Used Weeke Optimat for sale (76)

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 400 mm, spindle motor power: 10,000 W, spindle speed (max.): 24,000 rpm, number of axes: 3, This 3-axis HOMAG WEEKE BHP200/VANTAGE714 CNC Machining Centre was manufactured in 2013. It features an impressive working area with an X-axis of approximately 4300 mm and a Y-axis of around 2250 mm. The machine is equipped with a powerful 10 kW spindle capable of reaching up to 24,000 RPM and includes a 14-position automatic tool changer. If you are looking to get high-quality CNC routing capabilities, consider the HOMAG WEEKE BHP200/VANTAGE714 machine we have for sale. Contact us for further details. • Series: Weeke Vantage 200 platformElectrical specs (from plate) • Supply: 415Y / 240 V • Phases: 3-phase • Frequency: 50 Hz • Full load current: 61 A • Recommended fuse: 80 A • Control voltage: 24 VSpindle • Tool interface: usually HSK-F63 • Tool change: automaticAxes • Servo-driven gantry systemTool changer • 14-positionDrilling block • Vertical drills • Horizontal drills • Grooving sawTable type • Flat nesting vacuum table Itedpfezatdbex Ag Ush • MATRIX table variants • Zoned vacuum system • Automatic vacuum controlController / software (usually paired with) • HOMAG Power Control / Homatic 2000 IPC • WoodWOP software • MCC production software

Condition: good (used), Year of construction: 1998, functionality: fully functional, Weeke through-feed drilling machine BST 500, with drilling heads on the right and left sides, 5 units underneath, none above. Itjdpfjzb El Hox Ag Ueh 5 drilling machines in stock, sold individually.

Condition: good (used), Year of construction: 1997, functionality: fully functional, input current: 50 A, number of axes: 3, number of slots in tool magazine: 12, total length: 5,000 mm, total width: 2,900 mm, overall weight: 4,500 kg, Equipment: CE marking, documentation/manual, CNC milling machine with a tool magazine for 12 tools, featuring a vacuum clamping system to secure the workpiece, and includes a vacuum pump. Itodeza U Nxspfx Ag Ujh

Condition: used, machine/vehicle number: 008469, X axis working area: 3050 mm Y axis working area: 850 mm Ijdpfjywafuox Ag Usth Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: used, machine/vehicle number: 008166, X axis working area: 4250 mm Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 25 Total number of tool changer positions: 14 Itjdpfx Aeyy U S Isg Ueh

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Ijdpfx Aokw H Ekeg Usth Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 machining dimension X: 2.500 mm machining dimension Y: 1.300 mm Ijdpfx Ash E Sghjg Usth Machining dimension Z: 4 - 80 mm Number of milling units. 2 Number of drilling units: 2 Drilling spindles vertical: 72 drilling spindles horizontal X: 16 drilling spindles horizontal Y: 4 grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Speed: 18.000 rpm Disassembled - directly available

Condition: used, machine/vehicle number: 008557, X axis working area: 3050 mm Y axis working area: 850 mm Itjdpfx Aezcbhgeg Uoh Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 19

Condition: good (used), Year of construction: 2008, functionality: fully functional, We offer for sale: WEEKE (Homag Drilling Systems) – OPTIMAT BHC 200 – High-Precision CNC Machining Center Technical data: • Year of manufacture: 2008 GUIDE SYSTEM AND DRIVE TECHNOLOGY • Dust-protected linear guide system • Rack-and-pinion drive in X-axis; ball screw drive in Y- and Z-axes • Axis travel: - Y = 1822 mm - Z1 = 300 mm - Z2 = 185 mm • Worktable: - X = 5250 mm (length) - Y = 1250 mm (width) Iedpfxewx Iide Ag Ujth - Z = 100 mm (thickness) (Optimat BHC200) • Control system: HOMAG PowerControl/woodWOP • Equipment: o Automatic tool changer o Multi-spindle drilling head o Integrated vacuum table for secure clamping o Suitable for machining wood, plastics, and light metals • Condition: Good; very well maintained, serviced regularly / last service 03/25 • 10/2022 – Machine upgrades: - New industrial PC (Siemens Industrial PC) - woodWOP 8 / Windows 10 update Advantages of the HOMAG BHC200: • Precise and efficient machining of a wide range of materials • Ideal for joineries, furniture manufacturers, and custom productions • Reliable performance even for demanding projects Scope of delivery: • Machine + industrial PC • Operating manual • CE SAFETY AND PROTECTION DEVICES - Side and rear safety fencing - Three-segment safety tread mat in the front area allows loading of workpieces in the non-active working zone Inspection and test run on site are welcome! Dismantling and transportation are to be arranged by the buyer.

Condition: used, machine/vehicle number: 008406, Max. panel width: 1000 mm Isdpfx Ajyl Ihxsg Ueth Max. panel length: 2500 mm No of injectors: 12

Condition: used, machine/vehicle number: 008205, X axis working area: 4250 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Itodpfex A Th Rox Ag Uoh Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 008170, X axis working area: 4300 mm Y axis working area: 2250 mm Itodpfx Agex A Tcuo Uoh Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 12 Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 007734, X axis working area: 3050 mm Iedpfxjw Idb Hs Ag Uoth Y axis working area: 850 mm Main Electrospindle power: 5 KW Total number of drilling spindles: 19

Condition: not inspected (used), Year of construction: 1976, machine/vehicle number: 1299, Brand: Weeke Model: PE 75 Iedpfou Nwzcox Ag Uoth Year of manufacture: 1976 Motor: 7.5 kW, 50 Hz, 380V, 3-phase Stock number: 10316

Condition: used, machine/vehicle number: 005910, X axis working area: 2500 mm Y axis working area: 1300 mm Ijdpfxswuckhs Ag Ujth Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 84

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, rotational speed (max.): 2,970 rpm, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Max. panel width: 1,000 mm Max. panel length: 2,500 mm Min. panel length: 250 mm Min. panel width: 100 mm Number of vertical lower groups: 5 Number of vertical upper groups: 1 Lateral horizontal groups: yes Number of pressure elements: 5 Number of horizontal lateral groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS Isdpfx Agsyzy T Te Ueth System control: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW EQUIPMENT Lateral horizontal groups CNC positioning of the groups CNC positioning of the Z-axis Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial reference documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6157

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 0-250-18-0294, functionality: fully functional, travel distance X-axis: 3,900 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 370 mm, table length: 3,550 mm, table width: 1,355 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obliges timely collection by the end of calendar week 45! TECHNICAL DETAILS X-axis travel: 3,900 mm Y-axis travel: 1,350 mm Z-axis travel: 370 mm Number of milling spindles: 1 Table length: 3,550 mm Table width: 1,355 mm Z-axis working range: 100 mm MACHINE DETAILS Weight: 4,500 kg Power: 22.0 kW Itjdpfxsxgd Ezj Ag Uoh EQUIPMENT Drilling tool Documentation CE marking

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 0 - 250 - 04 - 0558, Technical data : X working area 2,500 mm Working area Y 800 mm Z working area 40 mm Number of milling spindles 2 Vertical drilling spindles 16 Drilling spindles in X axis 2 Drilling spindles in Y axis 1 Vacuum pump Machine table traverse table Weight approx. 3,500 kg CNC drilling and milling center WEEKE BP 10 , built in 1991. Panel area 5,200 x 1,500 mm. Machining area 2,500 x 800 mm, 16 vertical drilling stations, 1 keyway saw, 2 milling units, support plate handwheel and hydraulic unit. In 2016 he switched to Linux CNC 3D - new computer, new monitor, new software. Isderwmwfopfx Ag Uoth

Condition: used, machine/vehicle number: 006157, Max. panel width: 1000 mm Isdpfx Aoy Nkyasg Usth Max. panel length: 2500 mm No of Bottom Units: 5 No of Top Units: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 007716, X axis working area: 3250 mm Y axis working area: 1220 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Itodpfewuz N Nsx Ag Uoh Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 006228, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Itodpey Nkwrofx Ag Uoh Total number of drilling spindles: 7 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 005947, X axis working area: 2500 mm Y axis working area: 4300 mm Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of tool changer positions: 28 Isdpfxey Nkpuj Ag Ueth

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Y axis working area: 2245 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16 Ijdpfxeu N Skfo Ag Uoth Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 005289, X axis working area: 7400 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 11 KW Isdpfx Agswcyacs Ueth Number of controlled axes: 4 axes Total number of drilling spindles: 10 Total number of tool changer positions: 14

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Safety cabin (enclosure) of the working head No. 1 Workpieces fixing clamps (for the panels introduction in the working area Panels feeding by motorized chain/track Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 Ijdpfjyywcvex Ag Uoth No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions)