Used Uv Drier for sale (1,285)

Condition: used, for installation on an existing bar conveyor. Includes: casing with 2 tubes, exhaust fan and control cabinet. Without conveyor Csdpsumvqcsfx Aa Negp

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm - Width: approx. 2,100 mm Cjdpfx Aajvupdco Nsgp - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5%

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. Cgedeu S N R Eepfx Aa Nop - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: used, Year of construction: 2007, UV Dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 Cgodjxn Nlvjpfx Aa Nop - Working width: 1,300 mm (1,445 mm) - Working height: 900 +/- 40 mm - Operator side: right - Max. part height: 70 mm - Number of top lamps: 2 pcs. - Lamps, vertically aligned: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power, max.: 120 W/cm - Conveyor type: rod transport - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm - Voltage, Hz: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max.: +/- 5% Images are for reference only and show a similar machine.*

Year of construction: 2008, condition: used, machine/vehicle number: A0807010-0400, Technical data: - Manufacturer: Venjakob Cgsdeyh Hu Tspfx Aa Nop - Type: H (UV) - Working width: 1,300 mm - Length: 2,500 mm - Total width: 1,510 mm - Feed speed adjustable via frequency converter - Frequency converter not included in delivery - Conveyor belt suitable for ambient temperature up to approx. 120°C - Height: 900 ± 50 mm - Motor power: 0.75 kW - Motor ATEX-compliant - Belt control: pneumatic - Max. load: 70 kg/m - Colour: RAL 7035 light grey - Voltage fluctuations: +/-5% - Location: in stock

Condition: used, Year of construction: 2008, - Producer Printworld - Type PUVD 1600-2 - Year of construction 2008 Codpfx Aasumvkcj Njgp - Working width 1.600 mm - Working height 1.030-1.050 mm - Max. part height 25 mm - Operationside left - Number of lamp from top 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 120 W/cm - Selective shiftable 60 / 90 / 120 W/cm - Conveyor with netbelt - Feed speed adjustable 2 - 50 m/min - Installation length 3.300 mm - Machine measure 3,3 x 2,5 x 1,8 m - Location - Voltage / HZ 400 / 50

Condition: used, Year of construction: 2016, machine/vehicle number: 9960-10-1059, techncal data: - Producer: Printworld - Type. 3D - PUVD 1300 - Working width: max. 1.300 mm - UV-lamp length: 2 x 1.600 mm arc length - Curing systems: 2 pcs of curing systems from top + 1 pcs curing system from down under - UV- power regulation: UV- lamps are able to be individually controlled (30% -100%) - Reflector: Printworld Multifocal –Reflector - Conveyor transport width: 1.400 mm - Total lengths: 4,5 m - Conveyor speed: 3 – 20 m/min - Substrate passage height: 60 mm, max. (option higher) - Execution conveyor belt: PTFE Fiberglass mesh conveyor belt, anti-static coated - Conveyor speed regulation: Infinitely variable with digital control and monitoring - Conveyor adjustment: Conveyor belt guiding system - Conveyor belt drive: Stepper motor with variable speed conveyor belt and digital - control and monitoring - UV radiation protection: Built in on the machine frame - Energy Saving: Automatic standby circuit with power reduction about 10% - Operation / control: Schneider Modicon M258 Logic Controller processor with Magelis colour touch screen - Inlet height: 850 – 900 mm or by appointment) - Outlet height: 850 – 900 mm (or by appointment) - Electrical connection: 400V~, 50 Hz, 3- Phases +N +PE Cgodpfxju Abn To Aa Njp - Current 135A - Location: on stock

Year of construction: 2023, condition: used, functionality: fully functional, This listing is for a Rational UltraVent hood suitable for combi steamers of the types iCombi Pro XS 6 2/3 GN electric. The advanced condensation technology of the Rational UltraVent condensation hood ensures that all steam emitted from the combi steamer is completely captured and discharged. Installation is simple and can also be carried out retroactively at any time. The hood has been inspected by our in-house workshop and is fully functional. You will receive an invoice with VAT shown separately. Our used equipment service for you: - 6-month warranty on electrical components, limited to replacement of defective parts (excluding labor costs) Cgodoylknhjpfx Aa Nsp - High-quality branded equipment at fair prices - Professional refurbishment / inspection & expert cleaning - Tested & fully functional – or your money back - Shipping or collection available as required - Competent advice before and after purchase - Provision of operating manuals, wiring diagrams & spare parts - DGUV V3 safety inspection This UltraVent hood features patented condensation technology, binding and removing steam and vapors. Costly ventilation installations are a thing of the past; no external exhaust connection needed. Installation is straightforward and possible at any time, even retroactively. Ideal for use in small kitchens, retail areas in butcheries, bakeries, snack bars, and catering services. Technical data: Dimensions (W x D x H): approx. 657 x 580 x 240 mm Power connection: Voltage: 230 V / Frequency: 50-60 Hz Serial number: ET3UA23045064733 Year of manufacture: 2023 Condition: Used, inspected, fully functional Additional features: - Integrated lighting - Contactless door switch - Automatic boost of extraction power when the cooking chamber door is opened Shipping: Delivery or collection by arrangement Worldwide shipping on request Shipping to islands or mountain locations only by prior arrangement Subject to changes and errors If you have questions, require advice, or wish to inspect the item on site, please contact us by phone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is subject exclusively to our General Terms and Conditions (GTC).

Condition: refurbished (used), Year of construction: 2023, operating hours: 27 h, functionality: fully functional, working width: 550 mm, area performance: 2,000 m²/h, overall weight: 210 kg, water tank capacity: 40 l, battery voltage: 24 V, The Kärcher B40 W Dose R55 is from 2023 and has only 27 operating hours. It has been completely overhauled by us, with every component cleaned and function-tested. The Kärcher B40 W features a stepless traction drive, greatly simplifying operation. Its controls are intuitive, eliminating the need for lengthy training. The machine also has a cleaning agent dosing system that ensures the precise amount of chemicals is used during each cleaning process. The unit is fitted with new maintenance-free gel batteries, which can be easily recharged using the integrated charger. The suction bar has been sandblasted, newly powder-coated, and equipped with new squeegee rubbers. It also features two new roller brushes. Cgjdeyrqy Depfx Aa Nsp The roller brush deck allows for the wet removal of coarse debris, such as wood splinters, by sweeping them into a dedicated coarse dirt container. The Kärcher B40 W Dose R55 is well-suited for daily cleaning of workshops, warehouses, or retail stores. Technical data: Working width: 55 cm Tank capacity: 40 liters (fresh/dirty water) Area coverage: approx. 2,000 m²/h

Condition: repair required (used), Year of construction: 2012, functionality: not functional, The battery needs to be replaced. Cgedpfx Aajyn I Tyo Nep

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: MDY2310/110, DY2310/014, The compact FOBA M1000 laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small production runs. In addition to the automotive industry and the metal, tool, and mechanical engineering sectors, this small and mobile universal marking machine is particularly suitable for medical technology, plastics processing industries, and contract laser marking (e.g., promotional items). The M1000 enables both small metallic and plastic components and series to be marked efficiently and with high-quality results. Operating in laser class 1, the marking station features a programmable Z-axis, a small work table, and a smooth manual or optionally electrically operated lift door that provides access to the interior from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Cgjdpfx Aaoym Rdlo Nep Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g., promotional items). The M-Series comprises advanced manual workstations for precise and economical laser marking of small to large and geometrically complex workpieces, as well as batches and small production runs. Two housing sizes (M2000 and M3000) and three models each (B: with work table; R: with rotary table; P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for marking alignment, mark inspection, and code reading. The highly productive R models: motorized Z-axis, 2-station rotary table; ideal for marking a variety of serial parts (e.g., automotive interior components, metal parts, tools, medical products such as implants or instruments). Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: MY2001/012, Y2001/019, The compact FOBA M1000 laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small production runs. In addition to the automotive industry and the metal, tool, and mechanical engineering sectors, this small and mobile universal marking machine is particularly suitable for medical technology, plastics processing industries, and contract laser marking (e.g., promotional items). The M1000 enables both small metallic and plastic components and series to be marked efficiently and with high-quality results. Operating in laser class 1, the marking station features a programmable Z-axis, a small work table, and a smooth manual or optionally electrically operated lift door that provides access to the interior from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Cjdpfxjym N Nmo Aa Njgp Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g., promotional items). The M-Series comprises advanced manual workstations for precise and economical laser marking of small to large and geometrically complex workpieces, as well as batches and small production runs. Two housing sizes (M2000 and M3000) and three models each (B: with work table; R: with rotary table; P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for marking alignment, mark inspection, and code reading. The highly productive R models: motorized Z-axis, 2-station rotary table; ideal for marking a variety of serial parts (e.g., automotive interior components, metal parts, tools, medical products such as implants or instruments). Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 2525797057901, • CMYK + Lc Lm + 2 x White • White in the pre- and postprint • Speeds up to 45 m²/hr. (500 ft²/hr) • Max. print size 2,54 x 1,54 m • Substrates up to 4,5 cm (1.77 in) thick. • Multiple board printing • Borderless printing • Shuttle safety sensors • For Digital Printers, Poster printers and Mid-Size Graphic Screen Printers Csdswh Si Hspfx Aa Nogp

Condition: ready for operation (used), Year of construction: 2013, Brand: HAKO Model: Scrubmaster B650 Year of manufacture: 2013 Capacity: 3200 m²/h Csdeyid Hcepfx Aa Njgp Scrubbing width: 65 cm Drive: 24V Clean water tank: 72L Dirty water tank: 74L Internal charger, 220 volts. At FLITS Rental & Sales you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly have the right machine. Do you have questions or would you like a non-binding quote? Please feel free to contact us:

Year of construction: 2015, condition: good (used), We constantly have a large selection of different KÄRCHER automatic scrubber dryers types B40 - B60 - B80 - B90... in different condition classes and price categories. Cedpfxofnqauo Aa Negp Talk to us and we will find the right machine for your application! You will also find sweepers and vacuums from the house KÄRCHER with us!

Condition: repair required (used), Year of construction: 2008, operating hours: 244 h, functionality: limited functionality, overall weight: 2,100 kg, Hako B1100 cleaning machine + sweeper With only 244 hours from 2008 2 brushes are included loose Device runs perfectly, battery OK Csdpfx Aaot T Ud Is Nogp incl. 36V charger Sold as a spare parts donor Item location is 75053 Gondelsheim See pictures Shipping via freight forwarder or collection only by appointment

Year of construction: 2010, condition: excellent (used), Thumm SU100 P current UV dip impregnation system with exhaust air cleaning system Current UV impregnation is an innovative dip process for low-voltage round wire windings.  In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow.  When the heated winding is immersed, the impregnating agent becomes thin and can thus penetrate into the smallest cavities.  With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can flow off again after dipping on the cooler stack of sheets. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the stack of sheets. The elimination of conventional oven drying saves energy and time. Together with the use of a low-emission impregnating agent, the environmental balance is very positive. Thumm electric UV dip impregnation system Type: SU100 P Stators: max. 250 mm Ø  Connected load: 15 kVA Fuse: 32A Connection: 3 phase 400 Volt 50 Hz Power supplies 2 x 50V / 280 A Thumm aerosol separator 400 V 1.85 KVA Complete plant closure, Cgsdpfxohuffco Aa Njp large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 1,451 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,245 mm, total width: 900 mm, total length: 1,796 mm, water tank capacity: 160 l, battery voltage: 24 V, noise level: 65 dB, battery capacity: 320 Ah, empty load weight: 815 kg, Ride-On Scrubber-Dryer Comac Optima 85B – Professional Cleaning Machine in Very Good Condition. The machine has been regularly used as a demonstration unit and, with 1,451 operating hours, is in very good and fully functional condition. Cjdpfx Aexw Rnkja Negp Technical data and features: - Model: Comac Optima 85B - Year of manufacture: 2018 - Operating hours: 1,451 h - Drive: Battery-powered (24 V) - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh/dirty water tank: 160 liters - Area coverage: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Incl. battery and charger (brushes not included) Condition: The machine is well-maintained and fully operational, with normal signs of use. All functions have been tested – the unit is ready for operation. Origin: The unit was acquired as part of an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: Technical specifications and descriptions are based on manufacturer information. All details have been provided to the best of our knowledge and belief, but without guarantee of completeness, accuracy, or specific features. The machine is sold as described and inspected, with warranty and liability for material defects excluded. Subject to prior sale, typographical errors, and mistakes.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, working width: 865 mm, area performance: 10,000 m²/h, total height: 900 mm, total width: 1,005 mm, total length: 1,796 mm, water tank capacity: 160 l, battery voltage: 24 V, noise level: 65 dB, battery capacity: 320 Ah, empty load weight: 838 kg, Ride-on Scrubber-Dryer Comac Optima 90S – Professional Cleaning Machine in Nearly New Condition. This machine was originally used as a demonstration model at trade fairs and events, which is why it has only 100 operating hours. It is in excellent condition and is fully operational. Technical Data and Features: - Model: Comac Optima 90S - Year of manufacture: 2021 - Operating hours: 100 h - Drive: Battery-powered (24 V) Cgedpoxw Rndjfx Aa Nsp - Brush width: 2 x 450 mm (total approx. 900 mm working width) - Clean/dirty water tank: 160 liters - Cleaning performance: up to 10,000 m²/h - Brush pressure: up to 150 kg - Complete with battery, brushes, and battery charger Condition: The machine is in a very well-maintained, nearly new condition. All functions have been tested – the unit is ready for immediate use. Origin: The unit was acquired in the context of an insolvency auction. It is an original Comac product. Country of manufacture: Italy Note: The technical information and descriptions are based on manufacturer data. All details are provided to the best of our knowledge, but no guarantee is given for completeness, accuracy, or specific properties. The machine is sold as described and inspected; warranty and liability for material defects are excluded. Subject to prior sale, typographical errors, and mistakes.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 133 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber-Dryer Comac C85 B NSC – professional cleaning machine in near-new condition. The machine was originally used as a demonstration model at trade fairs and events and has therefore only 133 operating hours. It is in excellent condition and fully functional. Technical Specifications and Features - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2020 - Operating hours: 133 h - Drive: 36 V battery powered - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh/dirty water tank: 300 litres - Area coverage: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Complete with battery, brushes and charger Condition: The machine is in very well-maintained, as-new condition. Cedpfx Ajxw Rmyoa Nsgp All functions have been tested – the device is ready for immediate use. Provenance: The unit was purchased as part of an insolvency auction. This is an original Comac product. Country of manufacture: Italy Note: The technical data and descriptions are based on manufacturer information. All details are provided to the best of our knowledge and belief, but without guarantee of completeness, correctness or specific characteristics. The unit is sold as described and inspected; warranty and liability for material defects are excluded. Subject to prior sale, typographical errors and mistakes.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 1 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber-Dryer Comac C85 B NSC – professional cleaning machine in near-mint condition. This machine was originally used as a demonstration model at trade fairs and events and therefore has only 1 operating hour. It is in excellent condition. Technical data and features: - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2020 - Operating hours: 1 h - Drive: 36 V battery powered - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh/dirty water tank: 300 liters - Area performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling Cgjdpoxw Rm Hofx Aa Nsp - Includes brushes - Battery and charger not included Condition: The machine is in a very well-maintained, as-new condition. Origin: This unit was acquired as part of an insolvency auction. It is a genuine Comac product. Country of manufacture: Italy Note: All technical data and descriptions are based on manufacturer information. The details are provided to the best of our knowledge and belief, but without guarantee for completeness, accuracy or specific properties. The machine is sold as described and inspected, with warranty and liability for material defects excluded. Subject to prior sale, typing errors and mistakes.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 36 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber Dryer Comac C85 B NSC – Professional Cleaning Machine in Nearly Mint Condition This machine was originally used as a demonstration unit at trade shows and events and therefore has only 36 operating hours. It is in top condition and fully operational. Technical Specifications and Features - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of Manufacture: 2019 - Operating Hours: 36 h - Drive: 36 V battery drive - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh/dirty water tank: 300 liters Cgjdoxw Rmmjpfx Aa Njp - Productivity: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Complete with battery, brushes, and charger Condition: The machine is in a very well-maintained, almost new condition. All functions have been tested – the unit is ready for immediate use. Origin: The unit was purchased as part of an insolvency auction. This is a genuine Comac product. Country of Manufacture: Italy Note: The technical data and descriptions are based on manufacturer’s information. All details are provided to the best of our knowledge and belief, but without guarantee of completeness, accuracy, or particular characteristics. The machine is sold as described and inspected, with no warranty or liability for defects. Subject to prior sale, typographical errors, and mistakes.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 2 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber Dryer Comac C85 B NSC – professional cleaning machine in near-new condition. This machine was originally used as a demonstration model at trade fairs and events and has only 1.5 operating hours. It is in top condition and fully functional. Technical Specifications and Equipment - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2020 - Operating hours: 1.5 h - Drive: 36 V battery-powered - Brush width: 2 x 430 mm (Total working width 850 mm) - Solution / recovery tank: 300 liters - Theoretical area performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Complete including battery, brushes, and charger Condition: Cgedpfx Ajxw Rmtja Njp The machine is in a very well maintained, almost new condition. All functions have been tested – the device is ready for immediate use. Origin: The device was purchased as part of an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: The technical specifications and descriptions are based on manufacturer information. All details provided to the best of our knowledge, but without guarantee for completeness, accuracy, or specific properties. The device is sold as described and inspected. Warranty or liability for material defects is excluded. Subject to prior sale, typographical errors, and mistakes.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 35 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber Dryer Comac C85 B NSC – professional cleaning machine in near mint condition. This machine was originally used as a demonstration model at trade fairs and events and therefore only has 35 operating hours. It is in excellent condition. Technical Data and Features - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2019 - Total hours: 35 h - Drive: 36 V battery-powered - Brush width: 2 x 430 mm (total working width 850 mm) - Fresh/dirty water tank: 300 liters - Area coverage: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Incl. brushes - Battery and charger not included Condition: The machine is in a very well-maintained, like-new condition. Origin: The device was acquired as part of an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: Codpfx Aajxw Rmae Negp The technical data and descriptions are based on manufacturer information. All details are given to the best of our knowledge and belief, but without guarantee of completeness, accuracy or any specific properties. The device is sold as described and inspected, with no warranty or liability for material defects. Subject to prior sale, typographical errors, and mistakes.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 266 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-On Scrubber Dryer Comac C85 B – Professional Cleaning Machine in Near-New Condition This machine was originally used as a demonstration model at trade fairs and events, thus it has only 266 operating hours. It is in excellent condition. Technical Data and Features - Model: Comac C85 B - Year of manufacture: 2019 - Operating hours: 266 h - Drive: 36 V battery-powered - Brush width: 2 x 430 mm (total working width 850 mm) - Clean/dirty water tank: 300 litres - Area performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Note: Brushes, battery, and charger are missing Condition: The machine is in a very well-maintained, near-new condition. Origin: The device was acquired as part of an insolvency auction. This is an original Comac product. Country of manufacture: Italy Cgedpfx Aasxw Rl Ns Njp Note: The technical specifications and descriptions are based on manufacturer information. All details are provided to the best of our knowledge, but without guarantee of completeness, accuracy, or any specific properties. The device is sold as described and as inspected; warranty or liability for material defects is excluded. Subject to prior sale, typographical errors, and mistakes.