Used Vibration Techink for sale (1,849)

Condition: ready for operation (used), Vibrating Chute Kleemann. Dim. Vibrating Chute: Length 3600 mm – width 1100 mm. Ijdpfxenac R Dj Ag Noih Driving: 2 pieces vibration motors of each 4 kW. Incl.: Rubber Springs

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. Ijdpfoxppwnox Ag Njih 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), functionality: fully functional, Vibrating screen, used only a few times. Iijdsxl S Tkopfx Ag Nsh

Condition: used, Number of boring spindles 3 St. Number of tools 1.3/4.1. St. Spindle diameter 50,40 mm Spindle length 120,320,125 mm weight 2500 kg Iijdpfxsxpi Elj Ag Njh loading dimensions L x W x H 3800x1400x2000 mm table length 3470 mm Weinig Univar 6 P to be sold on behalf of our customer ----- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body made of heavy, torsion-free and vibration-damping elements. Stops on the right in the profiling area made of Pertinax. Before Profiling spindle a split stop with sliding bar for short parts. Additional opening rail for large format frames. Feed system: Continuous, chainless feed equipped with rubber rollers. Blow-off device for feed rollers and table. Spindles, hood: Spindles with high concentricity and dynamically balanced. Extraction hoods designed for the cheapest chip flow. Easiest tool change Quick-opening hood lid. Machine operation, setting aids: Operating the machine from the front. Setting the stops for Tool diameter using mechanical number display. Machine electrics, motors, controls: Electrical design according to DIN VDE 0113 - Electrical equipment from Industrial machines EN 60204 IEC 204-1. Further electrical regulations are not taken into account. Engines dynamically balanced. Control of tool positions via selector switch on the control panel. Tools: Machine equipped with operating tools, but without Editing tools. SPINDLE 1 Synchronous spindle Number of tools: 1 Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 120 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10 mm Motor strength: 4 KW (5.5 KW) SPINDLE 2 Number of tools: 4 Spindle stroke vertical: 3 x 80 mm = 4 tools Can be switched to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50mm/35mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Tool diameter max. For zero diameter 112 mm: 210 mm For zero diameter 140 mm: 232 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10/5 mm Motor strength: Spindle: 11 KW Feed: 1.1 KW Feed profiling unit: continuously 6-12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Special equipment: 3 Mechanical spindle brake for synchronous spindle, profiling spindle and Additional aggregates SPINDLE 3 1 fitting milling unit, right: for milling the fitting groove in the Milling pass or for groovi...

Condition: ready for operation (used), AEG / AVITEQ Vibrating tube (only 2 left ) 1 x : length 3000 mm – diameter 500 mm Iiedpotznitsfx Ag Njh with two pieces vibration motors of each 1,3 kW 1 x : length 5900 mm – diameter 500 mm with two vibration motors of 2.3 kW each

Condition: ready for operation (used), Vibrating Chute Haver Böcker Brand: Haver Böcker Length 1750 mm – width 1250 mm with two pieces vibration motors of each 1,4 kW Iiodpfx Agjtznhio Neh Incl.: springs.

Condition: ready for operation (used), Vibrating Chute Jöst Dim: length 2000 mm – width 1100 mm, Ijdpfetznhvex Ag Njih Driving with two pieces vibration motors of each 1,2 kW

Condition: ready for operation (used), Screening machine Mogensen Brand: Mogensen Typ Sizer SH 1026 2 Decks With two pieces vibration motors of each 0,9 kW Iedpfxoi A A Ddo Ag Njih

Condition: ready for operation (used), Screening machine Mogensen Sizer Brand: Mogensen Type: 1044 Surface: 1000 mm – 4 Decks Driving: 2 pieces vibration motors of each 1,6 kW On stock: 1 pieces. Isdpfxji A A Dae Ag Njih

Condition: ready for operation (used), Vibrating chute AVITEQ Length 1200 mm – width 1200 mm Lined with synthetic Incl: control equipment Iijdpjnac Itefx Ag Neh In stock: 1 piece.

Condition: ready for operation (used), Vibrating Chute Hazemag 4000-1400 Brand: Hazemag Iiodpfenac Niox Ag Nsh Dim. Vibrating Chute: Length 4000 mm – width 1400 mm. Driving: 2 pieces vibration motors of each 5,6 kW. Incl.: springs.

Condition: ready for operation (used), Vibrating Chute Kleemann *Dim. vibrating chute: length 1500 mm – width 1300 mm. Driving: 2 pieces vibration motors of each 1,7 kW. On stock: 2 pieces. *Dim. vibrating chute: longest length 1900mm, shortest length 1100mm- width 800mm. Driving: 2 pieces vibration motors of each 1,7 kW. On stock: 1 piece. Iiedpfx Agonac Rys Neh

Condition: ready for operation (used), Vibrating Chute Stiletto Brand: Stiletto Iiedpfxenac Sas Ag Noh Dim: length 1900 mm – width 700 mm, Driving with Magnet vibrator Incl.: control equipment.

Condition: ready for operation (used), Dewatering screen Sotres with Cyclone Brand: Sotres Iodpfsthy Sbox Ag Noih Dim. screen surface: 2800 x 1100 mm Screen opening: 12 x 1 mm with two pieces vibration motors of each 2 kW Including springs. Dim. cyclone: 3500 mm Length , Diameter 1100 mm. including steel construction incl.: tank incl.: Warman pump with e-motor , type 8/6.

Condition: ready for operation (used), Vibrating Chute Jöst Type: FUF Length 4500 mm – width 1400 mm with two pieces vibration motors of each 9,5 kW Iisdpfxjtznigo Ag Njh

Condition: ready for operation (used), Böhringer Hopper with Vibrating Chute Brand: Böhringer Iijdpfx Astznbvog Nsh Dim. bunker: 4500 x 2200 x 1000 mm. (new) Vibrating Chute: Length 4000 mm – width 1100 mm. Drive: 2 pieces of vibration motors of 4 kW each.

Condition: ready for operation (used), Vibrating chute Aviteq Brand: Aviteq Iijdpfx Aenac Izog Neh Typ: OA 2490/900 ASS Length 2490 mm – width 900 mm Driving through Magnet vibrator Incl.: control equipment Springs

Condition: ready for operation (used), Vibrating Chute Jöst Type: FUF Length 3500 mm – width 1300 mm with two pieces vibration motors of each 2,2 kW Iedpfjtznh Nox Ag Noih

Condition: ready for operation (used), Vibrating Chute Dosiertechnik Brand: Dosiertechnik 2 pieces: Isdpfx Aonac I Neg Njih *Dim. Vibrating Chute: Length 4300 mm – width 400 mm. Driving: 2 pieces vibration motors of each 1,7 kW. *Dim. Vibrating Chute: Length 5000 mm – width 400 mm. Driving: 2 pieces vibration motors of each 1,6 kW.

Condition: ready for operation (used), Vibrating Chute GFA Brand: GFA Iiedjnac Nbjpfx Ag Nsh Length 2000 mm – width 1200 mm with two pieces vibration motors of each 2,3 kW Incl.: springs On Stock: 2 Pieces.

Condition: ready for operation (used), Vibrating Chute HONERT 3200-900 Brand: HONERT Type: Reversible (can turn left and right) Dim: length 3200 mm – width 900 mm Driving: 4 pieces vibration motors Incl.: steel construction and springs. Ijdpfx Aonac Nqeg Njih

Condition: ready for operation (used), Vibrating Chute Zippe/AEG Iodpfxsnac Sto Ag Neih 1x; Dim: length 4500 mm – width 400 mm, Driving with two pieces vibration motors of each 1,5 kW

Condition: ready for operation (used), Vibrating Chute Svedala Brand: Svedala Isdervdctspfx Ag Noih Dim.: Length 2200 mm – width 1200 mm with two pieces vibration motors of each 1,3 kW

Condition: ready for operation (used), Screening machine Mogensen Bar Sizer Type: SV 1526 Isdjuht D Ijpfx Ag Noih 2 decks Driving: 2 pieces vibration motors of each 2,7 kW.

Condition: ready for operation (used), Vibrating chute Jöst Ijdpfotznhpex Ag Noih Brand: Jöst Dim: length 1500 mm – width 800 mm Driving: two pieces vibration motors of each 1,2 kW. On stock: 2 pieces.