Used Water Pump Column Pump 27 M H 30 Kw for sale (92,740)

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1.63 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, 4 Aerzen VM 30 screw compressors Knjdpsrkpp Hefx Ah Uof Were used to pneumatically unload railroad cars. Manufacturer: Aerzen Type: VM 30 Volume flow: 27.17m³/h (1630.2 m³/min) Pressure increase: 2.75 bar Compressor speed: 12874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C The compressed air is cooled with water via shell and tube heat exchangers. Year of construction: 1998 Dimensions: Length: 2800mm Width: 1150mm Height: 1770mm Weight: approx. 2750kg Operating hours: Compressor 1: 28109 hours Compressor 2: 28222 hours Compressor 4: 28973 hours Compressor 5: 26645 hours Regular service was carried out by a specialist service company! Have not been operated since 2019. Have been in a dry and heated location since then.

Condition: excellent (used), FLUTEC hydraulic ring hydraulic unit pump type: Flutec PT-300/2.0 23cm3/min max 350bar axial piston pump: Parker PV032R Year of construction approx. 1998 Nominal working pressure: max 350 bar three-part system. Flow rate: approx. Tank capacity: 150 liters Motor power: 5.5 kW Mains connection: 380 volts, 50 Hz Electric hydraulic valve SEF 5-25 65lit/min Space requirement Length: 800 mm, width: 650 mm, height: 1000 mm Kedsk Nmlyspfx Ah Uenf Own weight: approx. 300 kg

Condition: used, Three-phase motor, electric motor Kedsdzzilopfx Ah Usnf -Power: 0.85 kW -Speed: 2800 rpm -Shaft: Ø 14 x 27 mm -Construction: B14 -Dimensions: 245/175/H140 mm -Weight: 5.8 kg

Condition: good (used), functionality: fully functional, rotational speed (min.): 2,840 rpm, volume flow: 3,240 m³/h, pressing: 10,000 Pa, power: 18 kW (24.47 HP), High pressure centrifugal fan, dust extraction fan, pressure fan, vacuum fan, centrifugal fan, high pressure fan Spellna VRU 15-125-30H3 Condition: used impeller: forward curved steel, direct drive. 700mm Drive motor:18 kW p1:1,2kg/m3 pressure:9500-12000Pa Number of revolutions:2950rpm air transport:3240m3/h Volume output:0.9m³/s Kodpfx Asticdloh Ujnf Print pt:100 mbar Connection input:Ø 300 mm Connection output:Ø 200mm Dimensions: 1400x1400x960mm Mass: 350

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, total length: 4,500 mm, total width: 2,230 mm, total height: 3,000 mm, volume flow: 9,250 m³/h, power: 250 kW (339.91 HP), input frequency: 50 Hz, 1 rotary lobe blower Manufacturer: Kemostal (Tuthill M-D Pneumatics) Type: KPAB 1230 PD-Plus Flow rate: 9250 m³/hour (154 m³/minute) Differential pressure: 500 mbar Maximum process pressure: 1000 mbar Unit outlet line: Ø 406.4 mm Electric motor: ABB Type: M2CA 355MA 4 B3 Power: 250 kW Speed: 1487 rpm Voltage: 400/690 volts Soundproof booth: with 4 doors Knedpfx Ahev T Tr Io Uef Length: 4500 mm Width: 2350 mm Height: 3000 mm

Condition: good (used), Year of construction: 2021, functionality: fully functional, cooling capacity: 476 kW (647.18 HP), type of cooling: water, overall weight: 2,423 kg, total width: 930 mm, total length: 2,730 mm, total height: 1,700 mm, warranty duration: 6 months, Watercooled chiller CARRIER 30XW 0452B0006 476 kW Knsdpfx Ahsw U Rp Rs Uef Cooling capacity: 476 kW / 135.35 tons (12/7 - 30/35°C) Year of manufacture: 2021 Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. Carlyle 06TUW483ST3D.A42 (screw) Type of refrigerant: R134a Dimensions: 2.73x0.93x1.7 m. Weight: 2423 kg. Working hours: 4956 h. Condition: Good

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 96.7 kW (131.48 HP), type of cooling: water, overall weight: 840 kg, total width: 1,000 mm, total length: 2,200 mm, total height: 1,950 mm, warranty duration: 6 months, Watercooled chiller Climaveneta NX-W 0302 96.7 kW Cooling capacity: 96.7 kW / 27,5 tons (12/7 — 35°C) Year of manufacture: 2018 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Compressors: 2 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410a Hydraulic module: 4 pcs. water pump Lowara SM90RB14S2/315 E3 Dimensions: 2.2x1x1.95 m. Weight: 840 kg. Working hours: 0/0 h. Condition: New Knedpfx Aov Rprfeh Ujf

Condition: used, mileage: 140,728 km, power: 96 kW (130.52 HP), first registration: 01/2020, fuel type: diesel, fuel: diesel, CO₂ emissions: 212 g/km, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, loading space length: 4,130 mm, loading space width: 2,110 mm, loading space height: 1,940 mm, Year of construction: 2020, Equipment: Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power assisted steering, power mirror, = Additional Options and Equipment = - Front electric windows - Euro 6 - Driver airbag - Remote central locking - Height-adjustable driver’s seat - Height-adjustable steering wheel - Height-adjustable front seats - Centre armrest - Multifunction steering wheel - Radio/CD player - Reversing camera - Immobiliser - Bluetooth-enabled telephone = Further Information = Knsdpfsx H Rmnex Ah Uof General Information Number of doors: 2 Model year: 2025 Cab: single Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Weights Kerb weight: 2,483 kg Payload: 1,017 kg Gross vehicle weight (GVW): 3,500 kg Interior Interior: black Consumption Average fuel consumption: 8.2 l/100km Service, History and Condition APK (roadworthiness test): valid until 01/2026 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen, Wasaweg 22, 9723JD GRONINGEN, NL

Condition: used, Year of construction: 2005, total height: 1,200 mm, total length: 8,120 mm, total width: 850 mm, Weight: 1.240 kg - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 535 - Main motor power [kW]: 6.0 - Min. saw blade diameter[mm]: 500 - Max. saw blade diameter [mm]: 550 - Options: Automatic pusher system - Voltage [V]: 400 - Power [kW]: 6.0 - Transport dimensions: 8120mm x 850mm x 1200mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Knsdpfxsx A S Ups Ah Usf Yorick Diebels

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Knjdpfedzc Rxox Ah Ujf Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Year of construction: 2019, condition: like new (used), Dry air system M + H SOMOS (art.2200) M + H Somos dry air dryer RDT 250, NEW CONDITION Bj. 2019 Price: € 12.500 Kjdpogl A Snsfx Ah Uenf Contact : Mr. Rainer Eckerle

Condition: new, TECHNICAL DATA: - Base area: 5,000 x 6,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Upper edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard, grade P6, raw/white - Load capacity: 500 kg - Colour: RAL of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights are available upon request. Our team will be happy to provide advice! Scope of delivery: - Supports - Primary and secondary beams - Cross bracing - Flooring - Fastening materials PRICES: Version I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €4,499.65 net, plus shipping costs and VAT. Version II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €7,393.50 net, plus shipping costs and VAT. Version III: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €7,303.60 net, plus shipping costs and VAT. Version IV: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €10,513.84 net, plus shipping costs and VAT. Version V: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €13,707.36 net, plus shipping costs and VAT. Version VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €19,027.30 net, plus shipping costs and VAT. Version VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €25,003.69 net, plus shipping costs and VAT. Further variants available Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station Kedpfxjxmkqde Ah Uonf - Impact protection YOUR CONTACT PARTNERS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL PLANNING & CUSTOM MANUFACTURING This platform system is an example from our standard range. Of course, we can design and manufacture your warehouse platform precisely to your operational requirements – tailored to area, load capacity, installation height, and intended application. Our design department will prepare an individual, non-binding quotation based on your specifications. Whether for new construction, extension, or modernization of existing systems – we support you with expert knowledge and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional cost. The additional costs depend on the delivery location and scope of shipment and can be requested from us individually. PAYMENT TERMS Payment terms will be agreed upon in case of order. The price is per unit/net price as stated in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, storage platforms, textile warehouses, as well as machines for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at favorable conditions. If you have any questions, please feel free to contact us. ✅ Four Winning Factors – The Four Success Components of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, Year of construction: 2007, total height: 1,750 mm, total length: 1,000 mm, total width: 1,810 mm, Weight: 1.240 kg - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 100658 - Main motor power [kW]: 7.5 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Power [kW]: 8.0 - Transport dimensions: 1000mm x 1810mm x 1750mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 4 Financial information Ksdpswniuajfx Ah Usnf VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) 4m maximum panel height Optional side and end stops for floor cassette assembly Knjdpfx Ahedzc Rfs Uof

Condition: new, TECHNICAL DATA: - Footprint: 5,000 x 6,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: Chipboard 38 mm, grade P6, raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the specified grid as standard. Other sizes and heights are available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: Variant I: Floor area: 30 m² | Dimensions: 5,000 x 6,000 mm | €3,598.65 net, plus transport costs and VAT. Variant II: Floor area: 60 m² | Dimensions: 5,000 x 12,000 mm | €6,418.50 net, plus transport costs and VAT. Variant III: Floor area: 60 m² | Dimensions: 10,000 x 6,000 mm | €6,423.45 net, plus transport costs and VAT. Variant IV: Floor area: 90 m² | Dimensions: 5,000 x 18,000 mm | €9,104.40 net, plus transport costs and VAT. Variant V: Floor area: 120 m² | Dimensions: 5,000 x 24,000 mm | €11,890.80 net, plus transport costs and VAT. Variant VI: Floor area: 180 m² | Dimensions: 10,000 x 18,000 mm | €16,281.60 net, plus transport costs and VAT. Variant VII: Floor area: 240 m² | Dimensions: 10,000 x 24,000 mm | €21,471.36 net, plus transport costs and VAT. Further variants available Optional accessories: - Guard rails - Flush wall connection Ksdsxmklbjpfx Ah Uenf - Staircase - Transfer station - Impact protection YOUR CONTACT PARTNERS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your storage platform precisely according to your operational requirements – tailored to surface area, load-bearing capacity, installation height and the intended application. Our planning department will prepare an individual, non-binding quotation based on your specifications. Whether new construction, extension or modernization of existing systems – we support you with sound expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or dispatch can be arranged at an additional cost. Extra charges depend on the place of delivery and the scope of the shipment and can be quoted individually upon request. TERMS OF PAYMENT Terms of payment are to be agreed upon in the event of an order. The price is quoted per unit/net, or as stated in the description (plus VAT). Naturally, you will receive an invoice showing the applicable VAT. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, materials handling systems, storage platforms, textile storage, as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four to win – The DLK formula for success – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, HM-ZN 8500 undercutting saw Serial number: 277 Connection Voltage: 400V- 6,6KW Weight: 1400 KG Saw blade max: 700mm Saw blade min: 600mm Bore: 30mm Saw blade tiltable Length automatic feed: 9500 mm Length output conveyor: 4300 mm Total dimensions: 15000x1500x1800 mm (LxWxH) - Documentation available: No Knjdpfswnhz Sjx Ah Uef - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, A simple range of scissor type lifts for attaching to a crane hoist for the lifting of panels using (customer supplied) crane. 1 tonne capacity Knjdpfxofqmtks Ah Ujf Minimum wall panel height 2000mm Maximum wall panel height 3500mm One man operation Weight of unit 80kgs

Condition: new, TECHNICAL DATA: - Base area: 5,000 x 6,000 mm [other configurations available] - Grid: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard P6 raw/white - Load capacity: 250 kg - Color: RAL color of your choice - Condition: new The mezzanine platforms can be expanded in the specified grid as standard. Other sizes and heights available on request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Floor covering - Fastening materials PRICES: Version I: Base area: 30 m² | Area: 5,000 x 6,000 mm | €3,400.00 net, plus shipping costs and VAT. Version II: Base area: 60 m² | Area: 5,000 x 12,000 mm | €6,008.00 net, plus shipping costs and VAT. Version III: Base area: 60 m² | Area: 10,000 x 6,000 mm | €6,043.20 net, plus shipping costs and VAT. Version IV: Base area: 90 m² | Area: 5,000 x 18,000 mm | €8,512.54 net, plus shipping costs and VAT. Knodsxmkk Ropfx Ah Usf Version V: Base area: 120 m² | Area: 5,000 x 24,000 mm | €11,154.85 net, plus shipping costs and VAT. Version VI: Base area: 180 m² | Area: 10,000 x 18,000 mm | €15,343.02 net, plus shipping costs and VAT. Version VII: Base area: 240 m² | Area: 10,000 x 24,000 mm | €20,081.60 net, plus shipping costs and VAT. Further configurations available Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOMIZED DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we also design and manufacture your storage platform precisely to your operational requirements—tailored to the area, load capacity, overall height, and intended application. Based on your specifications, our planning department will prepare a customized, non-binding offer. Whether new construction, extension, or modernization of existing systems—we support you with extensive expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of your goods. This item is available for collection. Delivery or shipping is possible at additional cost. Extra charges depend on the delivery location and the size of the shipment and can be requested from us individually. PAYMENT TERMS Payment terms to be arranged in case of order. The price is per unit/net price as stated in the description (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US The company DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please contact us if you have any questions. ✅ Four times the success – The cornerstones of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Condition: used, Year of construction: 2002, - Year: 2002 Ksdpfswnh T Isx Ah Uonf - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame. Kodpfx Ajb Tmrvsh Ujnf

Condition: used, Year of construction: 2001, Undercut cross-cut saw HM-D 6500-R Serial number: 319 Knodpfx Ajwng Sieh Uof Connection Voltage: 400V- 11KW Weight: 2450 KG Saw blade max: 550 mm Saw blade min: 500mm Bore: 30mm Length automatic feed: unknown Available from August 2024 - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 319 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Heavy duty splicing press for producing long lengths of timber Simple to use Top and bottom plates press simultaneously Very quick cycle time 35 tonne capacity hydraulic pack 7.5Kw motor Pneumatically operated head Maximum timber section 75 x 300mm Two hand control unit Manual eccentric side clamping Optional 2m infeed and outfeed tables Knjdpfjpahmhsx Ah Ujf

Condition: used, Year of construction: 2002, total height: 1,900 mm, total length: 1,800 mm, total width: 1,800 mm, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 388 - Main motor power [kW]: 6.0 - Max. saw length [mm]: 9500 - Max. saw width [mm]: 300 - Max. saw blade diameter [mm]: 550 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 9000 - Output table length [mm]: 3650 - Voltage [V]: 400 - Power [kW]: 6.0 - Transport dimensions: 1800mm x 1800mm x 1900mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Kedpfoxzgrgsx Ah Ujnf Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, A self assembly heavy duty modular timber frame table suitable for framing and boarding of panels. The modular 2m or 3m x 1m tables can be assembled in various configurations, to suit either wall panels or floor cassettes. 4 off 2m / 3m x 1m Modular tables suitable for frames up to 4m / 6m x 2.8m PLY top with channel for fitting (optional) pop up rollers Kodsn Up R Ijpfx Ah Usnf Complete with: 1 fixed infill for spacing the table to 2.8m capacity 1 sliding infill for supporting subcomponents inside the panel. 9m of fixed fence (6m length x 3m width) Working Height 700 - 850mm

Condition: used, total height: 1,550 mm, total length: 1,400 mm, total width: 1,100 mm, Weight: 1.500 kg - Documentation available: No - CE certificate present: No - Max. saw length [mm]: 6000 - Max. saw height [mm]: 230 - Input table length [mm]: 6000 - Options: Automatic pusher system - Transport dimensions: 1400mm x 1100mm x 1550mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ksdpfxsxixh As Ah Uenf Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels