Used Vacuum Tubes for sale (5,285)

Condition: used, Edwards Maglev turbomolecular pump STP XA4503C (moz8950) + SCU1500 Controller. Fully tested. Dwsdpfsztbhtjx Anzsa

Condition: used, Edwards Maglev turbomolecular pump STP XA3203C + SCU1600 Controller. Fully tested. Dwsdpfxjztbgvs Anzoa 4 sets available. (EUR 10,500/set)

Condition: good (used), Vacuum pyrolysis cleaning oven, vacuum pyrolysis oven, pyrolysis oven, cleaning oven, vacuum oven -Vacuum pyrolysis cleaning oven: Vacuum pyrolysis oven -Type: unfortunately without a type designation -Entrance opening: Ø 600 mm -Interior dimensions: Ø 600 x 2480 mm -Vacuum pump: 2.35 kW 1.33 m³/min -Individual components: see photos -Dimensions: 5200/1635/H1760 mm Dsdpfx Aozpii Denzowa -Transport dimensions: 3200/1635/H1760 mm / 2000/650/H610 mm -Weight: 1210 kg

Condition: used, Year of construction: 2016, total length: 1,200 mm, total width: 800 mm, total height: 1,400 mm, Empty weight: 150 kg Dwsdpswgxh Hsfx Anzoa - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: C34567 - Transport dimensions: 1200mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, total length: 1,040 mm, total width: 550 mm, total height: 450 mm, - Documentation available: No - CE certificate present: No Dwjdpoxm Rgxsfx Anzea - Transport dimensions: 1040mm x 550mm x 450mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Vacuum pump, rotary vane pump, sliding vane pump, vacuum pump, cleanroom pump BECKER Type VX 4.40 High Vacuum Pump Serial No.: 2583674 Year of manufacture: 2011 Capacity: 40 m³/h Vacuum: -0.8 bar (determined during test run) Vacuum: -0.9 bar (manufacturer's specification) Suction connection: G 3/4" Motor speed: 1420 rpm Motor power: 1.25 kW Dwjdpfx Aozrzyaonzoa Power connection: 400 Volt, 50 Hz - dry-running, oil-free rotary vane vacuum pump - sound insulation made of polystyrene (Styrofoam) Dimensions with sound insulation housing L x W x H: 820 x 460 x 350 mm Dimensions without sound insulation housing L x W x H: 540 x 250 x 280 mm Weight: 45 kg Very good condition

Condition: excellent (used), first registration: 09/2009, tire condition: 50 %, color: other, suspension: air, Year of construction: 2009, Equipment: ABS, = Additional options and accessories = - air suspension - Hydraulics = Remarks = Dwodjzcbq Uepfx Anzoa Superstructure Tank capacity: 20000 liters = More information = Tyre profile: 50% Brakes: disc brakes Suspension: air suspension Technical condition: very good Visual appearance: very good

Condition: used, power: 1.5 kW (2.04 HP), Pipe diameter: 300 mm Length: 6,000 mm 2 unbalanced motors, each with 0.75 kW Dwodezr Nbropfx Anzoa

Condition: used, 1 unit – Model LPHY 60520, with 37 kW electric motor 1 unit – Model Z8220 KK Dsdpfxszr H R Re Anzswa

Condition: excellent (used), Year of construction: 2020, operating hours: 1,470 h, functionality: fully functional, fuel type: electric, color: grey, CLEANsweep CS 5110 EH / Stolzenberg Twin Top TT 1100 / E – Ride-on sweeper-vacuum cleaner CLEANsweep CS 5110 EH / Stolzenberg Twin Top TT 1100 / E – Year of manufacture 2020 | approx. 1,470 operating hours | Gel batteries | new side and main sweeping rollers | new drive chains | high-dumping system | adjustable speed of side brushes | solid rubber tires | incl. charger | sweeping width 1100 mm | Tandem roller system TWS | 4.5 h runtime | 1320 W drive Technical data: Manufacturer: CLEANsweep Model: CS 5110 EH Condition: very good Year of manufacture: 2020 Operating hours: approx. 1,470 h Sweeping roller width: 700 mm Total sweeping width: 1100 mm Tandem roller system: TWS Turning radius: 1.2 m Drive: forward & reverse / differential rear-wheel drive Dirt container: 90 L Filter cleaning: electric Cleaning area: up to 12,000 m² Sweeping performance: 6,600 m²/h Climbing ability: 20 % Runtime: 4.5 h Drive: 1320 W / 4x 6 V 180 Ah battery Charger: included Dust extraction: 900 m³/h Material: impact-resistant PE plastic Dsdpfx Anezrzgmjzjwa Equipment: Gel batteries, new side and main sweeping rollers, new drive chains | high-dumping system | adjustable speed of side brushes | solid rubber tires | incl. charger Highlights & Equipment: - Professional sweeper-vacuum cleaner – ready for immediate use - Gel batteries, new side and main sweeping rollers, new drive chains, high-dumping system, adjustable speed of side brushes, solid rubber tires - Tandem roller system (TWS) – excellent cleaning performance, even with fine dust & sand - Working width 1100 mm – high area performance up to 6,600 m²/h - Electric filter cleaning – consistently high suction power - Robust PE housing – impact-resistant & durable - Ideal for indoor & outdoor use – versatile - Very well-maintained condition – immediately available Areas of application: ✓ Industrial halls & storage areas ✓ Car parks & underground garages ✓ Workshops & manufacturing ✓ Outdoor cleaning of areas & paths ✓ Agriculture & municipal services Location: Warehouse D-46514 Schermbeck (NRW) – inspection & collection possible Delivery: throughout Germany & internationally on request Price: ex warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to errors and prior sale. Prices plus VAT / VAT excluded Other models available! ➡️ New & used machines, accessories & spare parts Buy CLEANsweep CS 5110 EH | Electric ride-on sweeper | Used sweeper-vacuum cleaner | Industrial sweeper | Ride-on sweeper for indoor & outdoor use | Battery-powered sweeper | Stolzenberg Twin Top | Sweeper-vacuum cleaner for warehouses | Cleaning machine 1100 mm | Ride-on sweeper with high-dumping system | Electric industrial sweeper Your reliable partner for cleaning technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Request now & secure immediately available machines! If required, we will gladly arrange a virtual inspection of the machine via video call.

Condition: good (used), functionality: fully functional, Can diameter range: 52 mm – 99 mm Dwedpfozpyfvex Anzea Can height range: 50 mm – 140 mm Number of stations: 15 Capacity: up to 200 – 225 cans per minute

Condition: excellent (used), New generation Lutetia Type 40 vacuum tumbler direct from recently closed cooked meats factory. In beautiful condition. Dsdpozika Dsfx Anzowa

Condition: excellent (used), Lutetia Type 2 vacuum tumbler. New generation machine in lovely condition. Direct from closed cooked meats factory. Dodjzii Uyepfx Anzewa

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Process Description The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Dodpfx Aszcwitonzswa Full documentation for equipment available.

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. CE marking. No inspection book available. Suction cup rubber replaced. As new condition. Dsdpsv S Synefx Anzswa The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, shaping, form veneering, edge banding, etc. With some limitations, you can certainly do without a hydraulic veneer press with this press. New heat-resistant silicone membrane, extremely flexible and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with a capacity of 40 m³/h and two vacuum tanks of 200 liters each, ensuring comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which switches off the pump when the target negative pressure is reached, preventing continuous operation. Movable on four swivel casters, lockable. Frame can be easily folded up and is locked with two bolts. Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been retouched. The silicone membrane and the base plate have been renewed; the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (LxWxH). Weight approx. 550kg. Dwjdpfxey Hl Hps Anzja The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: used, mileage: 148,961 km, power: 251 kW (341.26 HP), first registration: 05/2017, fuel type: diesel, empty load weight: 10,440 kg, maximum load weight: 7,560 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 4,200 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 8,350 mm, loading space volume: 10 m³, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, traction control, Vacuum tanker Kanal Müller VM F 100K No. 11605700, tipper, 10,000 litres, tipper, CVS Vacustar W1300R, suction hose reel. Non-binding offer – subject to change and prior sale – sale is made without any warranty – all information provided without liability! Dodpfx Ansymxf Rezswa

Condition: good (used), Direct from closed cooked meats factory. Nice automatic line consisting of auto belt vacuum packer feeding into auto dip tank. Djdjzia Sispfx Anzowa

Year of construction: 2010, condition: excellent (used), KRAMER Gmbh Dust Collection Filter Year: 2010 Total capacity: 70,000 m3/h Dodpfxsh D E Rds Anzewa The system can be used independently as 2 filters, each with a capacity of 33,000 m3/h.

Condition: reconditioned (used), overall weight: 30 kg, chuck outer diameter: 200 mm, three-jaw chuck diameter: 200 mm, short taper mount: 6 mm, through hole: 45 mm, Three-jaw power chuck without step-jaw cheeks Manufacturer FORKARDT KTNCV 200-45, Three-jaw power chuck; the listed price applies to 1 three-jaw chuck. ----- Jaw stroke is achieved via clamping cylinder and draw tube. Chuck No. 1485270 with through-hole clamping. ----- Required cylindrical flange mounting according to DIN 55027 Short taper, taper size: KK6 ----- Three-jaw power chuck with quick-change system also suitable for reversible base jaws, type: FGB 200 Dwjdszrmzpjpfx Anzoa ----- Jaw interface: Base jaw type: helical gear; Designation → Size: FGB200, SGB200 ----- Draw tube connection M52 x 2 mm Cylindrical mounting for spindle flange ø 170 x 6 mm Mounting hole circle for 3x cap screws approx. 135 mm ----- The chuck is in like-new condition. Weight without clamping jaws approx. 25 kg ----- Delivery without base and top jaws *We are available for any questions. *Shipping costs abroad upon request.

Condition: new, new ! twin shaft paddle mixer all stainless steel variable speed microcontroller 13,2 kW Max. loading volume: ± 500L 2 mixing directions inspection gantry safety lid Dwodpszly Atsfx Anzea Easy clean CE-approved with vacuum pump Büsch 6,2 kW + Loader for eurobins

Condition: used, twin shaft paddle mixer Dsdpjzlyzijfx Anzewa suitable for vacuum useful loading volume : ± 2.600L 2 discharge guards with new control box power ± 30 kW dimensions : ± 2.650 x 2.300 x 2.400 mm

Condition: used, Schmalz V2 40/70 vacuum pump for generating negative pressure for clamping, lifting and vacuum systems in woodworking. The pump is suitable for use on CNC machines, vacuum tables and automated handling systems. Robust design for reliable industrial use. Technical data: Dodpfx Anszrxt Dozowa - Power supply: 220/380 V - Motor: 1.1 kW - Pressure: max. approx. -1 bar

Year of construction: 2023, condition: new, 1 x Niro-Tech vacuum tumbler / mixer with Micro-controller. Model - MS-700 V. Dwedpfx Ashr Rpronzsa Capacity - 700 litres. Max product input - Up to 420kg depending on product. Speed control - 1-9r./min. Installed power - 0.75kW. Vacuum pump power - 0.75kW. Efficiency of vacuum pump - 40m3/h Electrics - 400v, 50hz, 3 phase. Manufactured in AISI 304 stainless steel. Brand new, made to order. Supplied with 12 month warranty. Please allow a lead time of up to 10 weeks for the manufacture of this machine.

Condition: used, Year of construction: 2013, length / mm width / mm height / mm Becker Vacuum Clamping System U 3.6 S-09 – 230 V – Year 2013 – Complete with Vacuum Pump, Vacuum Tank & Vacuum Table For sale is a complete Becker vacuum clamping system consisting of a Becker vacuum pump, model U 3.6 S-09, a vacuum tank (reservoir), a vacuum clamping table, and the mounting accessories shown in the photos. The system was previously used in an industrial environment and is ideal for CNC routers, machining centers, woodworking, plastics processing, fixture holding, and other vacuum clamping applications. Technical Specifications Manufacturer: Becker Model: U 3.6 S-09 Year of Manufacture: 2013 Power Supply: 230 V, Single Phase Motor Power: 0.30 kW (50 Hz) / 0.36 kW (60 Hz) Speed: 1380 / 1650 rpm Inlet Capacity: 6.4 / 7.4 m³/h Maximum Vacuum: 10 mbar Protection Class: IP54 Scope of Delivery Becker vacuum pump U 3.6 S-09 Vacuum tank / reservoir Vacuum clamping table Clamping rails Mounting and clamping accessories (as shown in the photos) Dwjdezn Aiuopfx Anzea Condition The vacuum clamping system is in good used condition with normal signs of wear consistent with industrial use. It was removed from a fully operational machine. The sale includes everything shown in the photographs. Inspection is welcome by appointment. Shipping or collection can be arranged by mutual agreement. Plate size: 440 x 280 x 50 mm