Used Welding for sale (5,608)

Condition: good (used), Year of construction: 2001, total height: 2,100 mm, total length: 3,200 mm, total width: 1,000 mm, overall weight: 12,000 kg, plate diameter: 5,000 mm, Welding positioner ESAB - DB-150 MACH-ID 9796 Make: ESAB Type: DB-150 Year: 2001 1 x Driven Master unit 150 ton 3 x Slave Idler unit 150 ton Vessel diameter 1000 - 5000 mm Wheel diameter: Wheel width: Rotation speed 10 - 1000 mm/Min Load capacity per section:150T Gbjdjzw Hh Hspfx Aayet Vessel range Minimum: 1000 Vessel range Maximum: 5000Ø No of wheels per section:4 Length: 3200mm Width: 1000mm Height: 2100mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2008, throat depth: 680 mm, nominal power at 50% duty cycle: 45 kVA, input voltage: 400 V, Combined roll seam and spot welding machine, type UN63 - Roll seam welding - Rated voltage 400V/50Hz - Rated power 45kVA - Welding current 15kA - Fuse rating 125A - Overhang 670mm - Upper roller diameter 175mm - Lower roller diameter 120mm - Arm distance 350mm - Electrode force 500daN - Stroke approx. 30mm - TE500 control unit with 99 welding programs, parameters for each program, digital current display after each weld, current monitoring, stepper function, Language selection: German, English, Italian, French, etc., with operating manual - 2-stage foot switch according to UVV standards - Machine main switch - Pneumatic maintenance unit - Weight approx. 680kg - Documentation with circuit diagram, compressed air diagram, and cooling water circuit - VAT can be shown separately - Spot welding fixture / electrode holder and lower arm available at an extra cost. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment. Godpfx Aaozh Izcsyobt On-site commissioning is subject to a fee, billed according to actual effort.

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Gbsdszikb Ujpfx Aayot Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: excellent (used), Tucker Nimak MF180: Godpfx Ajzgcm Reayobt Robotic welding tongs for single-sided resistance spot welding The robotic welding tongs for single-sided resistance spot welding from NIMAK utilize state-of-the-art medium-frequency transformers, a control system with adaptive welding current regulation, and finely adjustable welding cylinders for gentle power. Here, the right amount of force is crucial to reliably join materials without deforming them or leaving marks on the visible side. Our systems master this task perfectly. Tucker Stanley Punch Riveting Tool, C-Frame With the Tucker® SPR equipment, you can join materials that cannot be easily welded, including aluminum-aluminum, aluminum-steel, and high-strength steel, by combining two technologies in a modular system: punch riveting with semi-hollow rivets and solid punch rivets. AEG SVS Welding Technology Electrode Grinding Device EF310-01E-S-D-Fix Grinding of spot welding electrodes Automatic rivet feed With controller: The brain of every SPR system. It manages, thinks, remembers, and communicates in an Industry 4.0 environment. The lung – small, quiet, and fast rivet feed for your SPR tool. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2019, 1 used CNC stud welding machine Manufacturer: HBS HBS Type: CPW0604/1K/1MZ Year of manufacture: 2019 Working area: 600 x 420 x 120 mm / 23.6" x 16.5" x 4.7" T-slot work table: 800 x 490 mm / 31.5" x 19.3" Welding range: M3 - M8, Ø 3 - 8 mm (Ø 10/12/12.7 mm only possible with modification) #4 - 5/16", Ø #4 - 5/16" (Ø 3/8" - 1/2" only possible with modification) Stud length: 8 - 40 mm / 0.31" - 1.57" (other lengths available upon request) Welding performance: Up to 30 studs/min. (depending on configuration) Feed rate: 25 m/min. (X-Y), 20 m/min. (Z) / 82'/min. X-Y, 65.6'/min. Z Stud feed: Automatic stud feed (up to 3 different stud lengths per welding head) Positioning accuracy of the welded stud: ± 0.2 mm / ± 0.008" Positioning and repeatability accuracy: ± 0.05 mm / ± 0.002" Welding head: KAH 412 Godpfozq R Uwsx Aaysbt KAH 412 LA (mechanical length compensation - gap) Max. number of stud welding heads: 1 Connection values: Electrical: 400 V*, 16 A, 50 Hz; Pneumatic: min. 6 bar / max. 10 bar / internal hose diameter 6 mm Motorized Z-axis: Z = 0 - 120 mm / 0 - 4.7" (freely programmable via servo drive) Control: High-performance PLC according to IEC 61131-3 Display: 9-inch touchscreen Keyboard: Touch Dimensions (L x W x H): 1600 x 950 x 1900 mm / 63" x 37.4" x 74.8" Weight: Approx. 640 kg / 1410.96 lbs

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). The line includes: ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film Gbedpfozp Nz Tsx Aayot ● Machine safety fencing ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right ● Profile arrangement on the table: outer side of the window facing down ● Maximum dimensions of processed frames: 2500 x 2500 mm ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Condition: used, Year of construction: 1998, machine/vehicle number: B 1 - 151, Item No. 26242 Godpfx Aaozzpt Hjyobt Technical data: - Max. load capacity 100 kg - Faceplate diameter 300 mm - Through spindle bore 65 mm - Faceplate can be swiveled 0 - 90° - Table height in horizontal position 720 mm - Rotational speed, electrically adjustable 0.2 - 6.0 1/min - Right - and Left-hand operation - E - Foot pedal - Welding current transmission approx. 400 A - Power supply 230 V - Table height in horizontal position 1050 mm - 3-jaw chuck with handwheel for opening and closing 250 mm - Space required approx. W 1600 x H 1050 x D 1600 mm - Weight approx. 400 kg

Condition: good (used), Year of construction: 2008, Welding fume extraction system / Kemper – used: Price ex works: €750.00 (net)! Manufacturer: Kemper Type: EFF 86100 Year of manufacture: 2008 Machine number: 208245 Volume flow rate: 1,200 m³/h Max. static pressure: 1,350 Pa 230V, 7.6A, 1.1kW, control voltage: 24V High voltage: ionizer: 11.5 kV / collector: 5.8 kV IP 54 Weight approx. 105 kg Condition: good Available: immediately Location: Leipzig Gbodpfx Aajzp Rw Nsyet

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 356801, arm reach: 706 mm, We only used the TIG welding robot for 2 months. The machine is in perfect condition. The extraction system was never in operation. The machine enclosure and welding table are included. The “Ready2_pilot” programming and material feed for welding can be retrofitted at any time. Gbedpfx Aaexw R Nneyjt

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel Godpfx Ajxrb Tgsaysbt - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: good (used), Year of construction: 2001, machine/vehicle number: ZAC-N-14354, Offer 26162 Technical data: - Rated power at 50% duty cycle: 80 kVA - Max. welding power: 211 kVA - Reach: 350 mm - Welding parameters: - Steel sheet: 8 + 8 mm Godpjzfigzsfx Aayjbt - Brass sheet: 4 + 4 mm - Aluminum sheet: 4 + 4 mm - Electrode force, adjustable: 100 - 600 daN - Required air pressure: 6 - 10 bar - Cooling water flow rate: 12 l/min - Control system: DALEX MPS 8043-1 for: - Holding time; current time; - Post-flow + open-arc time, as well as - Rise time + pulse + pause time - Power supply: 400 V - Space requirement: approx. W 950 x H 2100 x D 1500 mm - Weight: approx. 600 kg - Includes: - Complete electrical and pneumatic system - Foot-operated switch

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Gjdpfxszikcfe Aayobt Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, throat depth: 430 mm, nominal power at 50% duty cycle: 88 kVA, type of cooling: water, overall weight: 279 kg, Electrode holder, electrode arms, transformer and water-cooled electrodes Welding controller with graphic display Medium-frequency technology / inverter Welding controller PY800 Electrode stroke 60 mm Water requirement 9 L/min Gbjdpoyvx Hzsfx Aayet

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Weight (kg) 1000 Length (m) 2.3 Height (m) 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions Godpfjzt A H Rjx Aayobt We can assist with delivery to any location. The machine is in very good technical condition. The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland.

Condition: excellent (used), Year of construction: 2019, Plasma cutting system Swift Cut Pro 3000 Cutting area: 3000 × 1500 mm Plasma power source: Hypertherm Powermax 125 Plasma cutting current: 30–125 A Piercing (structural steel): 25 mm Gsdpfxezyvgds Aayjbt Well-maintained system, purchased in 2019, with few operating hours.

Condition: ready for operation (used), EWM Integral MIG 450 DW P Pulse Welding Machine Technical data see image no. 2 You are welcome to come for an inspection. Godoyh Enrjpfx Aaysbt We can organize affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. Prerequisite is a valid VAT identification number. Subject to prior sale. Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 10006472, total height: 2,200 mm, overall weight: 900 kg, space requirement length: 1,800 mm, space requirement width: 100 mm, Filter and extraction unit with automatic cleaning. Suitable for smoke extraction during laser, plasma, and oxy-fuel cutting, blasting, welding, grinding, and powder coating. Year of manufacture: 2020 Model: 10124806 Serial number: 10006472 Motor: 4 kW - 400 V Number of filter cartridges: 2 Raw gas inlet: 200-250 mm Raw gas outlet: 300 mm Gbedpfszwxansx Aayst Width x Depth x Height: 1,200 x 1,800 x 2,200 mm Weight: 900 kg Note: No warranty, installation, commissioning, and transport are included. Subject to prior sale.

Condition: used, Equipment: type plate available, Powerful TIG Welding Unit for Professionals The EWM TIG 350 DC FWD is a high-quality, water-cooled DC TIG welding unit from EWM, engineered for demanding applications in metal construction, industry, and professional workshop environments. This high-performance machine enables precise DC TIG welding with up to 350 A welding current and offers superior arc stability, high weld quality, and efficient cooling – ideal for steel, stainless steel, nickel alloys, copper materials, and other metal workpieces. 🔧 Welding Performance and Technology Direct current TIG welding (DC) with an adjustable range up to approximately 350 A – powerful penetration and precise control. Robust inverter electronics ensure stable arc performance and high efficiency. The water-cooled design allows continuous operation even under heavy-duty conditions. ⚙️ Features and Operator Comfort Proven operation with an intuitive control panel – easy adjustment of welding parameters. Connection options for remote control and torch functions for added convenience. Splash-proof housing rated to IP23, suitable for tough workshop environments. Energy-efficient operation thanks to high efficiency and standby function. Dimensions: 1000 x 520 x 900 mm Weight: approx. 180kg All information subject to change or errors. Gbodpfxjyililj Aayjt

Condition: ready for operation (used), EWM Phoenix 351 Basic Plus KW welding machine For technical specifications, please refer to image no. 2. You are welcome to visit and inspect the machine. We are happy to arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you supply a valid VAT identification number. Subject to prior sale. Gbedpfxjyh Az As Aayet Visit our shop and check out our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations from the technical specifications as well as errors in the item description may occur and are subject to change.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Water-cooled, pneumatic spot welding tong Nimak L193 TB. Very good used condition, fully functional. Item located in 75053 Gondelsheim. See photos. Shipping by forwarding agent or collection. Gbodpfx Aajxmuypsyet

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling system and accessories. For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully functional workshop device and features state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. hose set • Ground cable • Maintenance unit for gas / pressure regulator Gbedpfx Asyxvwisayjt _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 is carried out directly via the back of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for demanding applications in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ The device is in a ready-to-use condition. Inspection and test run can be arranged.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 8,065 h, machine/vehicle number: 8008, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BECKHOFF, laser type: fiber laser, laser source manufacturer: nLight, laser source model: 15000, laser power: 15,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, table length: 25,100 mm, table width: 3,100 mm, table height: 900 mm, working length: 25,100 mm, working width: 3,100 mm, working height: 900 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.35 mm, workpiece weight (max.): 24,750 kg, type of cooling: water, overall weight: 55,000 kg, warranty duration: 6 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, We are offering for sale a state-of-the-art NUKON EXTREME LARGE laser cutting machine from 2022, equipped with a 15 kW nLIGHT fiber laser source with Corona technology, CNC control, and Beckhoff drives. The machine is in continuous production use, fully operational, and available for viewing during operation. This solution is designed for the most demanding production facilities engaged in cutting large-format parts, steel structures, and thick sheets. Technical data: Manufacturer: NUKON Model: Extreme Large 30250 BEVEL Year of manufacture: 2022 Laser power: 15 kW Laser source: nLIGHT Fiber Laser with Corona technology Working area: 3000 × 25000 mm Cutting head: BEVEL – bevel cutting up to ±45° CNC control: Beckhoff Servo drives: Beckhoff Equipment and advantages: - High-performance nLIGHT laser source equipped with Corona technology, enabling dynamic adjustment of the laser beam characteristics depending on the material type and thickness, resulting in higher edge quality, faster piercing, and increased production efficiency; - Professional Beckhoff control and automation system, valued for its speed, precision, and reliability in industrial applications; - BEVEL cutting head, allowing for the execution of welding bevels without the need for additional processing; - Ability to cut large-format sheets up to 25 meters in length; - High dynamic performance and excellent cutting quality; - Ideal for the production of steel structures, components for heavy industry, energy, offshore, shipbuilding, and machine manufacturing. Technical condition: The machine was commissioned in 2022 and has been in operation at a production facility ever since. It is regularly serviced, is in very good technical condition, and is still in use, allowing for the possibility of conducting tests and viewing the machine during operation in production. The buyer has the opportunity to perform their own cutting tests and thoroughly check all the functions of the device before purchase. Upon request, we can provide additional photos, videos of the machine in operation, and a complete technical specification. We invite you to contact us for detailed information and to arrange a demonstration of the machine. Gbodpezphkmjfx Aayjt PRICE: 300,000 EUR

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment (virtually silent) Excellent condition (like new) Minimum height: approx. 486 mm (tilting axis 0° horizontal) Maximum height: approx. 1438 mm (tilting axis 0° horizontal) Minimum height: approx. 525 mm (tilting axis vertical) Maximum height: approx. 1477 mm (tilting axis vertical) Lower arm length 1500 mm (radius) Upper arm length 1900 mm (radius) Connection: 16 A plug Overall height 3250 mm Rotational speed approx. 0.2 - 2.0 rpm Torque 24000 Nm Lifting speed 1.5 m/min Gsdsyupl Depfx Aaysbt Handheld remote control

Condition: good (used), Year of construction: 2002, Ingersol rand streamline plus waterjet intensifier pump. good working condition Godpsnp Iywjfx Aaysbt

Condition: excellent (used), pneumatically operated, water-cooled spot welding tongs Manufacturer: DALEX, Type 3329 with double-acting cylinder, long stroke 60 mm, pre-stroke 40 mm, working stroke 0-20 mm Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 17 kA Secondary open-circuit voltage: 4.7 V Electrode force: 440 daN Arm outreach: 350 mm Arm spacing: 300 mm Gsdpfxozymccj Aaysbt with universal joint suspension and suspension bracket 10 m connection cable and control cable with Harting connectors for connection to auxiliary control unit B 200 with synchronous welding control MPS 10