Used Uv Varnish Machine for sale (64,423)

Condition: good (used), Heidelberg SBGZ for UV coating with dryer Max size: 56 x 77 cm Machine has roller for UV varnish Can make spot varnish and full varnish EMA UV Eko dryer Pjdpfx Afopwkgxjhogg Very good condition

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, compressed air connection: 8.5 bar, SCODIX ULTRA PRO. 2016 Nr. 3061 Only 2.2 mil Pgedewvi H Espfx Afhsg Scodix Foil Scodix Cast&Cure Bar code reader Scodix Technology Digital Print Enhancement with inline foil Roll Width (Min-Max) 50-500 mm, Number of Simultaneous Rolls Up to 4-rolls Hologram foil. Substrates: Offset, plastics, laminated, coated Substrate Format545 x 788 mm Substrate Range 135-675 gsm, up to 0.7 mm Compatibility: Speed (Max) 1,250 SPH

Condition: like new (used), Year of construction: 2024, operating hours: 74 h, functionality: fully functional, The machine has seen very little use and is in technically and visually like-new condition. No continuous or production operation, used exclusively for small batches. Immediately operational, on-site testing possible. Reason for sale: change in business operations. Ideal for start-ups, print shops, or companies seeking a nearly new, ready-to-use UV printing solution. Inspection and collection by arrangement possible. If you have any questions or require further information, please feel free to send us a message or give us a call. Pgjdpfx Asyc Hr Dofhog

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Podsxz Ewnjpfx Afhjgg

Condition: new, Year of construction: 2025, A laser marker that can operate anything? Indeed! This is the Wattsan UV TT, an ultraviolet marker that works with a variety of materials, including leather, ceramics, glass, rubber, wood, leather, fabric, gems, organic and electrical components. The Wattsan UV TT is suitable for QR-codes, bar-codes, data and time, and any other images. This marker can operate big workpieces; the scanning tripod can be taken off and placed on the deck. Additionally, you may alter the machine's functionality by just switching out the lenses! You can give our managers a call for additional details! Wattsan UV TT machine characteristics: Working area: from 75x75 to 300x300 mm Laser power: 3/5/10/15 W Machine size: 880x420x1000 mm Packing size: 960x500x1100 mm Weight: 82 kg Laser sourse: JPT Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Pjdpfsr D Ngtox Afhogg YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2017, condition: excellent (used), UV curing machine  The product is a machine that has been designed for curing silicone. Due to the UV curing, the machine can probably be used for other purposes as well. Manufacturer: Hereaus Curing: UV curing Operating voltage: 400 V Control voltage: 24 V Rated current: 16 A Fuse: 25 A Frequency: 50 Hz Year of manufacture: 2017 Among other components used: Heraeus P300MQ Motori Elettrici 71M/2 Motor Condition: used  Complete factory closure, wide range of storage platforms, pallet racks, shelf racks, paternosters. Pgjdpfx Afjg H Sywjhsg High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: repair required (used), Year of construction: 2017, operating hours: 15,939 h, functionality: limited functionality, machine/vehicle number: R678B751, number of ink cartridges: 8, color channels: CMYK, number of print heads: 2, I am offering for sale a flatbed plotter Mimaki JFX200-2513. Working area: 1300x2500 mm 2 print heads Currently, the machine is loaded with 2xCMYK; conversion to CMYK+W+C is possible. Pjdpfxexzpvzj Afhegg Low usage: 4916 m2 The machine has mechanically damaged print heads. Printing is possible, but banding starts to appear relatively quickly.

Condition: used, Year of construction: 2001, functionality: unexamined, machine/vehicle number: RV014301, Year: 2001 Maximum sheet size: 1050 x 750 mm Pgsdpfsxy E Dxex Afhog Minimum sheet size: 420 x 297 mm Maximum printing size: 1050 x 730 mm Sheet thickness: 0.075 - 0.8 mm Maximum feeder height: 675 mm Maximum feeder capacity: 600 kg Feeder speed: 400 - 3,000 sheets/hour Screen frame outer dimensions: 1300 x 1170 mm UV dryer Equipped with: - Stream Feeder - Pull Side Lays - Suction Feed Belt - Deep Pile Delivery - Natgraph 2-lamp UV dryer with hot air module - Trumax Hyperstack Technical specifications: Maximum mechanical speed: 1,000 - 3,000 sheets/hour Maximum sheet size: 1,020 x 720 mm Minimum sheet size: 560 x 370 mm Printing speed (IPH): 900 ～ 3,300 Print thickness: 0.1 ～ 0.8 mm

Condition: used, Year of construction: 1988, machine/vehicle number: 1743, UV-Beschichtungsmaschine - UV-Coating machine Billhöfer Gula Speed CGS JKN 112Year 1988 - Serial-No. 1743 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Pgedpfx Afjh Axqushjg Grammatur 60 up to 500 gr/m2 card board Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1982, UV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV-112Year 1982 - Serial-No. 9035 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card boardUV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Pgodeh Ayfpspfx Afheg

Year of construction: 1985, condition: good (used), COMPLETE COATING LINE WITH THE FOLLOWING POSITIONS: 1 HYDROPRIMER SPREADER 2 OVEN WITH UV LAMPS + IR 3 DOUBLE COATER WITH REVERCE 4 UV LAMPS 5 DOUBLE COATER 6 UV LAMPS 7 DMC SANDER Pgedok Scufjpfx Afhog 8 CONVEYOR 9 COATING MACHINE TOUCH-UP DYE SORBINI 10 IR LAMPS 11 FINISHING ROLLER 12 UV LAMPS 13 EXIT CONVEYOR

Condition: used, Year of construction: 2021, operating hours: 3,105 h, functionality: fully functional, number of ink cartridges: 5, color channels: C M Y K W, number of print heads: 3, resolution (max.): 1,200 dpi, total length: 6,500 mm, total width: 960 mm, total height: 1,500 mm, space requirement length: 7,500 mm, space requirement width: 2,000 mm, space requirement height: 2,000 mm, type of input current: three-phase, input current: 13 A, input voltage: 220 V, Refretonic - MTu- Tech Large Format UV printer with white color 3x Ricoh gen 5 print heads byhx mother board Psdpfxowpuwco Afhsgg Print speed 10 - 25m2 /h

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, number of ink cartridges: 5, number of print heads: 15, resolution (max.): 600 dpi, paper weight (min.): 80 g/m², paper width (min.): 220 mm, paper width (max.): 340 mm, The machine is fully operational, printing 140,000 linear meters per month. All basic materials are running without issues. The machine is under full gold service with Xeikon. Podpfxoxlicio Afhegg

Condition: ready for operation (used), Refurbished - 2008 Pgodpfx Aoxhfwusfhjg UV - full or spot TG Color system

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm Pgjdpfx Aoydvzdsfhog ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Psdjya H Nkepfx Afhsgg Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe Pgedpfxsyaywhj Afhsg ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Pedpfx Ajx Tiq Ssfhjgg Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Psdpjx Utd Esfx Afhsgg Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Pgedeiit Erjpfx Afheg Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: excellent (used), Year of construction: 2021, turning diameter over cross slide: 840 mm, turning length: 6,000 mm, spindle bore: 105 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 7,000 m/min, 3 chuck SCHUNK ROTA-S Plus 500-102 3 x Steady rest fixed Revolver VDI Duplomatic Siemens 840 DSL This type of lathe is commonly used in industries like: Oil & gas (pipe threading, tool joints) Steel industry (roll turning)  Power generation (turbine shaft turning)  Heavy machinery manufacturing DBC Turning Length: 6000mm Swing over bed Ø: 840mm Swing over cross slide Ø:570mm Spindle bore: 105mm Spindle power: 33kW Pgjdpfx Afjx Sqaxsheg Bed width: 450mm Tailstock spindle Ø: 220Ø Spindle taper: 5Mk Speeds / ranges: 1200Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 7000mm/min. Workpiece load: 2500 Length: 9500mm Width: 2300mm Height: 2300mm Weight: 8600kg

Condition: new, Year of construction: 2023, functionality: fully functional, 5-axis travelling column machining centre - SAMAG SFZ3500- with swivel head and internal rotary table (Ø:1000mm, interference Ø:1300mm) X:3500mm Y:1000mm Z:1000mm Spindle: SK50 max. 12,000rpm 54kW Tool changer: 60 Podpfxettv Has Afhegg Control: Heidenhain TNC7 Coolant system with paper belt filter Internal coolant supply: 40bar (max. 80bar) Internal air supply through the spindle 3D touch probes Collision monitoring (DCM) Kinematics Opt The machine is available at short notice and can be inspected and tested at the factory.

Condition: used, Manufacturer: Hanovia UV Model: PMS150G4/4 Type : Ultraviolet disinfection system Pgjdpfx Afsx R A Ilshsg Application: Ultraviolet (UV) water/liquid treatment Pressure rating: 7 bar Maximum pressure loss: 0.15 bar Maximum flow rate: 133 L / min - 8 m3/hour Temperature: 80°C

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Pgjdpsxftqdofx Afhog Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: excellent (used), Year of construction: 2014, color channels: 9, Vutek GS 5000R Year: late 2013 (in production from 2014) Very low usage Only 30,000 m² per year (no mesh) 8 colors + White (ideal for backlit applications) Fully equipped Print width: 3 x 1.6 m – 3.2 m – 5 m * 3–6 month warranty possible Delivery: we can Installation: we can Training: we can Service: we can Parts: we can Pedpfewy Um Eox Afhjgg