Used Welding Smoke Suction System for sale (40,062)

Condition: new, table height: 800 mmmessurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 481 Fpedpfx Aaofk Aimj Esd Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 2980 x 1480 x 650 bis 1050mmtable width: 1480table length: 2980weight approx.: 945This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Fpsdpfxefk Ains Aa Ejd For more information please follow this link:

Condition: new, table height: 800messurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 630This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. For more information please follow this link: Fodpfxsfk Aipj Aa Ejpd

Condition: new, table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950 mmtable length: 1950weight approx.: 358This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Fsdpfxsfk Ai Ae Aa Eopd For more information please follow this link:

Condition: new, table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 375 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Fsdpfsfk Ai Esx Aa Espd For more information, follow the link:

Condition: new, table height: 800messurements (LxWxH): 1450 x 950 x 800table width: 950table length: 1450weight approx.: 315 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Fpodofk Ai Hjpfx Aa Ejd For more information, follow the link:

Condition: new, table height: 800 mmmessurements (LxWxH): 2980 x 1480 x 800table width: 1480table length: 2980weight approx.: 630 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Fpodpfx Ajfk Ailsa Esd For more information, follow the link:

Condition: new, table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 285 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Fedpofk Aiwjfx Aa Eopd For more information, follow the link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 425This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Fodpfx Aofk Aixsa Eopd For more information please follow this link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1980 x 1480 x 650 bis 1050table width: 1480table length: 1980weight approx.: 491This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. For more information please follow this link: Fpsdpfofk E Dzex Aa Esd

Condition: new, table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 428This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. For more information please follow this link: Fpsdpfxegrvwio Aa Eed

Condition: new, table height: 800 mmmessurements (LxWxH): 1480 x 1480 x 800table width: 1480table length: 1480weight approx.: 332 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Fodpegrz Tpofx Aa Eopd For more information, follow the link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1480 x 1480 x 650 bis 1050table width: 1480table length: 1480weight approx.: 464This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Fedpfsgrz Tlox Aa Eopd For more information please follow this link:

Condition: new, table height: 800 mmmessurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 530 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Fpedpfx Aaefk Aiqj Esd For more information, follow the link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 490This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Fodpfxofk E D Ds Aa Eopd For more information please follow this link:

Condition: new, table height: 800messurements (LxWxH): 1400 x 900 x 800table width: 900table length: 1400weight approx.: 235 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link: Fodpfx Aaofk Aits Ejpd

Condition: new, table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 475This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Fpodpfx Aasfk E D Ae Esd For more information please follow this link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 308This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. For more information please follow this link: Fpsdpfx Aegrvv Tsa Esd

Condition: new, table height: 650 - 1050messurements (LxWxH): 1400 x 900 x 650 bis 1050table width: 900table length: 1400weight approx.: 305This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Fpedpogrvwbefx Aa Eod For more information please follow this link:

Condition: new, table height: 800messurements (LxWxH): 1480 x 1480 x 800table width: 1480table length: 1480weight approx.: 602This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Fpsdsgrz Ttopfx Aa Esd For more information please follow this link:

Condition: new, table height: 800messurements (LxWxH): 1480 x 1480 x 800table width: 1480table length: 1480weight approx.: 469 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link: Fpedpfx Aaegrz Twj Ejd

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. Fjdpfx Aaowc Nrno Espd The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: excellent (used), functionality: fully functional, Central conveyor system consisting of: Fsdpfxjwg H R Ns Aa Ejpd 1. Piovan type F44/2 vacuum pump 2. 10 Piovan material conveyors 3. 2 Piovan type LYBRA V coloring devices

Condition: used, filter area: 252 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Filter cleaned with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Fjdpevzy Irjfx Aa Espd Parameters: Efficiency - 12000 m3/h Filtration area 252 m2 Cartridge filter inserts - 12 pcs. 15 kW engine inlet diameter - 500 mm Dimensions: height - 3.65 m width - 2.10 m depth - 2.10 m fan: 1.75 m x 1.50 m height 1.45 m stock no.: 0948

Year of construction: 2006, condition: good (used), Welding fume extractor,dust collector,self-cleaning filter,pneumatic,vacuum RITTER brand. For welding, grinding, sandblasting and all kinds of dry dust. Cartridge filter in good condition. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. The device for continuous operation Fan in sound absorbing housing with power 2,2 Kw Capacity 1200 m3/h Fpsdpjhyg Ivefx Aa Eod Filtration surface 10 m2 Additionally equipped with automatic spark detection and extinguishing system. The spreading of sparks is usually caused by the operation of production machinery or material contamination. The result is downtime and loss of business, and often a serious threat to human life. Therefore, in order to eliminate such risks, pneumatic and mechanical conveyor systems must be monitored for sparks and protected by spark extinguishing systems.