Used Welding Fumes for sale (5,578)

Condition: good (used), Year of construction: 2015, 1 used shielding gas welding machine Daihen /OTC M 380-S Year of manufacture 2015 Current range 30-380A Welding power at 100% duty cycle 270A Welding wire 0.8-1.6 mm Wire feed 0.1-22 m/min With 4-roller wire feeder with encoder control Hodpfxoxnqnxj Aacow

Condition: new, Design: Anti-glare cassette with colorfast filter and selectable protection levels from 4/9–13 Steplessly adjustable sensitivity range "super High" Opening delay adjustable via control knob Maximum ultraviolet/infrared protection across the entire protection level range Reflection-free cover lens and inner protective lens Energy-efficient electronics with super-sleep mode for approx. 3,000 hours without battery replacement Hedpjw Rntfefx Aacow

Year of construction: 2012, condition: ready for operation (used), A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible. Hodoxr Nwaopfx Aacow

Condition: good (used), Year of construction: 2018, Projection welding machine, spot welding machine Manufacturer: WMA Schmidt & Bittner Type: PMP 11/200 Year of manufacture: 2018 Hjdpfx Aet Hlphjacew Like new, almost no operating hours Rated power (at 50% duty cycle): 200 kVA Connected load: 396 kVA Connection cross-section: 180 mm² Max. welding current: 52.8 kA Throat depth: 350 mm Electrode stroke: 100 mm

Condition: used, Year of construction: 2008, table diameter 1100 mm Hedpfx Aasxpi Akocew table load 1,2 t swivelling range 0 - 135 Grad turning speeds 0,15 - 3,4 U/min table height adjustment von 780 bis 1560 mm max. torque on the faceplate 1300 Nm Dimensions (LxWxH) 2,8 x 1,6 x 1,6 m Welding turntable with new remote control • Self-locking gear system, no pre- or post-running under eccentric loads • Hydraulic height adjustment allows for virtually unlimited positioning • Frequency-controlled, infinitely variable speed of the rotary table

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: water, welding current (min.): 30 A, welding current (max.): 350 A, For sale: Miller MigMatix 380 DX 30-350 AMP 400 Volt Hodpfoxghx Sjx Aacew Synergic Water-cooled 2/4 Takt 30 Steps adjustable 4 Roller drive Burnbacktime adjustable Steel – Stainless Steel weldable Refurbished, serviced, and tested Including 3 meter Welding torch, earth work cable with clamp, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, table length 3000 mm Hsdpfx Aasgvkc Njcow table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The Professional 750 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, load capacity: 35 kg, empty load weight: 570 kg, Equipment: documentation/manual, Welding robot with control cabinet & welding unit! TECHNICAL DETAILS Maximum payload: 35 kg MACHINE DETAILS Own weight: 570 kg EQUIPMENT Hodpfoxnw E Rox Aacew Control cabinet Welding unit

Condition: new, Year of construction: 2025, load capacity: 15,000 kg, Column-type turning device with 15-ton load capacity, available as a set or individually. 2 sides are driven. Machine is offered as a synchronized set or individually. Protec turning device / positioner Syncrolift. Double-column design, wireless and manual hand remote control. Hsdpfew Nilaex Aacow Column adjustment: both columns electrically movable. Load capacity: 15,000 kg, 360° rotation. Torque: 21,000 Nm. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Rotation speed: 0.5 rpm. Clamping plate diameter: 1,000 mm. Rotational drive: 2 x 2.2 kW motors. The price refers to one unit with electric trolley included. The second unit as part of a set is 20% cheaper. Optional with articulated flange (cardan flange) upon request.

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate Hedpsgvkktjfx Aacsw - CE marking - Very good value for money

Condition: used, functionality: fully functional, load capacity: 2,250 kg, table load: 2,250 kg, Heinrichsglück welding positioner, load capacity 2250 kg. Speed and tilt are infinitely adjustable. Comes with several remote controls. Older technology but robust construction. Clamping plate diameter: 1.0 m. Height horizontal: 1.4 m. Height at center: 1.2 m. Base/frame: 0.42 m (can be removed for lowering). Length: 2.0 m. Width: 1.2 m. Hedoxd Ayxepfx Aacjw

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm Hodpfxjibw Sxe Aacew weight of the machine ca. 2,5 t - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: excellent (used), functionality: fully functional, load capacity: 2,000 kg, Mobile lifting turning device, 2-ton load capacity with remote control, in very good condition Machine weight 1150 kg 400 V / 50 Hz Torque 3000 N/m Hodpfjw R U Tlox Aacsw

Condition: new, table diameter 900 mm table load 1 t swivelling range 0-135 Grad excentricity 200 mm table turning speeds 0,12 - 1,2 U/min Torque 2000 N/m Hjdpfxjgvkikj Aacew total power requirement 0,75 kW dimensions of the machine ca. 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, functionality: fully functional, load capacity: 10,000 kg, pivoting range: 360 °, Column lift turning device, 10-ton load capacity, available as a set or individually 2 sides driven Machine offered as synchronized set or individually Protec turning device / positioner Syncrolift Hjdsxq S Rgspfx Aacow Double column, handheld remote control wireless and manual Column adjustment 2x electrically movable Load capacity 10,000 kg, 360° Minimum working height: 800 mm Maximum working height: 1,700 mm Speed 0.5 rpm Clamping plate diameter 900 mm Rotary drive 2 x 2.2 kW Torque 18,950 Nm The machine is also offered individually as mono model (more affordable) Available on request with articulated flange (cardan flange)

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t The table Professional 750 Article no. 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Hodpfxsgvkfvo Aacew Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, Year of construction: 2025, load capacity: 1,200 kg, 1200 kg Load Capacity Welding Positioner, CE Certificate Hsdpfx Ajxq S Nieacow Load capacity horizontal: 1200 kg Load capacity tilted: 1200 kg with a load center at 250 mm Very robust Continuously adjustable speed from 0.05 to 0.7 rpm (higher speeds available at extra conversion cost) Turntable diameter: 1200 mm Tilting up to 120° Height horizontal: 1,050 mm, tilted up to center: 880 mm Hand and foot remote control Dimensions: 1.35 m (length) x 1.2 m (width) Chuck or quick-change chuck available for extra charge, depending on size As shown, diameter 1000 mm, price: €2,900 (special price, only available when purchased with the welding positioner) Counter bearing with steps: €480, counter bearing with screw adjustment: €880; load capacity 4000 kg

Condition: new, table length 2400 mm table width 1200 mm Hodpfsgvkfyox Aacow table height 200 mm weight of the machine ca. 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control Hodpfegvkgtox Aacsw - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 350 mm table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. - Rotation and tilt axis Hodpfjgvkk Njx Aacew - Infinitely variable speed - Compact model - Incl. Foot pedal

Year of construction: 2021, condition: used, current capacity - kVA number of controlled axis - workpiece weight - kg Used Lorch Cobot Welding Package CB3 series incl. PushPull torch + rotateOne rotary positioner Cobot operating hours: 334 hours. Features/Description: - Optimal for aluminum applications - Complete set of Cobot and Lorch welding equipment - For mounting on welding tables with hole size 16 or 28 (welding table not included). package included) - Welding system with special cobot interface, full-process equipment and Cooling system with increased cooling capacity, can also be used as a manual system if required - PushPull Cobot burner with 3.5 m hose package length and dual-circuit cooling - Burner original equipment set for aluminum 1.0/1.2 mm - Boom boom with balancer and line holder for optimal hose parcel handling *Technical data Welding range (in A) 25-400 ED 100% 40°C (in A) 320 ED 60% 40°C (in A) 350 ED at max. current 50% - RotateOne rotary positioner with 200mm 3-jaw chuck - integrated into the cobot control (no additional control) *Technical data Rotation speed up to 90°/s Load capacity 120 kg Torque up to 45 Nm Tilt angle -10° to 90° (manual) Important: The machine offered is an incomplete machine according to Machinery Directive 2006/42/EC, Article 2g. Hsdpfx Aajrr Amiocow A protective device in accordance with country-specific guidelines is required. The machine integrator therefore has to create all the necessary documents Additionally: (optionally available) - SIEGMUND welding table

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg Hsdpfx Aajh Evt Uscsw table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. Hedjgvkc Tepfx Aacow The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 913 kg 7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding Hodsgvkf Dopfx Aacow - Bore Ø 28 mm - Holes surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X

Condition: new, 0,6 t -- mm -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Hsdpfxegvq Hle Aacew Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N Stop and clamping angle 500 G with turning angle left - Left stop 1x article no. 2-280165.N Stop and clamping angle 500 G with right angle of rotation - stop on the right - Cast / nitrided 4x article no. 2-280152.N Stop and clamping angle 300 G - nitrided - Left stop - nitrided 8x article no. 2-280651.1. Prism Ø 60 135 ° with screwed-in collar - aluminum - aluminum - M16 thread for e.g. B. Prism Extension Item No. 280649 16x article no. 2-280610.N Professional screw clamp - nitrided - nitrided 6x article no. 2-280630.N Professional screw clamp 45 ° / 90 ° - nitrided - nitrided 4x article no. 2-280426.N Universal stop 300 - nitrided - 3 system holes - nitrided