Used Vertical Jig Boring Machine for sale (66,295)

Condition: like new (used), CNC vertical jig boring machine WMW MIKROMAT Travel X: 1120 mm Travel Y: 710 mm Spindle travel Z: 315 mm Travel W: 630 mm Iiedsz Nxmdepfx Am Dsh Numerical Command: CNC NUM 1060 Spindle: Ø 125 mm Cone: SA40 Rotation: from 36 to 2240 RPM Table size: 1400 x 900 mm Distance between colums: 1080 mm Maxi distance spindle nose/table: from 0 to 900 mm max Maxi eligible load on table: 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage: 380 V Dimensions (L x W x H): 4000 x 2460 x 3030 mm Weight: approx. 9 T

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Isdpfx Amsz St Hwo Doih Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light.

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Iedpfx Amoz R Rbde Doih Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 High-precision drilling machine / jig boring machine with extensive accessories. Includes tools worth over 12,000 EUR! Made in Bienne/Biel, Switzerland Excellent condition! Coordinate drilling machine / jig boring machine with tool package (see photos) in very well-maintained, exceptional condition, second owner (41 years in current ownership). This quality will never be produced again! The coordinate drilling machine features the rare option of motorized table drive / rapid traverse in the X and Y axes and a potentiometer. The stepless feed in the X axis also allows for light milling and surface milling. This eliminates the need for laborious manual cranking, as is the case with all other Hauser coordinate drilling machines. Furthermore, it has the rare thermal stabilization and expansion compensation. For this purpose, 2 heaters are provided, which can and must be switched on separately before starting work and to maintain high accuracy and dimensions. This explains the factory-high positioning accuracy of 0.002 mm with a resolution of 0.00. It should be noted that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage for precise drilling and surfacing in depth with Wohlhaupter, spindle tools, etc. With the mentioned options and in this first-class condition, it is very rare and highly unlikely to be available again. These machines are mainly used in the watch industry, gunsmithing / defense industry, precision engineering, material testing and the optical industry, where the highest precision is required. Also ideally suited for engine construction / overhaul, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are available in their original form! Ijdpfx Amjzuvwlj Deih Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X axis = 400 mm, transverse travel Y axis = 250 mm, Vertical travel Z axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle connection MK 2, stroke of the drilling spindle (Z axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds stepless from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 steps from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 hp Machine dimensions: Length = 1400 mm, width = 1250 mm, height = 1750 mm, machine weight approx. 1500 kg. Payment for the machine is made, as is customary for used machines, net before loading, no partial or installment payments! Special price due to business closure. Shipping (direct transport without reloading) within the EU is possible. Price net export within EU. Example: Secure shipping by direct transport (without reloading!) to France / Spain / Italy, etc. up to 1700 km driving distance approx. 1100 - 1450 EUR.

Condition: used, Year of construction: 1988, machine/vehicle number: 13.088.094, travel distance X-axis: 420 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 120 mm, spindle speed (max.): 9,000 rpm, controller model: HEIDENHAIN TNC 155, drilling depth: 120 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range, X-axis: 420 mm Travel range, Y-axis: 240 mm Travel range, Z-axis: 120 mm Travel range, A-axis: ± 30,000 ° Table clamping surface: 780 × 230 mm Drill head adjustment range: 450 mm Spindle speed: 50–9,000 rpm Spindle motor drive power: 3.7 kW Drilling capacity in steel: 20 mm Drilling depth: up to 120 mm Rapid traverse, X-axis: 7 m/min Feed rate, X-axis: 7,000 mm/min Rapid traverse, Y-axis: 7 m/min Iisdpfx Asz Ilu Rsm Dsh Feed rate, Y-axis: 1–7,000 mm/min Feed rate, Z-axis: 0.02–0.30 mm/rev Rapid traverse, A-axis: 10,800 °/min Feed rate, A-axis: 1–10,800 °/min MACHINE DETAILS Control system: HEIDENHAIN TNC 155 Operating voltage: 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,200 x 2,000 x 2,400 mm Weight: 2,000 kg EQUIPMENT Built-in workshop drawer cabinet Hand tools Milling cutters Matching tool holders Collets External Reference: C.O. - Lot 23

Year of construction: 1986, condition: excellent (used), functionality: fully functional, Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm Ijdpfozzw U Esx Am Djih table load 1500 kg tool taper SK 45 spindle turning speed range 2400 U/min spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Additional information Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Spindle taper BT40, Iiedpsz Eh Nljfx Am Doh 30 station ATC, through spindle coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Iisdpfx Aezi Awhsm Doh Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Iedpfx Amez Nxlto Dsih Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth: 2500 mm Total height: 2600 mm Weight: 4,5 T

Year of construction: 1985, condition: used, spindle diameter 110 mm x-travel 900 mm y-travel 600 mm z-axis 200 mm table length 1020 mm Iiedpjt Hwyxjfx Am Djh table width 860 mm taper MK 40 Table size, approx. 1,020 x 860 mm Max. weight of workpiece 800 kg Table travel, longitudinal, max. (X) 900 mm Boring head travel, cross, max. (Y) 600 mm Boring spindle stroke (Z) 200 mm Vertical travel of cross beam (W) 635 mm Vertical distance between table and boring spindle 15 - 850 mm Distance between columns 950 mm Spindle Ø 110 mm Spindle taper internal/external ISO 40 18 spindle speeds 10 - 2,500 rpm Milling feeds of table, infinitely variable 1 - 6,000 mm/min 4 milling feeds of boring head 30 - 180 mm/min 6 boring feeds 0.01 - 0.39 rpm Accuracy of all 3 axes when the machine was new 0.003 mm Quick feeds for table, boring head slide, and boring spindle, max. 6,000 mm/min Spindle drive 6.2 kW Weight, approx. 9,000 kg Total electrical load 15 kW - 380 V - 50 Hz Accessories / Special Features - BOSCH CNC Control, Model MICRO 8, in 3 axes, with monitor. Program input is either manual or via cassette, or via interface entry. - Digital display for Z Axis. - Separate switch cabinet. - Various tools. - Oil cooler for spindle lubrication.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: F310Y, total height: 3,210 mm, total length: 4,640 mm, total width: 3,340 mm, Technical details: - Spindle diameter (axially fixed): 120mm - Variable spindle speeds: Range 1 - 10 to 465 RPM, Range 2 - 45 to 2150 RPM - Nominal power at the spindle: 8kW (temporary overload permissible up to 11kW) - Nominal torque at the spindle: 98 kpm (temporary overload permissible up to 134kmp) - Max absorbed power: 25kW - Dimensions of the standard tableL 840 x 1000mm - Max recommended load: 1200kg - Table rotation in both directions: continious through 360 degrees - Transverse stroke of the table (X axis): 900 (+20) mm - Longitudinal stroke of the table (Z axis): standard Z - 760 (+20)mm, increased Z - 975mm (+20 outside the graduation) - Min.and max. distance spindle flange/table centre (without spindle adaptor): standard Z - 430/1190 (+20)mm, increased Z - 455/1430 mm (+20 outside the graduation) - Vertical stroke of the headstock (Y axis), min. and max. height of the spindle axis above the table: standard Y - 50-710 (+20)mm, increased Y - 50-960 (+20)mm Isdjun Siwjpfx Am Deih - Hydraulic infinitely variable working feeds in manual mode - 6 to 630mm/min - Rapid traverse - 6m/min - Precision of optical reading: linear axes - 0,001mm, manual rotary axis - 1 sec.arc - Positioning accuracy refered to built-in master scales +/- 0.0015mm; +/- 2 sec.arc - Weight of the machine: 12 t Extras: Includes various tool holders, rotating table, user manuals

Condition: used, Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Isdpoz Nwcdofx Am Dsih Travel X: 500 mm Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Variable speed drive for X - Y Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Weight: 3 T

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, spindle speed (max.): 2,000 rpm, table length: 1,100 mm, table width: 842 mm, X axis: mm 1.000 Y axis: mm 700 Spindle travel: mm 300 Table dimensions: mm 1.100 x 842 Spindle speed: rpm 40 – 2.000 Spindle cone: MT 4 Max power: kW 10 Max loading on table: ton 1 Isdjzizgbepfx Am Dsih Machine weight: ton 15 EQUIPPED WITH A LOT OF ACCESSORIES

Condition: excellent (used), Year of construction: 1984, functionality: limited functionality, machine/vehicle number: B30157, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, table length: 600 mm, table width: 380 mm, table load: 300 kg, spindle mount: MK 3, total height: 2,545 mm, total length: 1,700 mm, table height: 965 mm, total width: 1,330 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 900 m/min, rotational speed (min.): 30 rpm, rotational speed (max.): 2,500 rpm, drilling capacity: 30 mm, type of input current: three-phase, quill stroke: 140 mm, quill diameter: 85 mm, spindle diameter: 100 mm, spindle motor power: 8,200 W, workpiece weight (max.): 300 kg, rotary table diameter: 200 mm, Additional specs: Resolution: 0,001mm Max. capacity of boring: 220mm Machine weight: 2500kg Additional equipment: - One rotating table with two rotating axis. Iodpfx Aeungrgom Doih - Collets, clamping elements miscellaneous, tool holders. - Documentation for machine

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 2172, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 300 m/min, table length: 1,120 mm, table width: 630 mm, total length: 2,760 mm, table height: 2,800 mm, total width: 3,306 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 1 m/min, drilling capacity: 30 mm, Dimensions of the working surfaces: - Maximum stroke of spindle - min.270mm Isdpfounrhaex Am Deih - Spindle extension - 710mm - Distance from spindle end to working table - least 200mm greatest 750mm - Internal spindle cone acc.to GOST 15945-70 - metric 45 - Machine weight (without electrical equipment and accerssories) - 6890kg Table and skids: - Nr.of table slots - 7 - Securing the table and sleds - mechanical - Screen counting method - optic - Screen resolution value- 0,001mm Spindle: - Boring capacity: 250mm - The accuracy of processing a given size at a feed rate no more than 150mm/min - 0,2mm - Force allowed by the feed mechanism - 600kgs - Spindle RPM limits (within two gears): 1st gear- 32-400 RPM, 2nd gear - 160-2000 RPM - Maximum vertical mechanical displacement - 330mm Extras: coilets, tool holders, other additional equipment, documentation for machine

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Fanuc Series 18-M, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Iiedpfx Amoz Ir Iwj Dsh Travel range, X-axis: 500 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Rapid traverse rate, X-axis: 30,000 mm/min Rapid traverse rate, Y-axis: 30,000 mm/min Rapid traverse rate, Z-axis: 30,000 mm/min Table length: 650 mm Table width: 500 mm Spindle speed: 10,000 rpm Speed ranges: 2 Spindle interface: ISO 40 Tool positions: 30 Tool selection: Random MACHINE DETAILS Control system: Fanuc Series 18-M Coolant pressure: 20 bar Dimensions & Weight Dimensions (L x W x H): 3,140 x 2,090 x 2,900 mm Weight: 7,000 kg

Condition: used, functionality: fully functional, Jig boring/Milling machine HAUSER OP3 Travel X: 400 mm Travel Y: 250 mm Travel Z: 400 mm Cone: CM2 Spindle exit: 130 mm Spindle speedfrom 60 to 3000 RPM Table size: 590 x 320 mm Maxi distance spindle/table: 570 mm Drilling capacity in steel: 20 mm Scale 2 axes MITUTOYO Auto descent: 0,03 mm/min - 0,06 mm/min Variable speed drive at the spindle Voltage: 220 V Tri Width: 1600 mm Isdpfx Ajz Synbom Deih Depth: 1600 mm Total height: 1600 mm Weight: approx 1,4 T Machine supplied with many accessories (see photos)

Condition: good (used), Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel paths: Z 330 mm/Y 410 mm/X 630 mm -Quick stroke: 155 mm -Recording: MK4 Iiodpsd Tk Stofx Am Djh -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 4,300 h, DOOSAN T3600D VERTICAL MACHINING CENTRE YEAR: 2021 CONTROL: FANUC i PLUS X TRAVERSE: 520.0mm Y TRAVERSE: 360.0mm Z TRAVERSE: 350.0mm MAX. SPINDLE SPEED: 12,000 rpm Iisdpfoz R T D Ujx Am Dsh TAPER: BT30 X-Y RAPIDS: 48.0m/min Z RAPID: 56.0m/min MAX.CUTTING FEED RATE: 28.0m/min TABLE SIZE: 2 X 650 X 375.0 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,214 h, functionality: fully functional, machine/vehicle number: 111146, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain 530, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Spindle nose – table: 120–730 mm Table size: 1,250 × 610 mm T-slots in table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Speed: 60–10,000 rpm Torque: 332 Nm Power: 13 kW (40 %) Rapid traverse rate X/Y/Z: 32 m/min Feed rate: 1–12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Iodez Im Tnspfx Am Doih Tool holder: SK40 Pull stud: DIN 69871/72 Tool changer: 30 stations Tool change time: 1.5 s Tool weight: max. 7 kg Tool diameter: max. 76 mm Tool diameter with free magazine slot: max. 140 mm Tool length: max. 300 mm MACHINE DETAILS Control system: Heidenhain 530 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air: 3/8″, 6–8 bar Power supply: 400 V / 75 A / 35 kVA Coolant tank: 250 l Guideways X/Y/Z: 45/45/45 mm Machine weight: 7,500 kg Internal cooling (IKZ): 22 bar Program runtime: 12,214 h Spindle hours: 14,123 h Machine operating hours: 39,242 h Control system operating hours: 34,987 h EQUIPMENT Chip conveyor Electronic handwheel Internal cooling (IKZ) 22 bar Oil-cooled spindle Linear guideways X/Y/Z Machine bed made of cast iron Note: Machine is sold without tools and vise.

Condition: good (used), Year of construction: 2015, Traverses X Y Z: 1050 x 530 x 510mm, Table 1300 x 550mm, Spindle speed 0 - 12000 rpm, Spindle taper Din 40, Spindle Motor 18.5kW, 30 station ATC, Mazak Matrix Nexus 2 control, swarf conveyor, coolant, Low Volt light Isdpfxsz Sqwme Am Deih

Condition: excellent (used), Year of construction: 2019, Traverses XYZ: 762 x 508 x 508mm, 500mm x 500mm table, Iisdpfx Amsz Sqqme Djh max table weight 300kg, table tilt +110°, -35°, 22.4kW, 15000rpm, BT40, 40 station tool changer, Through spindle coolant, Tool Setter, Programmable coolant,

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1160235, SPECIFICATION Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg   MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger High speed machining Co-ordinate rotation and scaling Rigid tapping Filtermist extraction system Programmable coolant nozzle Isdpfszz Ndrjx Am Deih Lighting Guarding

Condition: excellent (used), HAAS Mini Mill 2 Vertical Machining Centre Iodpfxoz N Alwe Am Doih Year 2010 Serial number 1081104 X axis travel 508 mm Y axis travel 406 mm Z axis travel 356 mm Table size 1,016 × 356 mm Maximum table load 227 kg Spindle nose to table 102–457 mm Maximum spindle speed 6,000 rpm Maximum spindle power 5.6 kW / 7.5 hp Spindle taper 40 taper — CT40 or BT40 to confirm Automatic tool changer 10 station

Condition: used, Quill for jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, Iedpfx Amefc R D Ij Dsih -Stroke: 60 mm -in: a wooden box -Dimensions: 390/340/H170 mm -Weight: 15.8 kg