Used Winding Groove Tubes for sale (3,911)

Year of construction: 2014, condition: ready for operation (used), Additional Equipment Bundleloader: 6.5 meters Steploader: 6.5 meters Output with Conveyor Belt: 6.5 meters at the front, 4.5 meters at the back Rsdpjx H A Rxefx Aaaobw This BLM Adige LT8 4kW Co2 was manufactured in 2014. It features a Rofin DC035 3.5kw laser source and is equipped for tube cutting with a 3D cutting head. It handles materials up to 12mm thick and 206mm round, with lengths up to 6500mm. Consider the opportunity to buy this BLM Adige LT8 4kW Co2 tube cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: used, Year of construction: 1979, Roundo plate/pipe roller. In recent years, it has primarily been used for rolling smoke pipes with a diameter of 150–160 mm. Four pallets with rollers are included; they are used to determine the pipe diameter. Using a pneumatic cylinder, the end is opened to remove the rolled pipe. I have tested the machine, but the rollers do not run. There is probably a simple solution for this. Machine and rollers weigh approximately 3–4 tons. Rbsdeyvqc Uspfx Aaaow

Condition: good (used), Year of construction: 2014, Technical Description The ROBOPAC COMPACTA 4 is a manually operated horizontal wrapping machine with a rotating ring designed for spiral wrapping of elongated products using stretch film (horizontal wrapping machine, stretch wrapper). The machine is equipped with a belt-driven, one-piece cast aluminum rotating ring mounted on heavy-duty rollers to ensure smooth and consistent rotation. The integrated tensioning and cutting system enables automated wrapping cycles, while the mechanical film carriage with dancer system guarantees optimal film pre-stretch. This machine is particularly well-suited for flexible use with a wide variety of workpieces. Technical Data Rated voltage: 230 V Frequency: 50/60 Hz Phases: 1Ph+N Installed power: 0.55 kW Max. ring speed: approx. 150 rpm Operating pressure: approx. 6 ±1 bar Rsdpfxsywn Nus Aaajbw Compressed air consumption: approx. 1.8 NI/cycle Film width: 50–125 mm Max. reel diameter: 200 mm Core diameter: 76 mm Min. workpiece size: approx. 50 × 50 mm Weight approx. 250–350 kg Dimensions approx. L × W × H = 1010 × 1234 × 1340 mm Intended Use For wrapping long goods such as wooden slats, profiles, aluminum parts, plastic profiles, or bundled goods in the packaging lines of the wood and plastics industries. Condition Used – tested and fully functional, signs of use as shown in the photos.

Condition: good (used), Duplo DC 615 in good condition Rbsdpoytr Raefx Aaasw

Condition: good (used), Morgana AutoCreaser 33 in good condition Rbodpfsytrz Eox Aaasw

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, total width: 966 mm, total height: 714 mm, DGUV certified until: 04/2028, conveyor belt width: 750 mm, input frequency: 50 Hz, Equipment: chassis, Baguette - long roller Model: Forma with 3 rollers Capacity: min 50 - 1200 g max (depending on the type of dough) Redpfx Aaehwzkksaobw Unrolling width: up to max. 750 mm stainless steel design, Connection: 400V, 1.1 kW, 16A-CEE plug Dimensions: 966 x 855 x 714 mm, WxDxH NEW machine with 24 months warranty Option: base speed controller infeed conveyor discharge tours Discharge belt with drive feed guides Visit our large bakery machine park!

Condition: reconditioned (used), functionality: fully functional, Löser RP+S374-1, centerless tube grinding machine, cylindrical grinding machine, wet grinding, wet machining Belt grinding station: one Grinding belt: 150 x 2500 mm Rbedpjyxdgljfx Aaaew Contact wheel: 150 x 400 mm Belt tension: pneumatic Wheel drive: 5.5 kW Part feed: 0 - 8 m/min Part diameter: 10 - 100 mm Part length: 60 - .....mm Working direction: from right to left

Condition: excellent (used), Year of construction: 1999, With the AL100 U, you can notching workpieces from Ø 20 to Ø 76.1 mm. The cross support and the carriage with a swivel clamp are steplessly adjustable. This allows grinding of all pipe profiles at any desired angle from 30° to 90°. The AL100 U is capable of grinding square, rectangular, and round tubes of various wall thicknesses and is suitable for all common materials. The abrasive belt can be quickly tensioned, and the grinding rollers can be changed within seconds. Contact rollers are available in all standard sizes. Rjdpsyplmtjfx Aaaobw Technical Data: Belt width: 100 mm Belt length: 2000 mm Belt speed: 30 m/sec Voltage: 400 V Motor speed: 2800 rpm Motor power: 3 kW Machine dimensions (L x W x H): 1350 x 600 x 1200 mm Weight: 136 kg Accessories / Special Features: • High-performance belt grinder with high belt speed • Robust three-phase motor • Low vibration • 3 grinding rollers for precise notching on tubes, profiles, and flat materials: o 1 contact roller with Ø 21.5 mm for 3/4" pipe o 1 contact roller with Ø 40.5 mm for 1 1/4" pipe o 1 contact roller with Ø 46.5 mm for 1 1/2" pipe • CE compliant Additional contact rollers available in all standard sizes. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151 - 153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), functionality: fully functional, machine/vehicle number: 3005, Foellmer Motor Perforating Machine 45 ME with creasing and micro-perforation tool (see image) Activation: Electrically via foot switch. Working width: 45 cm / Table size: 60 x 35 cm Performance: Up to 15 sheets (depending on material) Dimensions H x W x D in mm: 1120 x 600 x 1000 Weight: 117 kg Connection: 400 V / Operating manual included. Shipping at buyer's expense possible. Collection possible. Redpfx Aowu Dvfoaasbw Our offers concern used machines, which may show signs of use (minor scratches or yellowing).

Condition: good (used), Year of construction: 2005, control type: CNC control, - Max. bending angle: +/- 180 + 10° - Tube feed length: 4100 mm - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes: 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec (advance) - Longitudinal feed speed: 450 mm/sec Rodpfxoyx Ur Sj Aaasbw - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Condition: good (used), Year of construction: 2008, control type: CNC control, Stainless steel tube diameter: up to 42 x 2.0 mm Rbsdpfsyx Un Hex Aaaow Steel tube diameter: up to 42 x 3.0 mm Max. bending angle: +/- 180 + 10° Section modulus: 4.1 ccm Operating pressure: 6 bar Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 6100 x 2300 x 1300 mm

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 8271T, creasing machine Rsdpfeykrvkox Aaaebw

Condition: new, Year of construction: 2026, SEMI-AUTOMATIC DRILLING RIG “UNIBORFIX 50” With the UniBohrFix 50 drilling system, all profiles can be machined against a stop or with grippers. The Drilling is done manually using the lever, with the materials on the X-axis automatically pointing to the drive to the next drilling position. Easily drill entire programs or work with the stop plate quickly carry out individual drillings. The system is suitable for weights up to 100 kg. The facility also contains a minimum quantity spray unit with holder and spray can. The technical data of the standard version can be found in the table. If necessary, all components of the system can be adapted to your requirements. You can choose between different drilling machines, roller conveyors, select positioning systems and vices. Plantec configures the system so that it suits you perfectly! ADVANTAGES A sequence of holes is automatically executed at precise intervals. Potential operator errors are drastically reduced. Programming takes just a few minutes. Very good value for money. Significant reduction in manpower. Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 2 T Spindle MK2 Continuous drilling capacity 18 mm Speed ​​ranges: 100-2000rpm, 200-4000rpm Projection 225 mm Spindle/table distance 60-400 mm Adjustable vice with measuring linear display Positioning length stop: PD-100e control for automatic positioning Positioning: absolute or chain dimensions Easy to read LED display Trolley with DC servo motor Positioning accuracy +/- 0.1 mm/m Attachment arm with spring damping Stop plate with groove Memory control with 3,000 memory options Roller conveyors: RD-200/3 load capacity 200 kg/m Roll width 290 mm Roll diameter 40 / 50 mm Rbsdpjgwt Slsfx Aaaow insert sheets Struts for stabilization switch cabinet Available options: Minimum quantity spray system with spray head and holder Gripper tongs for clamping the material on the stop plate

Year of construction: 1996, condition: used, Wind-up double Rbjdpfx Aaoditlweaew Built in 1996

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. We can bend pipe from 18 mm - 60 mm Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00 Rbodpfjyvhl Hex Aaajw

Condition: ready for operation (used), Year of construction: 2005, A total of five identical Vestas wind turbines are expected to be available from early 2027. Rated power: 850kW, rotor area: 2124m², rotor blades: 3, rated speed: 26rpm, generator voltage: 690V, gearbox stages: 3, cut-in wind speed: 4m/s, rated wind speed: 16m/s, cut-out wind speed: 25m/s, tower material: steel, hub height: 74m, nacelle weight: 22t, rotor weight: 10t. Documentation available. An on-site inspection is possible. Individual sale possible. Rbjdoywlpxepfx Aaaew

Condition: good (used), V-belt pulley, belt pulley, double wheel pulley, variable pitch roller, V-belt pulley with variable pitch -V-belt pulley: Roller V-belt pulley with variable pitch -Adjustment range: 17 - 35 mm -Hole: Ø 28 mm -Dimensions: Ø153 x 72 mm Rbedpfx Aaeymb Emjajw -Weight: 5.1 kg

Condition: like new (used), functionality: fully functional, Very nice creasing machine for sale. Brand Morgana. Model Autocreaser. Including perforating set. Max sheet size 630 x 330 mm, memory for 9 separate jobs. Voltage 230V single phase. This machine is 100% operational and lightly used. You are welcome to test the machine at our premises. We can arrange transport/packaging for you and load it into a truck or container. Ask for a price including transport (location: the Netherlands). Regards, Henk Hoos. Rodpfx Aajyrp Sloaobw

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 6,500 mm, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Process/software features: NoLine, PowerLine, ContourLine, Laser power control, Programmable cutting pressure, Program repeat, Automatic blow-off, Work interruption lighting, Hole-punching function (laser) Rodpfxox D I H Ds Aaaebw • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting head: Laser cutting head with 155 mm lens • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Capacitor power 1600 N/cm², Safety with macro stops Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 216 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • LoadMaster Tube 6 m with belt support, 2 grippers • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: BR-BTRS-100-250003, As-new Brinkmann Technology BTRS100 screw conveyor, year of manufacture 2025, equipped with control unit, flushing valves, adapter pieces, adjustable motor power, and Easy-Clean cleaning package. Rbedpfx Aoytql Nsaasw We have only tested the screw conveyor. Due to a change in technology, it has never been put into operation. Manufacturer: Brinkmann Technology GmbH Year: 2025 Type/Model: BTRS100 Designation: BTPS100 pipe screw conveyor Serial number: BR-BTRS-100-250003 Power: 1.5 kW Original price: €13,000 (net) Further documents (technical drawings, operating manual, invoice, etc.) available upon request. If you have any questions or require more information, feel free to send us a message or call us.

Condition: good (used), functionality: fully functional, Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line Rbodpfx Asytpimsaaew

Condition: good (used), functionality: fully functional, Year of construction: 2003, laser type: CO₂ laser, laser power: 2,700 W, X working area max.: 6500 mm Laser power: 2700 watts Control: SINUMERIK 840D Standard equipment TRUMPF loading unit: - Tube feeder for round, square, and rectangular tubes via buffer section with X-stop Rjdpfx Aasytfyzoaebw for tube lengths min. 3 m and max. 6 m - Semi-finished product length measurement - Transfer unit to the machine - Tube magazine with tube separation, alignment, and transfer to tube feeder, max. bundle weight 4000 kg - Good parts removal up to max. 3,000 mm with chip conveyor - Additional tube supports - Tube handling unit: Rotating and feed station: Rotating clamping unit with pneumatically actuated clamping jaws for tube lengths up to 6000 mm and tube diameters of d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit with linear guidance - Feed station with motor drive, including connection for extraction - Tube support: Between tube support and traverse chuck, five automatically retractable support elements with form shells are provided - Traverse chuck: With a passage of d = 150 mm - The tubes are positioned via the clamping jaws centrally in the Y and Z axes relative to the rotational axis for the cutting process - 2 sets of clamping jaws for round, square, and rectangular tubes (simple design), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm can be automatically unloaded (front and rear) Safety equipment: - Compact extraction unit Filter system designed for the separation of airborne particles produced during laser cutting of metals - Light barrier: Loading area secured by light barriers - Protective cabin: In the area of the cutting head, a Macrolon sheet metal combination is installed for laser radiation protection - Chip conveyor: Conveyor belt for discharging cut remnants - Operating manual

Condition: ready for operation (used), Year of construction: 2022, A capacitor winding machine Hilton Industries in a perforator design with a center-wind system is available. Tool plate: aluminum, max. winding width: 125mm, min. web width: 38mm, dielectric spindles: 10, foil spindles: 3, max. roll diameter: 203mm, bobbin core inner diameter: 76mm, spindle design: O-ring, max. spindle load capacity: 11.3kg, working height range: 690mm-740mm. Machine dimensions X/Y/Z: approx. 2450mm/2050mm/2250mm, weight: approx. 2050kg. The machine control system is defective. Documentation available. An on-site inspection is possible. Rjdpfoyvuvfex Aaaebw

Condition: good (used), Year of construction: 2003, Manufacturer: AXOMATIC Model: OPTIMA 800 Year: 2003 Weight: 700 kg Dimensions (L x W x H): 2.20 x 1.10 x 2.10 m Product description Automatic tube filling and sealing machine with volumetric dispenser for liquid, sticky, viscous, and pasty products. Equipped with: - Automatic tube feeding into carousel buckets - Tube position centering station with photocell detection - Tray with 8 interchangeable buckets (adaptable to tube dimensions) for transporting tubes to the packaging station - Supplied bucket size: 35 mm diameter - Interchangeable volumetric piston dosing station with stainless steel rotary valve - Currently fitted with one 40 ml piston (alternative piston sizes available on request from supplier) - Tube filling station with stainless steel nozzle and anti-drip device - Single-wall conical hopper, 50-litre capacity - Tube heating station using Leister heater - Sealing station with heated jaw clamps, featuring water circulation cooling - Closing station with 1 pair of jaw clamps, enabling character embossing - Water circulation system for jaw cooling (currently supplied without chiller, but available on request) - Tube top trimming station for finishing cuts - Waste collection tank - Automatic discharge of finished tubes onto disposal chute - Programmable touch screen interface with Omron PLC control Rodpfjyr Nvkex Aaasbw - Variable-speed motorized drive system - Protective enclosures with safety interlock doors - Stainless steel frame - Maximum output: approx. 50 tubes/min (approx. 3,000 tubes/hour) - Total electrical power: 5.5 kW, 380 V - Air consumption: 6 bar - Water consumption: 4 litres/hour This technical description is suitable for use on machinery trading platforms such as Machineseeker or TruckScout24.

Condition: excellent (used), wire diameter - max. 5 mm total power requirement 7,5 kW Rsdpfxoyr Si He Aaajbw