Used Water Chiller for sale (8,065)

Condition: used, BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance, open-circuit cooling tower from the S1500E series manufactured by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are priorities. Technology Patented BACross III fill media system, which allows for easy inspection of the fill to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance access: A large, inward-swinging access door and internal maintenance platforms allow technicians to conveniently perform inspections while standing inside the unit. Hygiene control: The design minimizes standing water and protects against sunlight through special air inlet elements, reducing algae growth. Flexibility: The single-sided air intake allows the cooling tower to be installed even in confined spaces or directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial cooling: Used in factories for process cooling. Bljdpfx Adeynkbmehjp HVAC: Used in large building complexes as part of a central chiller system. Refrigeration: Used as a condenser in commercial refrigeration systems. Cooling Capacity An open evaporative cooling tower does not have a fixed, single kW cooling capacity, as the actual performance depends entirely on the thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or HVAC standard conditions, the nominal cooling capacity of this model is in the range of approximately 1,200 kW to 2,100 kW. Why does the cooling capacity vary? Wet-bulb temperature (outside air): The cooler and drier the ambient air, the more water can evaporate, and the higher the cooling capacity. Water temperatures: The performance changes significantly depending on the warm water inlet temperature (e.g., 35 °C) and the cold water outlet temperature (e.g., 29 °C). Air volume flow: According to BAC's technical data, the S15E 1018-10 LE model actively moves 60.0 m³/s of air through three installed 11.0 kW fan motors. If this air volume is reduced by a frequency inverter (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This is the most important thermodynamic limit. It describes the difference between the desired cold water temperature and the physically determined wet-bulb temperature. The closer the cold water is cooled to the wet-bulb temperature (smaller approach), the less kW of power the tower can provide. Technical Data: Fan and Air Data - Air volume flow: 60.0 m³/s (generated in suction operation) - Fan motors: 3x 11.0 kW (axial fans) - Technology: Integrated belt drive - Water flow: 198 l/s Hydraulic Connections - Water inlet: 1x DN 250 (nominal size ND 250 mm) - Water outlet: 1x DN 300 (nominal size ND 300 mm) - Make-up water connection: 1x DN 40 (ND 40 mm) - Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm) Dimensions and Weights - Operating weight: 11,446 kg (including water fill up to overflow) - Shipping weight: 5,350 kg (empty weight) - Heaviest single part: 3,114 kg (for installation)

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: K 220808/309a, overall weight: 2,850 kg, total width: 125 mm, total length: 330 mm, total height: 225 mm, Bodpfxjz Db S Re Adholp

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: K 220808/309b, overall weight: 2,850 kg, total width: 125 mm, total length: 330 mm, total height: 125 mm, Bsdpfxjz Db Tus Adhelp

Condition: excellent (used), WEISS SWT 600/800 Spray and Splash Water Test System IPX3 IPX4 Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800 Machine Type: Spray and Splash Water Test System Operating Hours: approx. 755.9 h according to the display For sale is a used WEISS SWT 600/800 spray and splash water test system for reproducible testing of enclosures, electrical products, components, and assemblies against penetrating water. The test specimen is positioned on the rotating table in the stainless steel test chamber. A pivoting tube with several spray nozzles moves around the test specimen and subjects it to water from alternating directions. Water flow rate and test duration can be adjusted and monitored via the integrated control system. Technical Data: Test medium: Water Test system: Pivoting tube / Rotating table Ingress Protection (IP) tests: IPX3 / IPX4 according to DIN EN 60529 Pivoting angle: adjustable Pivoting speed: approx. 60°/s according to series documentation Test specimen table: rotatable / height-adjustable Operating modes: Manual / Automatic Bledpfx Adozzk Tbshop Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 0.6 kW Rated current: 6.0 A CE marking available Water connections: Water inlet: max. 6 bar Water outlet: without back pressure Adjustable water flow rate Flow meter Regulating valve Manometer Control / Equipment: Touch operating panel Program editor / adjustable test time Operating hours, status and alarm display Stainless steel test chamber Large transparent test chamber door Pivoting tube with spray nozzles Rotating table / Test specimen table Height-adjustable test specimen holder Water inlet and outlet Side-mounted control cabinet Siemens SITOP power supply Lenze drive component Expansion options: With appropriate additional equipment, further IP tests are possible with the SWT series, e.g., IPX1 / IPX2, IPX4K, IPX5 / IPX6 and IPX9K. The additional test equipment or high-pressure units required for this are not included in the scope of supply for this offer. Application areas: Spray and splash water testing IP protection testing Electronics and electrical components Automotive components Sensors and control units Enclosures and luminaires Quality assurance Development and testing laboratories Dimensions / Transport data: Test chamber (L × W × H): approx. 2,350 × 2,400 × 2,650 mm Without hinges / door locking: approx. 2,350 × 2,400 × 1,850 mm Weight of test chamber: approx. 650 kg Transport by forwarding agent Condition: Used Operating hours: approx. 755.9 h Optical condition according to the pictures. Scope of delivery: WEISS SWT 600/800 Spray and Splash Water Test System Pivoting tube spray device Rotating table / Test specimen table Touch control Side-mounted control cabinet Equipment according to the pictures Availability: by arrangement. Scope of delivery as shown. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2024, battery capacity: 240 Ah, battery voltage: 80 V, total length: 1,023 mm, total width: 710 mm, total height: 402 mm, overall weight: 750 kg, No. 10039 Forklift Battery / Traction Battery EnerSys Hawker Water Less 80V 4 PZM 240 Unused, year of construction 2024, in new condition According to our customer / the previous owner, the battery is fully functional and can be viewed on site Lead-acid traction battery Hawker Water Less system Cell design PzM With central water refilling system / hose system Installed in battery tray Suitable for industrial trucks / electric forklifts Nominal voltage 80 V Capacity 240 Ah (C5) Number of cells 40 pcs. Electrolyte volume 96 l Battery dimensions approx. 1023 x 710 x 402 mm LWH Transport dimensions approx. 1200 x 800 x 600 mm LWH Weight approx. 750 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Bsdoz Dvn Tjpfx Adhjlp Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Baltimore VXC 110 R Evaporating Condenser 474,0 Kw capacity, 4x fans, Ammonia / NH 3 / Freon, Air Flow in m³/h 37.440, Weight Shipping weight: 1800 kg Operating weight: 2240 kg Bljdpfxsz I S N Us Adhsp

Condition: good (used), Pumpex water pump, 300 m³/h, 7.5 kW Bedpfxez Skzaj Adhelp

Condition: excellent (used), For sale: an industrial centrifugal pump, KSB ETABLOC-GN 32-125.1/024.1, with a 0.25 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC-GN 32-125.1/024.1 • Design: GN • Pump number: 4-925-104322/2 • Flow rate: 6.0 m³/h • Head: 2.0 m Bodpfoz Snuvsx Adhslp • Pump speed: 960 rpm Motor specifications: • Motor number: 9870132-0090-0003 • Power: 0.25 kW / 0.34 HP • Power supply: three-phase • Voltage: 400/230 V • Frequency: 50 Hz • Speed: 890 rpm • Current: 0.85/1.49 A • cos φ: 0.73 • Protection class: IP54 • Insulation class: F • Duty cycle: S1 • Mounting method: IM B14

Condition: excellent (used), For sale: a used Speck-Pumpen centrifugal pump, type 50/125, equipped with a three-phase Bauknecht electric motor, 4.0 kW. Pump specifications: Manufacturer: Speck-Pumpen Type: 50/125 Part No.: 69807 Manufactured in: West Germany Motor specifications: Manufacturer: Bauknecht Type: RF 4/2-76 No.: 3230192-2 Power: 4.0 kW Bledpjz Snuzefx Adhop Voltage: 380 V Current: 8.1 A Rotational speed: 2900 rpm Frequency: 50 Hz cos φ: 0.89 Protection class: IP44 Insulation class: B The pump has been inspected and is fully functional, ready for use.

Condition: excellent (used), For sale: a used KSB ETABLOC-GN 32-125/222 industrial centrifugal pump with a 2.2 kW electric motor. The pump has been inspected and is in full working order. It is in used condition, with normal signs of wear and tear, as well as some localized surface corrosion on the flanges and housing. The photos provide a detailed view of its condition. Pump technical data: Manufacturer: KSB Model: ETABLOC-GN 32-125/222 Design: GN11 Identification number: 48861776 Number: 5-925-204037/1 Capacity: 4–30 m³/h Head: 25–18 m Rotational speed: 2900 rpm Approximate weight of the complete unit: 39.5 kg Motor data: Manufacturer: KSB Type: OU FA 90L2A-60 Power: 2.2 kW Power supply: three-phase Voltage: 220–240 / 380–420 V Frequency: 50 Hz Rotational speed: 2850 rpm Protection class: IP55 Insulation class: F Blsdpfx Adez Snvmjhsp cos φ: 0.89

Condition: new, For sale: a NEW, unused KSB ETABLOC-G 40-160/552.2 centrifugal pump with a 5.5 kW electric motor. The pump comes from warehouse stock. It is new and unused. The set includes the original KSB carton and operating manual. Pump technical data: Blsdpfxoz Sn Aae Adhsp Manufacturer: KSB Model: ETABLOC-G 40-160/552.2 Ident-No.: 48862664 Flow rate Q: 7.5–63 m³/h Head H: 35.8–24 m Pump speed: 2900 rpm Design: G11 Motor: Power: 5.5 kW Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Speed: 2880 rpm Protection class: IP55 Insulation class: F Condition: NEW / UNUSED – warehouse stock. The pump is in its original KSB packaging. The operating manual is included. The item for sale is exactly the one shown in the pictures.

Condition: excellent (used), For sale is a vertical, multi-stage KSB Movitec V 4/16 B centrifugal pump with a 3 kW electric motor. The pump is in good visual condition. The unit also bears a service marking from ROCK Elektromotoren Reparaturwerk, indicating a previous inspection/service. Pump technical specifications: Manufacturer: KSB Model: Movitec V 4/16 B ID: Flow rate Q: 4.0 m³/h Head H: 119.1 m Pump speed: 2920 rpm Connection: PN16 Hydraulics: PN40 Seal: SiC/Ca/EPDM Temperature range according to nameplate: up to +120°C Pump year of manufacture: 2012 Motor: Power: 3.0 kW 50 Hz: 2900 rpm Voltage: 400D / 690Y V Protection class: IP55 Bsdpfez Sn Agox Adholp Insulation class: F Operating mode: S1 Motor weight: 27 kg The item offered for sale is exactly the one shown in the pictures.

Condition: excellent (used), For sale: a KSB ETABLOC-GN 65-160/1102.21 centrifugal pump, equipped with an 11 kW electric motor. The pump is used and in working order. It is in good technical condition and shows normal signs of use and storage. The exact visual condition can be seen in the photos. Pump technical specifications: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 65-160/1102.21 Design: GN11 Ident-No.: 48861861 No.: 5-925-204038 / 1 Flow rate Q: 18–143 m³/h Head H: 35.5–22 m Rotational speed: 2900 rpm Motor technical specifications (50 Hz): Manufacturer: KSB Power: 11 kW Voltage: 380–660 / 420 V Current: 20.8–12.0 / 19.0 A Rotational speed: 2900 rpm cos φ: 0.92 Protection class: IP55 Blsdpfjz Sn R Rsx Adhep Insulation class: F Motor weight: approx. 79 kg Condition: Used, in working order. Normal signs of wear and tear resulting from previous use and the age of the equipment. Scope of sale: KSB ETABLOC-GN pump with electric motor – exactly as shown in the photos, in the presented condition and configuration.

Condition: excellent (used), For sale is a Pumpen Distel type 50/200 centrifugal pump equipped with an 11 kW electric motor from Antriebstechnik G. Bauknecht AG. The pump is used and in working order. Visually, it is in good used condition and has normal signs of use and storage. The actual condition and completeness are shown in the photos. Technical data of the pump: Manufacturer: Pumpen Distel Type: 50/200 Serial No.: 78756 Flow rate Q: 40 m³/h Pressure: 4.5 bar Rotational speed: 2900 rpm Power: 11 kW Connections: flanged Technical data of the electric motor: Manufacturer: Antriebstechnik G. Bauknecht AG Type: RF 11/2-75 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2930 rpm Bjdpfx Aez Sn Sbsdhelp cos φ: 0.88 Protection class: IP54 Insulation class: B Operating mode: S1 Mounting form: B3/B5 Condition: Used, in working order. Has normal signs of use and storage. Scope of sale: Complete centrifugal pump with an 11 kW electric motor – exactly as shown in the photos.

Condition: excellent (used), For sale is an industrial KSB ETABLOC-GN 50-200/1502.21 centrifugal pump, equipped with a 15 kW KSB electric motor. The pump is designed for industrial applications, technological installations, water circulation systems, and other suitable media. Pump technical data: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 50-200/1502.21 Identification number: 48861841 Flow rate Q: 12–100 m³/h Head H: 55–34.5 m Rotational speed: 2900 rpm Connections: flanged Motor data: Manufacturer: KSB Type: QUPA 160 M2B-6 Power: 15 kW / 50 Hz Voltage: 380–660–420 V Current: 27.8–16.1–25.2 A cos φ: 0.93 Protection class: IP55 Insulation class: F Blodpfez Sn Suex Adhop Motor weight: approx. 87 kg Condition: used, with normal signs of use and storage visible in the photos. A complete set consisting of the pump and electric motor is being sold, exactly as shown in the photos.

Condition: used, Year of construction: 2007, functionality: fully functional, cooling capacity: 1,012 kW (1,375.94 HP), Carrier Absotption Chiller working with Lithium Bromide Cooling capacity at 12/8C° = 1000KW (300 refr.tons) In good working condition Blsds Afc Ngjpfx Adhop

Condition: used, Year of construction: 1997, machine/vehicle number: M294, Used Filling Monoblock Metalnova for still and sparkling water 12000 bphThe Used Filling Monoblock Metalnova for still and sparkling water 12000 bph, model LG, offers a bottling solution designed to process still and sparkling water in 2-liter containers, with a production capacity of 12,000 bottles per hour. Manufactured in 1997, the machine is currently dismantled and in storage. It operates in a counterclockwise direction and supports both PET and glass containers, thereby ensuring flexibility for mixed-format bottling lines. Moreover, its design allows seamless integration into existing production environments.Monoblock Configuration and Bottle Rinsing ProcessThe monoblock begins with a rinsing unit equipped with 60 grippers, which has been engineered to clean containers thoroughly before filling. Notably, the system performs two treatment phases, which not only remove impurities but also prepare each container for the subsequent filling stage. As a result, the unit maintains consistent hygiene standards while sustaining high throughput. In addition, the rinsing module integrates directly into the Used Filling Monoblock Metalnova for still and sparkling water 12000 bph, thereby ensuring accurate container positioning for downstream operations.Isobaric Filling System with Traditional Valve TechnologyAt the core of the Used Filling Monoblock Metalnova for still and sparkling water 12000 bph lies an isobaric filler equipped with 60 valves. The system, in particular, uses traditional isobaric valves, which allow the machine to accurately manage both carbonated and non-carbonated liquids. Consequently, it maintains pressure stability throughout the entire filling process. In doing so, it minimizes foam generation and preserves CO₂ in sparkling beverages. Furthermore, this configuration makes the filler suitable for dual-function production lines that handle a wide range of water products with precision and efficiency.AROL Capper with Three-Roller Threading System for Plastic Screw CapsFollowing the filling phase, the AROL capping unit applies aluminum screw caps using a three-roller threading mechanism (“3 principles Alaska”). This component includes 10 heads, each engineered to ensure uniform closure at high speeds. More specifically, the “3 principles” system uses three threading rollers to apply consistent torque and secure sealing. Thus, the capper guarantees reliable performance across various formats and cap types. It is especially effective for high-volume operations. Additionally, it aligns perfectly with the performance characteristics of the Used Filling Monoblock Metalnova for still and sparkling water 12000 bph, maintaining closure accuracy and product integrity.Electronic Control and Spare Parts AvailabilityThe machine uses a Siemens PLC to control its various operational stages. This platform not only ensures system stability but also allows for easy diagnostics and interface integration. Besides that, built-in safety features ensure compliance with modern industry standards and operational security. What’s more, the Used Filling Monoblock Metalnova for still and sparkling water 12000 bph comes with a set of available spare parts, which greatly facilitates both routine maintenance and emergency repairs. Therefore, operators can reduce unplanned downtime and extend equipment life without the need for complex interventions. Bledpfj Adyx Aox Adhep

Year of construction: 2012, condition: used, This listing is for a Waters Acquity H-Class UPLC. The unit is in full working condition and is ready for immediate release. Unit includes: TUV Detector Column Manager Sample Manager Binary Solvent manager Software and computer can be provided at extra cost. Unlock the full potential of your laboratory with the Waters Acquity H-Class UPLC System, a cutting-edge high-performance liquid chromatography (HPLC) solution designed for unparalleled flexibility and efficiency. This advanced system is engineered to deliver exceptional chromatographic separations, making it the ideal choice for pharmaceutical, biotechnology, food and beverage, and environmental applications. Bledpjxv Duujfx Adhop Key Features: Quaternary Solvent Blending: Seamlessly combine up to four solvents to optimize method development and enhance analytical workflows. Flow-Through-Needle Injector: Effortlessly transfer existing HPLC methods to UPLC, significantly reducing method development time and boosting throughput. Empower and MassLynx Software: Benefit from advanced data processing capabilities, including peak picking and integration, ensuring precise analysis and reporting. UNIFI Scientific Information System: Streamline data management for metabolomics, proteomics, and glycomics, facilitating comprehensive analysis. Benefits: Experience improved laboratory productivity as you transition to UPLC/UHPLC technology, reducing analysis time while increasing efficiency. Achieve enhanced resolution and sensitivity, allowing for more accurate analysis of complex samples. Simplify method development with advanced tools and software, accelerating the discovery of new methodologies. Applications: Whether you are conducting pharmaceutical research, analysing food safety, or monitoring environmental pollutants, the Waters Acquity H-Class UPLC System delivers high sensitivity and resolution for all your analytical needs. Elevate your chromatography capabilities today and transform your laboratory's performance with this innovative system.

Condition: used, Year of construction: 2015, GWK Hermeticool Anlage (2015) - system designed to dissipate heat from industrial cooling circuits, and its performance depends on the water temperature and the outdoor temperature. Bedpsz Hlgqefx Adhslp This is a complete central cooling system comprising: • two 3,000-liter tanks • pumps • a Hermeticool cooling unit • approximately 10 fans • automatic control system • water treatment • dual water softening • biocide dosing • corrosion inhibitor dosing • filtration • an expansion vessel • piping and fittings • an electrical control cabinet

Condition: ready for operation (used), Rittal SK3330.009-GKG815 Recirculation Chiller Nominal cooling capacity: 15000 W - 3/400V 50 Hz 15000W - 3/460V 60 Hz Maximum power consumption: 7360 W - 3/400V 50 Hz 9960W - 3/460V 60 Hz Temperature range: +5 / +43 °C Refrigerant: RA134a-5.5 Kg Blsdoz Hmdwopfx Adhjp Tank volume: 75 l Weight: 143 kg Year of manufacture: 2014 You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2003, operating hours: 3,200 h, functionality: fully functional, fuel: diesel, Hammelmann HDP 232, 1000 bar, 110 liters, CAT engine, in very good condition! Blodpfxez E S Dmo Adhjp

Condition: refurbished (used), Year of construction: 2024, Refurbished, air-cooled refrigeration unit HAS 340, with a cooling capacity of 273.75 kW at 7/12°C and an ambient temperature of 35°C. Blsdpou Atw Hefx Adhjp Refrigerant: R454B, GWP 467, A2L gas. Tube bundle evaporator. Process temperatures up to -12°C. Compact design.

Year of construction: 2025, condition: new, Festo water separator, size 12, 8005550, MS12-LWS-G-U-V 2 pieces, new and in original packaging! Bsdpfx Adozqclzshjlp

Condition: good (used), For sale: stainless steel washer / water rinsing machine, previously used for processing green beans, with a working length of 4 meters, width 1.9 meters, and a height of approximately 3 meters. Bodpfx Aswzwzbodholp

Condition: new, functionality: fully functional, power: 375.1 kW (509.99 HP), axle configuration: 4x4, fuel: diesel, emission class: euro6, Year of construction: 2025, Equipment: additional headlights, airbag, trailer coupling, From our immediately available new vehicle inventory, we offer you: TLF 4000 / All-wheel drive on a rugged MAN TGS 18.510 all-wheel drive chassis Here comes our MAN mountain lion! With its 510 hp and the rugged, single-tire all-wheel drive chassis, challenging terrain is its domain. This makes it ideally suited for steep inclines, adverse weather conditions, and areas far from any road. Chassis: • MAN TGS 18.510 4x4 EURO 6 with 510 hp (375 kW) • Automatic transmission • Single tires for maximum off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 PA mountings in the crew compartment Body: • High-quality body construction in a frame design made of rust- and corrosion-free material • 4 flexible and spacious equipment compartments per vehicle side Bedjxl Ab Sjpfx Adhslp • Swivel walls for maximum storage space • Fold-out steps for each side equipment compartment • Individually customized stainless steel equipment storage according to your requirements • Walkable, non-slip vehicle roof Vehicle pump/fire extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump FPN 4000-10 • PUMP&ROLL capable • Output of more than 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, steplessly adjustable foam mixing system • Water tank 4,500 l with integrated foam tank 450 l • Additional heater in the pump room Firefighting equipment: • High-pressure quick attack system with 50 m of dimensionally stable hose • Remotely controlled foam/water monitor on the vehicle roof • Remotely controlled front monitor • Self-protection system with 4 extinguishing nozzles in front of the tires Safety and lighting • LED light bar on the vehicle roof / 2 LED front flashers • Additional blue light elements on the body • Pneumatic special signal system • Loudspeaker system 100 W with public address unit • Rear view camera • Comprehensive LED lighting in the crew compartment and all equipment compartments • LED ambient lighting on the body and additional spotlights • Pneumatic LED light mast with remote control • Hygiene board on request We would be happy to provide you with a detailed offer and show you the vehicle in detail at our location in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement is not an offer, but rather information. Subject to prior sale!