Used Water Cutting Machine for sale (87,454)

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Lasdpfx Ahsx Ndu Ds Ujk Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt Ledpfx Ahex Eb Abo Ujak - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement If you have any questions or comments, please let us know. Best regards, Leo Holland

Condition: ready for operation (used), Year of construction: 2011, table length 3050 mm table width 1525 mm burner heads 1 Control Mazatrol Preview M Number of working hours 31400 h laser capacity in Watt 4000 max. table load 915 kg max. size of workpiece LxWxH 3050 x 1545 x 25 mm sheet thickness - max. 25 mm height of material-table 375 mm table height over floor 900 mm rapid traverse x / y / z axis 24 / 24 / 25 m/min weight of the machine ca. 14,2 t dimensions of the machine ca. 8 x 2,9 x 2,6 m Well-maintained laser cutting system (CO2 gas laser) with travel distances x/y/ z = 3260 x 1545 x 430 mm, maximum working area: 1525 x 3050 mm, 3rd turning axis NC rotary table for mounting tubes (therefore Z-axis 430 mm), gantry loader with vacuum lifter for feeding new sheets and lifting unit for removing finished sheets, as well as control cabinet with operating elements, tapping unit with drill magazine, automatically retracting protective hood, Donaldson extraction system, cooling system, further technical data available upon request. The gantry loader uses a vacuum lifter to pick up the new sheets, automaticallypicks up the laser-cut sheet during transport, sets the new sheet down, and then moves it to the delivery table for the finished sheet, where it Ledpfxox H Tuuj Ah Uoak is placed – see video 2. The extraction system, cooling system, and transformer are mounted on the platform above the machine. Mazatrol Preview M control unit with color TFT, 64-bit CPU, 20 GB hard drive, EIA/ISO format programming.

Year of construction: 2015, condition: excellent (used), BYSTRONIC BYSPRINT Fiber laser cutting Fiber 3015 year 2015 Laedpfohk Ngyex Ah Ujk Power 4000w fiber Size : 3000x1500mm In excellent working order. Visible in production 3 laser modules changed in November 2021 Automated nozzles changer With BYTRANS loading system Machine available for sale from the 21/09/2022

Condition: refurbished (used), functionality: fully functional, Year of construction: 2020, operating hours: 10,000 h, control type: CNC control, degree of automation: semi-automatic, laser source manufacturer: MAX, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, table length: 4,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, nozzle changer, safety light barrier, Bodor S4020 machine from 2020, available for sale following cessation of operations. Ljdpfx Ahjx H Nqxj Usak

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system -Shaft diameter: 30 mm -Shaft length: 220 mm (260 mm with socket) -Total length: 405 mm -for: 16 mm nozzle diameter Lodpfx Ahofhxpxs Ueak -Weight: 1.3 kg

Condition: repair required (used), functionality: limited functionality, Year of construction: 2005, operating hours: 54,057 h, Finnpower L6-BL Machine valt uit na 3-4 uur werken. Heeft een controle/revisie nodig. Laedov R Dwiopfx Ah Usk Vermoedelijk verliesstroom op een kabel. Bouwjaar:         2005 Laserbron:     54.057 u Machine:      66.724 u Demontage, laden en lossen is ten laste van de koper.

Condition: excellent (used), functionality: fully functional, Very nice paper cutter for sale. Brand: Polar, type 58 EM. With 99 programs, hydraulic drive, chrome table. Complete with standard accessories. Of course, you are welcome to test this machine with us. We can arrange transport/packaging for you and load it into a truck or container. Ask for a price including transport (location: Netherlands). Regards, Henk Hoos. Lasdox H Sidopfx Ah Uek

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Equipment: documentation/manual, Laser Cutting Machine Trumpf TruLaser 3030 Lean Edition Lasercapacity 3200W Type L20 Year 2012 Net 400V/50Hz Power 73 kVA Control voltage 24V Fuse 3 x 125 A Air 7 -10bar Nitrogen connection 30 bar Laedpfx Ahox Drlqs Ujk Oxygen connection 20 bar Hours Beam on 7755 Hours Laser on 25263 Machine is in excellent condition and completely modified by Trumpf in 2023. Complete documentation is available

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 98 h, machine/vehicle number: 17000-23051522412, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, laser source manufacturer: Epilog, laser hours: 97 h, laser power: 60 W, table length: 1,003 mm, table height: 673 mm, working length: 610 mm, working width: 305 mm, workpiece weight (max.): 63 kg, type of cooling: air, overall weight: 63 kg, total length: 1,003 mm, total width: 673 mm, total height: 455 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Laser engraver in excellent condition, supplied with a professional extraction unit and professional compressor. The system is totally complete and fully functional, virtually like-new (97 hours of operation). Business closed due to bereavement. Dimensions & Capabilities Working area (X × Y × Z): 610 × 305 mm Machine dimensions (L × W × H): approx. 1003 × 673 × 455 mm (39.5 × 26.5 × 17.9 in) Weight: approx. 63 kg (138 lbs) Laser Options Available type: CO₂ (metal/ceramic tube, air-cooled, 10.6 µm) with 60 W of power Speed & Precision Ledpfow Hg Nfex Ah Ujak Max. speed: 120 IPS (≈3.05 m/s) with 5 G acceleration Resolution: adjustable from 75 to 1,200 dpi Software & Memory Software interface: Laser Dashboard™ and Epilog Job Manager™ Internal memory: up to 1 GB, allows for jobs of any file size Control Features & Mechanical Construction Operation modes: raster, vector, or optimized combined mode Motors: DC brushless servo motors with rotary encoders for precise positioning Guide structure: * X-axis: polished stainless steel bearings with Teflon coating * Belts: double-width Kevlar type B for high accuracy Camera & Display IRIS™ system: integrated overhead camera for visual job placement directly onto the laser table 7″ LED touchscreen on the machine for job selection and direct autofocus Connectivity & Power Supply Connections: USB, Ethernet and optional wireless (Wi-Fi), compatible with Windows 7/8/10/11 Electrical supply: auto-switching 100–240 V, single-phase 50/60 Hz; max amperage ≈13 A (or ≈6.5 A depending on region) Ventilation & Safety Extraction requirements: external venting or internal filtration unit, airflow of 350–400 CFM (≈595–680 m³/h), single 4″ (102 mm) exhaust *Safety standard: Class 2 laser product (≤1 mW, 600–700 nm)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: S2321M0007, laser power: 400 W, This TruLaser Cell 3000 is used to cut parts out of coil, in thin sheet-thicknesses. It has an automatic feed of the material in the lasercel. The machine is visible in production. Lodpfxex Hiy Hj Ah Ueak

Condition: good (used), Flame cutting machine, torch, oxy-fuel cutting machine Ledpsn D Uq Sofx Ah Usak -Shaft diameter: 28mm - Shaft length: 200mm - Rack length: 140 mm -Total length: 320mm -Socket diameter: 42 mm -Weight: 2kg

Condition: reconditioned (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 7923278, type of input current: three-phase, overall weight: 8,200 kg, total height: 2,130 mm, total length: 3,320 mm, total width: 2,440 mm, space requirement width: 2,440 mm, input current: 30 A, input frequency: 50 Hz, nominal power: 7.5 kW (10.20 HP), rotational speed (max.): 4,600 rpm, rotational speed (min.): 1,500 rpm, 72x102 cm die cutter for thin paper and light carton up to 600 gsm. Exceptionally stable and very silent fast cylinder press. Floor anchoring is not necessary. Lodox Hzm Sepfx Ah Ueak

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 22,500 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: Sinar series DC K 2.5kW Laser source, laser power: 2,500 W, pipe diameter (max.): 140 mm, pipe length (max.): 8,500 mm, table length: 8,500 mm, working length: 8,500 mm, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, workpiece weight (max.): 4,000 kg, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 10,000 kg, total length: 17,536 mm, total width: 4,604 mm, total height: 2,237 mm, Equipment: CE marking, 2006 BLM Adige LT712D Tube Laser Machine Manufacturer: BLM Adige Machine Model: LT712D Laser: Rofin Sinar series DC K 2.5kW Laser source. Year: 2006 Infeed: 8,500mm Outfeed: 4,500mm Condition: Very Good Hours: 22,500hrs Available February or March 2026 This 2006 BLM Adige LT712D is a high-performance CNC tube laser cutting system designed for precision processing of mild steel, stainless steel, and aluminium tube profiles. Known for its reliability and accuracy, the LT712D is one of the most capable mid-range tube laser platforms, delivering clean, repeatable cuts with full automation from loading to unloading. With only 22,500 operating hours, this machine is in very good condition and has been maintained to OEM standards. It offers exceptional value for fabrication companies, structural steel specialists, subcontractors and manufacturers looking for a high-precision tube laser with proven durability. ⭐ Key Machine Specifications Working Capacity & Tube Dimensions Minimum tube length: 3,200 mm Maximum tube length: 8,500 mm Round tube diameter: Ø12 – Ø140 mm Square tube: 12 – 120 mm side dimension Rectangular / flat-oval: up to 170 mm circumscribed circle, min. side 10 mm, max. side 140–150 mm Ljdox Ddagepfx Ah Usak Max bar weight: Linear: 15 kg/m Total (L=8500 loader): 130 kg Machine Dimensions & Weight System footprint (L=6500 version): 17,536 × 4,604 × 2,237 mm (complete system) 13,595 × 4,604 × 2,237 mm (machine body) Machine weight: approx.10000 daN (= 10 tonnes) Laser, CNC & Automation CNC Control: Siemens Sinumerik 840D Laser Source: Rofin DC-K Series Cutting Head: Autofocus head with capacitance sensor + collision protection Working Axes: X travel: 8,500 mm Y travel: 400 mm Z travel: 95 mm A-axis: spindle rotation A1-axis: steady rest rotation V-axis: Bar support on the machining line (90mm) W-axis: Unload piece support (85mm) X1-axis: steady rest travel (610 mm) Loader & Unloader Automatic bundle loader with alignment, measuring & singularisation system Scimitar-style tube transfer system for smooth transition to machining line CNC-controlled tube support system with 5 active support groups Intelligent cut-piece unloader with conveyor belt for short parts up to 300 mm Extraction & Cooling Systems Fume extraction: 2,000 m³/hr with high-efficiency filtration system Cooling: MTA TAE 121 chiller, 260-litre cooling circuit reserve Hydraulics: 25-litre tank, 25 L/min pump, 70 bar system pressure 🟢 Condition & Availability Year: 2006 Hours: 22,500 (very low for a tube laser) Condition: Very Good – well maintained, clean, fully operational Availability: February–March 2026 Includes: Full machine, loader, unloader, chiller, documentation supplied. Why the LT712D Is a Top Choice The BLM Adige LT series is widely regarded as the benchmark for tube laser systems. This LT712D stands out thanks to: ✔ Exceptional tube cutting accuracy ✔ Reliable automatic loading & unloading ✔ High-quality Rofin laser source ✔ Full CNC control of every movement ✔ Capability to handle a wide range of profiles ✔ Heavy-duty industrial build quality (10 tonnes of rigidity) For fabricators looking to increase productivity, quality, and automation, the LT712D is an ideal investment. Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, Year of construction: 2024, laser power: 8,000 W, table width: 1,500 mm, positioning speed: 18 m/min, overall weight: 19,000 kg, working range: 3,000 mm, Ealge eVision 1530 8KW IPG laser source Linear drives on all axes - X/Y/Z Automatic centering system of laser beam Central conveyor under cutting table Mechanical shuttle table (exchange time 9seconds) 2 years warranty Machine only for installation in Belgium, the Netherlands or Luxembourg Laodpjtvaw Nofx Ah Usk

Year of construction: 2007, condition: ready for operation (used), Control Unit Brand TRUMPF This TRUMPF Trulaser 7040 was manufactured in 2007. It features a working area of X=2500 mm and Y=12000 mm, equipped with 2 laser heads and dual 3.2 kW power. Ideal for large-scale CO2 laser cutting tasks. Contact us for more information. Application Types Cutting Ledpfjx D R Udex Ah Ujak

Condition: used, Philipp high-performance cross-cutting and ripping machine or double cross-cutting system for recutting untrimmed models. The system measures, cross-cuts, and trims models after a log band saw or similar. The exact scope of delivery of the mechanization is to be agreed upon. The system is still in operation and can be inspected. Disassembly must be completed approximately by the end of September 2025. Special price ex-site. Lsdpfx Ajw Nnwheh Uoak workpiece length: 1,500 – 5,000 mm workpiece width: 200 – 1,000 mm workpiece height: 45 – 160 mm

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor -Oxyfuel cutting system: Oxyfuel cutting machine -Feed rate: adjustable -Dimensions: 460/210/230 mm -Weight: 7.6 kg Lodpjfdb Uqofx Ah Uoak

Condition: excellent (used), Year of construction: 1982, wire diameter range: 1,5 - 7,0 mm cutting length: up to 1.000 mm Lasdex Igxvjpfx Ah Uek wire feeding speed: 29 - 90 mtr./min

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 6,000 W, warranty duration: 6 months, year of last overhaul: 2025, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, Upgrade Co2 Bystronic laser to Fiber 1.5kw-20kw LaserEVO GmbH ist spezialisiert auf die Umrüstung von Bystronic CO₂-Lasermaschinen auf moderne Faserlasertechnologie – für maximale Effizienz, minimale Betriebskosten und eine zukunftssichere, digital integrierte Lösung ohne Neukauf oder Schulungsaufwand. Laodper Igxlsfx Ah Uek

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, laser power: 8,000 W, year of last overhaul: 2024, Equipment: cooling unit, documentation/manual, safety light barrier, MicroStep demonstration system: Laser all-rounder MSF Pro 3001.15LtkBr Machine data Manufacturer: MicroStep Model: MSF Pro 3001.15LtkBr Year of manufacture: 2020 Technology: Laser, Drilling Condition: Demonstration machine; currently in operation Working area: 3,000 x 1,500 mm Location: Dorsten, Germany Technical equipment - Laser rotator for weld seam preparation with EX-TRABEAM laser cutting head Lodpfx Ahsra Dygs Ueak - High-power fiber laser source nLight® Corona™ with 8.0 kW cutting power (year of manufacture 2020) - Fully automatic turret drilling spindle for drill holes up to 15 mm in diameter and threads up to M16 - Automatic shuttle table - Automatic cleaning and calibration station - MicroStep iMSNC® machine control system - MicroStep CAM software: Asper Basic® + Asper Nesting® + Asper BevelCut® - TEKA AirCube filter system with 5.5 kW (new model available on request) - Linear guides, driven on both sides in X- and Y-axis - Max. Travel speeds up to 130,000 mm/min - Positioning accuracy ± 0.03 mm The system is available immediately. A viewing of the system is possible at any time by appointment and is expressly desired. Changes and errors excepted.

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand TRUMPF This TRUMPF TruLaser 8000 was manufactured in 2012. A CO2 laser cutting machine featuring dual 3.6 kW power and a large working area of 2500x8000 mm. Consider the opportunity to buy this TRUMPF TruLaser 8000 CO2 laser cutting machine. Contact us for more information. Application Types Laedpfx Ahex D Eghj Usk Cutting

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor -Oxyfuel cutting system: Oxyfuel cutting machine -Feed rate: adjustable Ledsw H Aczjpfx Ah Uoak -Dimensions: 500/710/H340 mm -Weight: 23 kg

Year of construction: 1986, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor Lajdpfx Aefc R Dwjh Uok -Oxyfuel cutting system: Oxyfuel cutting machine Features: On/Off switch, without controls or potentiometer -Motor: 180 V/30 W -Dimensions: 580/370/H280 mm -Weight: 17.5 kg

Condition: good (used), Plasma cutting machine, plasma cutter, for plasma cutting system -Manufacturer: Hypertherm -Type: HySpeed HT2000LHF -Equipment: with hose package and cutting nozzle head Ledpewd Tg Sjfx Ah Ujak -Max. cutting current: 200 A -Dimensions: 1100/720/H1040 mm -Weight: 459 kg