensates for any vacuum loss. - PUR fully under control! DW 301 printing unit with motorized NC axis; 1st roller driven by pneumatic plunge control, 2 conical pressure rollers GM301 spray unit after printing unit with lubricant for high-gloss edges KA 501 pneumatic trimming unit (60 mm) Extraction hoods for trimming unit FR301 MOT6 multifunctional trimming unit Shelf program FF 301 MOT1 profile trimming unit ZK301 MOT4 scraper unit including high-gloss package FK702 surface scraper Complete spray unit for separating and cleaning agent GM 301 spray unit after printing unit (high-gloss edges) SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: Short-term Storage location: Hochheim

Condition: good (used), Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: LinMot, Switching Power Supply 72V/1000W -Type: S01-72/1000 Iedpfjxvrwdox Adija -Mains voltage range: Ue. AC 3 x 340-550V / 50/60Hz. -Dimensions: 270/65/H195 mm -Weight: 2.1 kg

Condition: used, Pneumatic punching unit TÜNKERS, pneumatic power cylinder Pneumatic punching bracket, punching frame, punching unit, punching frame Year of manufacture: 2019 Model No.: 141-1040F Punching frame No.: B-13-26/100 Pressing force: 4 tons (40 kN at 8 bar) Air connection: max. 8 bar Throat depth: 100 mm Frame width: 60 mm Hole diameter: Ø 2-13 mm Hole diameter (installed punch): Ø 4 mm Die diameter (outer): Ø 22 mm - Stripper made of Vulkollan polyurethane elastomer Iedpfx Aoxf Uqxedisa Dimensions L x W x H: 280 x 110 x 480 mm Weight: 36 kg Very good condition

Condition: used, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer Service Performed General Information: For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance carried out regularly by the manufacturer. Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance included - Ideal for research, testing, and development applications Technical Data – Test Bench Feature / Value - Overall height of test bench: 1215 mm (without clamping device) - Width of test bench: 2005 mm - Depth of test bench: 1205 mm - Maximum force amplitude: 10 kN - Maximum total force: ±20 kN - Measurement transducer accuracy: min. Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Ijdpjxrffasfx Adisa Feature / Value - Overall height of control cabinet: approx. 1800 mm - Table top height: 1080 mm - Width of control cabinet: 650 mm (narrow table top) / 1450 mm (wide table top) - Depth of control cabinet: 700 mm (narrow table top) / 800 mm (wide table top) - Weight: 152 kg (small table top) 187 kg (large table top); with granite plate: 247 kg Site Requirements Feature / Value - Required space: 4.3 × 3.0 m - Required ceiling height: 2.5 m - Floor load capacity: 234 N/cm² Power Requirements Feature / Value - Voltage: 400 V three-phase AC with neutral and protective earth - Phase rotation: clockwise sequence - Voltage fluctuation: ≤ ±10 % - Short voltage dips: < 20 ms - Limits for continuous interference: interference class A according to VDE 0871 - Frequency: 50 Hz ± 1 % - Protective earth / ground resistance: < 0.3 Ω Connection and Fusing Feature / Value - Power supply: 400 V / 50 Hz (clockwise phase sequence) - Connector: CEE plug, 5-pin, 16 A - Fuse rating: 16 A Test bench weight: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical specifications!) Further questions can be answered by phone.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 16,584 h, load capacity: 6,590 kg, lifting height: 4,010 mm, fuel type: gas, mast type: simplex, construction height: 2,910 mm, fork carriage width: 2,000 mm, fork length: 1,800 mm, empty load weight: 12,270 kg, total length: 3,550 mm, drive type: Treibgas, construction width: 2,000 mm, LPG forklift Load centre of gravity: 600 Fork width: 150 mm Fork thickness: 70 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tires type: super elastic Front tires size: 8.25-15 Rear tires type: super elastic Rear tires size: 8.25-15 Description: In addition to this Jungheinrich model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this Power+ 987 P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork adjustment device, Iedpfx Adswgp Nhoiea Heating, full cabin, Rotating driver's seat

Year of construction: 2017, condition: used, engine 12 Zylinder cubic capacity 57200 ccm total power requirement 3.438 kW Electric capacity 1.516 kw thermal performance 1.425 kW Number of working hours ca. 34.683 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. The combined heat and power unit is sold professionally dismantled and free on truck. Ijdpfx Ajxwzhbodiea Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as subject to prior sale.

Condition: used, mileage: 250,062 km, power: 100 kW (135.96 HP), fuel type: gas, gearing type: mechanical, first registration: 07/2017, next inspection (TÜV): 11/2027, emission class: euro6, color: white, number of seats: 9, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), * €7,600 net * Fiat Ducato 3.0 Natural Power Petrol/CNG, 9 seats, air conditioning, parking sensors, Euro 6 * 9 seats (3+3+3) * 6-speed manual transmission * On-board computer * Radio CD * Front airbags * Armrest * Bluetooth * Tire pressure monitoring system * Central locking * Electric mirrors * Electric windows * On-board computer * Traction control * Steel wheels * Daytime running lights * USB port * Isofix child seat anchor * Air conditioning * ABS * ESP (Electronic Stability Program) * Rear parking sensors (PDC) * Right sliding door * Wheelbase 345 cm * Unladen weight: 2,420 kg * Permissible total weight: 3,500 kg * Passenger car registration * Vehicle No. 33 OPENING HOURS Monday - Friday from 09:00 - 17:00 (By appointment only...) CONTACT DETAILS Phone: WhatsApp: Iodpfxjxw Rw Sj Adioa E-mail: Export and temporary license plates available. Subject to errors and prior sale. Technical details and equipment features must be checked separately. The contractual condition is only that which is viewed and confirmed in writing at the time of purchase. Please make an appointment...

Condition: good (used), Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Teslaman, DC High Voltage Power Supply TD2202 Series Ijdpfsxvpm Asx Adioa -Type: TD2202P100-2000 -Voltage: 220 V -Power: 0 - 100 kV -Dimensions: 520/480/H140 mm -Weight: 22.4 kg

Condition: used, maximum load weight: 29,520 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2020, next inspection (TÜV): 01/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2020, Equipment: ABS, SCHMITZ CARGOBULL SCB S3T ----VEHICLE HISTORY GERMAN VEHICLE TARP UNMARKED VIDEO AVAILABLE UPON REQUEST ----VEHICLE EQUIPMENT WEIGHT / REGISTRATION PERMITTED GROSS WEIGHT: 36,000 KG ----EXTERIOR DIMENSIONS LENGTH: 13.9 M WIDTH: 2.55 M ----INTERIOR DIMENSIONS LENGTH: 13.62 M HEIGHT: 2.78 M WIDTH: 2.48 M ----AXLES / CHASSIS LIFT AXLE: 1ST AXLE NUMBER OF AXLES: 3 SCHMITZ AXLES FULL AIR SUSPENSION ----BRAKES / SAFETY POWER CURTAIN WABCO BRAKES DISC BRAKES EBS (ELECTRONIC BRAKING SYSTEM) ABS (ANTI-LOCK BRAKING SYSTEM) ALB (AUTOMATIC LOAD-DEPENDENT BRAKE FORCE REGULATOR) ----OTHER EQUIPMENT FULLY GALVANIZED FRAME SCHMITZ SAFE ROOF XL CERTIFICATE ----TIRES TIRE TREAD DEPTH: 80% TIRE SIZE: 385/65 R22.5 ----IMMEDIATELY AVAILABLE * EXPORT SALES ONLY WITH MINIMUM DEPOSIT OF €500 - €2,000 EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) Ijdpoxz I Rqefx Adisa 5 DAY, 15 DAY, 30 DAY PLATES AND 15 DAY AUSTRIAN PLATES EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. (For sales to the EU and third countries a deposit/guarantee of at least €500.00 / €1,000.00 applies) Subject to changes, errors, and prior sale! More vehicles can be found on our website. Sales are made exclusively according to our terms and conditions – see website. Important Notice – Important Information: Despite carefully checking all the details in our offer, errors may occur. Some of these may be caused by transmission errors between different platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information for initiating a contract. The details provided here are without guarantee and do not constitute guaranteed properties.

Condition: good (used), RMS RMS vibration exciter with power amplifier and cooling fan Vibration exciter SW 1511/2 Power amplifier TGD 3000-000 00 IN: 3X400V-50Hz 14.5 KVA Cooling fan SWG 108 Condition: used Iodsdhxlgepfx Adisa Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2017, Kitakawa orginal 5 inch 3 jaw Large hole power chuck A2-8 direct spindle connection condition new, never use. in stock include 3 soft jaws for spindle A2-8 new price 11.000 Isdom E Imzspfx Adiea

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS CHP unit price includes dismantling and loading onto your trucks. Year: 2010 Power: 1064 KW Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Iodpfx Adjwd Nw Tjisa Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.

Condition: used, mileage: 214,233 km, power: 100 kW (135.96 HP), fuel type: gas, gearing type: mechanical, first registration: 06/2017, next inspection (TÜV): 11/2027, emission class: euro6, color: white, number of seats: 9, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), * €7,400 net * Fiat Ducato 3.0 Natural Power Petrol/CNG, 9 seats, Air conditioning, Rear parking sensors, Euro 6 * 9 seats (3+3+3) * 6-speed manual gearbox * On-board computer * Radio CD Isdpfoxw Dl Njx Adisa * Front airbags * Armrest * Bluetooth * Tire pressure monitoring system * Central locking * Electric mirrors * Electric windows * On-board computer * Traction control * Steel wheels * Daytime running lights * USB * Isofix * Air conditioning * ABS * ESP * Rear parking assist (PDC) * Sliding door, right side * Wheelbase: 345 cm * Curb weight: 2,420 kg * Permissible total weight: 3,500 kg * Car registration * Vehicle no. 7 OPENING HOURS Monday - Friday from 9:00 a.m. to 5:00 p.m. (By appointment only...) CONTACT DETAILS Phone: WhatsApp: E-mail: Export and customs license plates (export numbers) available upon request. Subject to prior sale and errors. All technical data and equipment features must be verified separately. The agreed condition is solely that which is inspected and confirmed in writing at the time of purchase on site. Please arrange an appointment...

Condition: good (used), Power supply, power converter, power supply unit, switching power supply, DIN rail power supply Manufacturer: Phoenix Contact, power supply -Type: TRIO-PS-2G/1AC/24DC/20 .: 2903151 -Input: AC 100-240V / DC 110-250V Ijdpfx Adext E Svjisa -Output: 24 V -Dimensions: 165/70/H130 mm -Weight: 1.3 kg

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, table length: 4,000 mm, table width: 2,000 mm, positioning accuracy: 0.05 mm, workpiece weight (max.): 1,800 kg, overall weight: 8,000 kg, total length: 10,880 mm, total width: 3,380 mm, total height: 2,280 mm, warranty duration: 12 months, space requirement height: 3,000 mm, space requirement length: 11,500 mm, space requirement width: 4,500 mm, DNE D-Power – The High-Performance Laser Cutting Machine for Your Production The D-Power laser cutting machine with exchange table is the ideal solution for beginners. With a generous table size of 1500 x 3000 mm and extended options ranging from 2000 x 4000 mm to 2500 x 6000 mm, 2500 x 8000 mm, and 2500 x 12000 mm, and laser power of 3,000, 4,000, and 12,000 watts, this machine covers a wide variety of applications. Iedpowzv A Defx Adioa The value for money of the D-Power laser cutting machine will surprise you. You receive high-quality technology and performance at an attractive price, making it an excellent choice for companies and craftsmen who want to enter the world of laser cutting. Take advantage of the latest technologies and increase the efficiency of your production processes with this powerful and versatile machine.

Condition: good (used), TDK-Lambda Type: GEN10-240 TDK-Lambda GEN10-240 | Power supply unit, DC, 1 channel, 2 U, 10V/240A, 2,400W, RS232, RS485 in a 19 inch housing Technical data: Manufacturer TDK-LAMBDA Power supply unit type Programmable laboratory power supply unit Used display type LED x2 Number of channels 1 Output voltage 0...10V DC Output current 0...240A Max. Power 2,4kW Rack mounting 19" Output voltage solution 1.2mV Output current solution 28.8mA Ripple and noise of the voltage (regulated) ≤8Vrms, ≤60Vpp Input connection type terminal block Manufacturer series GEN Operating temperature 0...50°C Dimensions (width x height x depth) 423x43.6x432.8mm Display parameters 4 digits Software LabVIEW Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Iedpjuv E Ausfx Adioa

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: -, laser power: 12,000 W, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 40 mm, sheet thickness copper (max.): 40 mm, table length: 4,000 mm, table width: 2,000 mm, working length: 4,000 mm, working width: 2,000 mm, travel distance X-axis: 2,050 mm, travel distance Y-axis: 4,050 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,800 kg, power: 6,000 kW (8,157.72 HP), type of input current: three-phase, type of cooling: water, overall weight: 9,500 kg, total length: 10,880 mm, total width: 3,380 mm, total height: 2,280 mm, warranty duration: 12 months, space requirement height: 3,000 mm, space requirement length: 11,500 mm, space requirement width: 4,500 mm, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, DNE D-Power – The High-Performance Laser Cutting Machine for Your Production The D-Power laser cutting machine with exchange table is the ideal solution for beginners. With a generous table size of 1500 x 3000 mm and extended options ranging from 2000 x 4000 mm to 2500 x 6000 mm, 2500 x 8000 mm, and 2500 x 12000 mm, and laser power of 3,000, 4,000, and 12,000 watts, this machine covers a wide variety of applications. The value for money of the D-Power laser cutting machine will surprise you. You receive high-quality technology and performance at an attractive price, making it an excellent choice for companies and craftsmen who want to enter the world of laser cutting. Take advantage of the latest technologies and increase the efficiency of your production processes with this powerful and versatile machine. Ijdpfxowzv E So Adioa

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-200 EA Elektro-Automatic Electronic Load (2,4KW) 0-80V 0-200A Technical data: Mains input: Mains voltage 115V/20V switchable Mains frequency 50/60Hz Mains fuse T2.5A DC input: Input voltage U rated 0...80V Input power P rated 0...2400W, with temperature-dependent derating Continuous power 1500W at 20°C environment Input current I rated 0...200A Overvoltage protection limit 1.1 * U rated Maximum permissible input voltage 100V Voltage regulation: Isdjuv Ewropfx Adioa Setting range 0...80V Resolution display 100mV accuracy

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, The D-Power laser cutting machine with shuttle table is the ideal solution for beginners. With a generous table size of 1500 x 3000 mm and extended options from 2000 x 4000 mm to 2500 x 6000 mm, 2500 x 8000 mm, and 2500 x 12000 mm, and a laser power of 3,000, 4,000, and 12,000 watts, this machine covers a wide range of applications. A particularly noteworthy feature is the pivoting laser head, which can be ordered separately if required to enable bevel cuts. This functionality significantly expands the machine's application possibilities, creating scope for creative solutions in metalworking and beyond. Ijdewnbmnopfx Adiea The price-performance ratio of the D-Power laser cutting machine will surprise you. You get high-quality technology and performance at an attractive price, making it an excellent choice for companies and craft businesses looking to enter the world of laser cutting. Take advantage of cutting-edge technologies and increase the efficiency of your production processes with this powerful and versatile machine.

Condition: excellent (used), Knürr-Heinzinger Type: PHN 1200-4 Power supply Power supply unit Power Supply 1200 Volt 4 Ampere Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Ioderhiq Iopfx Adiea We will be happy to answer any further questions you may have on the phone.

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The resonance test bench POWER SWINGLY BigTable is designed as a two-mass oscillator. It consists of an oscillating head excited by a frequency-controlled asynchronous motor using an unbalance motor, which is arranged in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned helical compression springs on the upper crossbeam and is guided centrally. Iedpsvx Su Sjfx Adisa The medium-load drive is arranged in the lower part of the machine and applies the static preload with the help of a gear motor via a spindle drive. The sample space is located above the clamping table and is limited at the top by the adjustable crossbeam. The test bench is controlled by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical data: General data test bench: Total height of test bench 1840 to 2240 mm Height of machine table 1030 mm Width of test bench 800 mm Depth of test bench 1500 mm Height of sample chamber max. 600 mm (without force transducer) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum vibration path ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of test bench approx. 1880 kg Max. weight of clamping device 150 kg General data Control cabinet: Total height of control cabinet 1900 mm Height of table top 1080 mm Width of control cabinet 650 mm Depth of control cabinet 700 mm Weight of control cabinet 152 kg Color RAI 9006 (white aluminum), table top midnight Conditions for the installation location: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load capacity 170 N/cm² Power supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, 2-pole, 16 A Fuse 16 A Connection and ambient conditions Mains conditions: Voltage 400 V rotating current with ΜΡ conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-term dips < 20 ms Limits for continuous interference Radio interference level A according to VDE0871 Frequency 50 Ηz ± 1% Protective earth Earthing resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), EA Elektro Automatik Model: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19" Rack – Laboratory Power Supply 0-80V / 0-170A, 5000W For sale is a high-quality programmable laboratory DC power supply from the renowned manufacturer EA Elektro-Automatik GmbH & Co. KG. This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Key features: - Autoranging (flexible combination of V/A up to maximum power) - Remote sense (up to 2.5 V compensation) - Low ripple: < 10 mV RMS / < 100 mV pp - Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus - Analog control (0–5 V / 0–10 V) - Fan-cooled, robust industrial design Technical data: - Output voltage: 0 … 80 V DC - Output current: 0 … 170 A - Maximum power: 5 kW - Construction: 19" rackmount, 3U - Efficiency: approx. 93% - Weight: approx. 20 kg Iodpfx Ajw S T Rlsdija Scope of delivery (see photo): - EA-PS 8080-170 3U power supply - Power cable (Specifications and technical details subject to change and errors!) For further questions, feel free to contact us by phone.