Used Walter Tool for sale (64)

Condition: excellent (used), Year of construction: 2008, operating hours: 8,948 h, functionality: fully functional, spindle speed (max.): 9,500 rpm, feed length X-axis: 470 mm, feed length Y-axis: 330 mm, feed length Z-axis: 660 mm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 4,500 kg, grinding length: 350 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, grinding spindle motor power: 11,500 W, input voltage: 400 V, year of last overhaul: 2026, CNC Tool grinding machine WALTER Helitronic Power TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: FANUC Series 31i-model A5 Software installed: Tool Studio 3 Number of axes: 5 Height of centers: 145 / 190 [mm] Stroke X axis: 470 [mm] Rapid traverse rate X axis: 15000 [mm/min] Stroke Y axis: 330 [mm] Rapid traverse rate Y axis: 15000 [mm/min] Stroke Z axis: 660 [mm] Rapid traverse rate Z axis: 15000 [mm/min] Stroke A axis: 360 [°] Stroke C axis: +/- 200 [°] Max. workpiece lenght : end face grinding: 280 [mm] Max. grinding lenght: 350 [mm] Max. grinding diameter: 320 [mm] Max. grinding wheel speed: 9500 [rpm] Grinding spindle motor power: 11.5 [kW] Max. diameter grinding wheel: 200 [mm] Number of hours under power: 8948 [h] Coolant pump pressure: 7 [bar] Collant pump flow rate: 120 [l/min] Lubrication tank capacity: 400 [l] Supply voltage: 400 [V] Total power required: 25 [kVA] Weight: 4500 [Kg] INCLUDED EQUIPMENT: x1 TOOLSTUDIO 3 software x1 direct-drive A axis (Hollow Shaft) x1 automatic tool clamping system x1 RENISHAW LP2 part probe x1 DSL Air Technology type AES-GAMMA 30 mist extractor x1 lubrication tank + paper filtration system x1 GRUNDFOS coolant pump x35 grinding wheel holders (equipped with CBN wheels) x22 ISO50 attachments x1 SCHUNK collet holder x22 collets x1 NIKKEN collet holder x13 NIKKEN collets x1 metal rack for grinding wheel holders and ISO50 attachments 1x ISO50 calibration mandrel intended for axis calibration 1x calibration disc intended for axis calibration Iiodpfx Apoy Sxrponeb x1 set of service wrenches Various technical manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Machine similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinding machines, lathes, machining centers, and milling machines.

Condition: used, Year of construction: 2003, measuring range X-axis 300 mm measuring range Y-axis 290 mm measuring range Z-axis 650 mm tool diameter SK 50 mm Number of revolutions 30 U/min max. workpiecediameter 300 mm max. workpiece length 500 mm max. workpiece weight 40 kg accuracy +/- 0,002 mm Working speed X/Y/Z: 80 mm/s dimensions of the machine ca. 2,5 x 2,0 x 2,5 m weight of the machine ca. 1,2 t total power requirement 1 kVA Tool-Presetter WALTER - Heli Toolcheck Ijdjw E Np Sepfx Apnoib

Condition: not inspected (used), functionality: unexamined, power: 2.5 kW (3.40 HP), overall weight: 1,000 kg, table length: 350 mm, table width: 200 mm, No reserve price – guaranteed sale to the highest bidder! Placement of a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Table dimensions: 350 mm x 200 mm MACHINE DETAILS Connection: 2.5 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,100 x 2,200 mm Machine weight: 1,000 kg EQUIPMENT Suitable workbench with various copper electrodes Two-axis digital display (Manufacturer: HEIDENHAIN) External reference: 30 Iijdpfey D T Ehex Apnjb

Condition: used, centre height / mm weight 110 kg Iisdpey Suqzsfx Apnsb diameter 400 mm

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, CNC Universal 5-Axis Tool-and Cutter Grinder Iisdpfx Asy Egl Dopnob CNC Control HMC 400 CNC X-axis movement 400 mm Y-axis movement 250 mm Z-axis movement 580 mm C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Centre height: 80 mm Spindle bore: 18 mm Spindle mount: MT 3 Iiodpfxsyv Dy Tj Apneb Swiveling range: +110 / -20° Weight: 33 kg

Condition: good (used), centre height 220 mm table diameter 220 mm 250mm - chuck - 3 jaws 80mm passage Can be used vertically and horizontally Iedpfx Apou Sbl Rsnoib Standing tip height 220mm

Condition: used, Year of construction: 2013, The original build year of this machine was 1998. It was overhauled at the end of 2013 by Walter and converted from HMC500 to Fanuc control. In 2014 it was returned to operation. Maintenance was carried out and the associated parts were replaced up until 2024. Protocols/logs are available. The spindle bearings were replaced with high-precision ball bearings 14 days ago. The spindle is now running with 0-1 µm accuracy and is very quiet. Suitable for regrinding and remanufacturing of wood and metal working tools of all kinds. Accessories: FANUC i15 Control Pallet loader cylindrical, Toolstudio Software Standard & Advanced Version 2.1 Toolstudio Software Drills Toolstudio Software Boost Toolstudio Calibration Probe Software package 1 (cylindrical mills) Software package 2 (tapered-spiral end mills) Software package 3 (drill bit and step drill) Software package 16 (warming-up program) Measuring probe Electrostatic mist extractor Oil collection tray Automatic fire extinguishing system Pneumatic workpiece clamping Machine light X – axis longitudinal movement: 350 mm Y-axis vertical movement: 200 mm X-axis cross movement: 470 mm C-axis rotary table swing range: + / - 200° Centre height (with / without over-table): 130 / 160 mm Workpiece holder: ISO 50 Max. Workpiece diameter: 100 mm Workpiece length: 270 mm Grinding spindle speed stepless variable: 0 – 9500 U / min Workpiece length face grinding: 150 mm Grinding wheel diameter: max. 150 mm Drive power grinding spindle: 9 kW Connected load: 400 V / 50 Hz / 25 kW Weight: approx. 3600 kg Ijdpfxeyrrhve Apnjib Dimensions W x D x H: 2869 x 2716 x 1933 mm colour: grey RAL 7035 / 7043.

Condition: used, table diameter 400 mm table load . t table height . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m Iodpfx Aeyqv Rfepnoib The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Panning machine, Coating pan machine,Pralines and Drages, Used Machine Iisdpjypvhzjfx Apnob Manufacturer: Walter Brucks Type: I Overall dimensions: 1200 x 1380 x 1800 mm Weight: 280 kg Electrical data: 400 V, 3 A Pan size: 1200 mm Ø x 650 mm Pan opening: 740 mm Ø Capacity / mixing: approx. 150 kg

Condition: new, Walter Technic Compressor Model: SKTG 5.5 PP Kombo Ijdpfx Aey Nlwtspnsib Dryer, Automatic condensate drain, Tank: 500 litres, Pressure: 10 bar, Capacity: 700 litres per minute, Weight: 505 kg.

Condition: good (used), Year of construction: 2011, Saws sliding table saw WALTER FWR 500/2 - Polish production - DTR, CE - year of production 2011 TECHNICAL PARAMETERS: - the minimum length of the material after formatting is 800 mm - the maximum length of the material after formatting 1600 mm - maximum material width 480 mm - maximum material thickness 145 mm - disc diameter 500 mm - feed smoothly adjustable 0-20 m / min Iodpfx Aoh Dwmlepnjib - main engine power 2 x 5.2 kW - 1.5 kW feed motor power Machine dimensions: 340x230x180 weight 2500 kg

Condition: good (used), Execution : . - Clamping surface D = 400 mm - Overall height 196 mm Iiedpfx Asy Hdnfjpneb - . - 3-jaw chuck TOS , D = 250 mm , very good condition .

Year of construction: 1963, condition: ready for operation (used), Max. forming force: 80t, connected load: 3.5kW, current type: 3 phases, frequency: 50Hz, operating voltage: 380V, control voltage: 24V, rated current of the machine: 10A, rated current of the supply fuse fast-blow: 25A, slow-blow: 15A, weight: 1.79t. With documentation, without accessories or spare parts. Regularly maintained, machine has a defect, the speed adjustment no longer functions fully. An on-site inspection is possible. Iedpfsy A Smbex Apnoib

Condition: new, amount 7 Packung Various indexable inserts from Walter, Iodox Sr Ahspfx Apnsib see photos, for sale as a complete package. *2 packs still in original packaging -> NEW

Condition: ready for operation (used), Table size: 130 x 265 mm Iedpfx Aeyv D Dropnjib Table height: 180 mm

Condition: ready for operation (used), Table diameter: 250 mm Iijdsyv D Ahepfx Apnsb Table height: 105 mm

Condition: good (used), Approx. 60 tool holders of this size. €40/each Sale only within EU member states! Isdpfx Aeyzdunspneib No private sales. Any warranty rights are excluded. We do not assume any liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: used, Approx. 80 tool holders of this size. €30 each Isdpfx Ajyzdn Ujpnjib Sale only within EU member states! No private sale Any warranty rights are excluded. We do not assume any liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with any safety and environmental protection requirements specified in accident prevention regulations.

Condition: new, Year of construction: 2023, Walter TD500 KBA prism machine for sale. It was only unpacked for the photo and has never been operated. Purchased for a new production line that was never realized. Lower motor 22kW, upper motor 18.5kW. Can be tested on site. Iiedpfsy Sw T Sjx Apnjb

Condition: refurbished (used), End mill, flute cutters, Corner milling cutter Make Walter type prototype P 31 23017-20 shank diameter 20 mm cutting diameter approx.19 mm cutting length 38 mm freshly ground and coated Material HSS Co Isdpoiuh E Iofx Apnoib

Condition: used, Year of construction: 1986, grinding length . mm grinding width . mm workpiece height . mm Table 870x130 mm total power requirement 2,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 2x1x2 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Ijdeytx Ifspfx Apneib We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1974, max. grinding diameter 265 mm Iiodpfx Apoytg U Heneb grinding length 500 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 8,100 h, functionality: fully functional, machine/vehicle number: 2066-5172, Equipment: documentation/manual, CNC Tool Grinder WALTER HELITRONIC ESSENTIAL – year of manufacture 2016 For sale: 5-axis CNC tool grinder from the renowned manufacturer Walter Maschinenbau GmbH. The machine is designed for precision machining of cutting tools such as end mills, drills, as well as special and multi-flute tools. The unit is fully operational, regularly serviced, and maintained in excellent technical condition. BASIC DATA Model: WALTER HELITRONIC ESSENTIAL Year of manufacture: 2016 Control system: FANUC Number of axes: 5 Operating hours: 8,100 h Power supply: 3 x 400 V AC, 50/60 Hz Connected load: 25 kVA TECHNICAL SPECIFICATIONS Travel distances: X = 330 mm Y = 213 mm Z = 475 mm Rapid traverse speeds X, Y, Z: 15 m/min A axis: 360° C axis: ±200° Spindle speed: 10,500 rpm Spindle motor power: 9 kW Spindle diameter: 70 mm Maximum grinding wheel diameter: 150 mm Maximum workpiece length (peripheral wheel grinding): 255 mm Maximum workpiece length (face wheel grinding): 185 mm Maximum grinding diameter (complete machining): 100 mm Minimum working pressure: 6 bar Air consumption: 8,000 l/h Coolant pump capacity: 80 l/min at 7 bar Coolant tank capacity: 350 l Machine weight: 3,300 kg Software: Tool Studio version 2.1 EQUIPMENT AND FEATURES Isdpoyz Dwcsfx Apnjib Automatic loading arm The machine is equipped with an automatic tool loading system. The arm picks up tools from the input tray, transfers them for machining, and then places finished tools onto the output tray. This enables fully automated, uninterrupted production without constant operator supervision. Capability for mounting two grinding wheels Simultaneous mounting of two grinding wheels increases operational flexibility, reduces changeover times, and makes it possible to perform more complex operations without frequent wheel exchanges. Cooling for electrical cabinet HAOSCH cooling unit included. Additional equipment Professional measuring device for end mills and drills, providing fast, precise, and repeatable measurements to facilitate tool setup before machining. TECHNICAL CONDITION The machine is in very good technical condition Operated in clean production environment Fully enclosed work area for safety and noise reduction Regularly serviced.

Condition: used, Motor-driven indexer and rotary table, also known as indexing table with 15° indexing lock. Manufacturer: WALTER, Type: TARM 125 Serial No.: 1156, Year of manufacture: approx. 1985 Indexing lock: 15° Flange mount: short taper DIN 55022 size 5, Ø 82 mm Internal diameter of chuck flange: Ø 44 mm Continuous internal diameter: Ø 40 mm Construction height to flange mount without taper: 163 mm Horizontal clamping surface: 260 x 215 mm Vertical clamping surface: 195 x 160 mm Center height vertical: 125 mm Ijdoyhq A Dopfx Apnjib Motor speed: 0 to 500 rpm Power supply: 380 Volt, 50 Hz - external control required (control unit not included) - can be used vertically and horizontally - usable as indexer or rotary transfer table - one direction of rotation continuous, the other direction with 15° indexing lock Space requirement L x W x H: 500 x 215 x 177 mm Weight: 42 kg Good condition