Gas generator - MTU 8V4000L33

MTU 8V4000 GS Contrainerized

Condition: like new (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, machine/vehicle number: R40410, power: 371.43 kW (505.00 HP), empty load weight: 75,000 kg, cutting force: 900 t, COPEX REFLEX 900 ton mobile diesel shear baler (year 2023). Maintenance carried out by the manufacturer. Output: 10 to 22 t/h depending on the type of scrap to be sheared. Immediately available. Lodpfx Asxg Ekfsnxshl

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Lhodpfsytpbiex Anxsl Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Condition: new, pressure: 600bending length: 6050column width: 5100daylight: 680stroke lenght (max.): 455column throat depth: 450messurements (LxWxH): 7100x3275x3910weight approx.: 50.2004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 45Standard Equipment:KK Kletzer Europa We have developed a high-quality model specifically for the European market:The CNC press brake by KK Industries, made in Turkey. Model: KK Kletzer EUROPA XL The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile offers a very large open height, resulting in a long cylinder stroke, and an extra-large throat depth to provide maximum flexibility during operations. We focus on delivering quality—reflected also in the control system:As standard, the machine comes equipped with the ESA S640 2D graphic controller. Additionally, the KKI EUROPA XL is equipped with CNC-controlled Y1, Y2, X, and R axes via the wning is also included and fully CNC-controlled through the same ESA S640. When it comes to tooling, we make no machine is fitted with premium top tools and dies from EUROSTAMP Italy. Naturally, a machine is only as good as the service behind t’s why we rely on highly qualified staff with many years of experience in CNC sheet metal processing. Technical Highlights: CNC axes: Y1, Y2, X, and R Controller: ESA S640 (2D graphical interface) Backgauge with double linear guides and ballscrews Motorized CNC-controlled crowning system Heavy-duty height adjustment with handwheel(from 175 tons: on linear guides) Laser safety system on the upper beam CE-compliant safety equipment Various options available Optional Controllers: ESA S640 – 15” 2D Touchscreen: ¤ 4,520.00 ESA 675 W – 21” 3D Touchscreen (Windows-based): ¤ 6,485.00 DELEM DA-66T – 17” 2D Touchscreen (Windows-based): ¤ 10,165.00 DELEM DA-69T – 17” 3D Touchscreen (Windows-based): ¤ 16,350.00 Lhodpfx Aod Ehh Renxjl

Condition: new, Year of construction: 2024, functionality: fully functional, cutting force: 630 t, power: 110 kW (149.56 HP), total width: 2,400 mm, total length: 9,400 mm, total height: 3,800 mm, overall weight: 50,000 kg, cutting length (max.): 1,600 mm, type of input current: three-phase, Scrap Shear MS-6300mex (mobile version, with electrical motor) Diesel Generator 250KW is optional Modell: MS-63000e Cutting Power: 630t Lheder Ihzispfx Anxol Blade length: 1600mm Output size: 500mm Power: 110 KW Capacity: 8-15 t/h Machine Weight: 39 t (+ Dieselgenerator 4t) Hooper size: 3900mm x 2400mm Information: Container Shear is used for economical scrap processing/ easy automatic operation/ energy saving/ cost saving/ no foundation needed. It can cut any kinds of scrap material. Different models for your choice. Machine is not suggested to cut high-carbon steel; axles; wire rope; pig iron; spring steel plate; rail; alloy steel; hub and so on... (these are not good for blades) Function: Scrap is filled into the hopper by means of a grab loader. Due to the horizontal movement of the holder and the scrap’s dead weight, it falls to the bottom of the loading chamber and into the cutting space. After having been compressed on the front wall, the scrap is cut by the horizontally-moving tool-holding side via the blades on the front wall. While the tool-holding slide is moving horizontally, the processed material is pushed out via the blades on the container’s front wall. While returning to the rear position, the loaded scrap moves under its own weight into the shears’ interior. The scrap shear machines are available with different design, depending on the customer requirements. The output size can be choose (only for new order).

Condition: ready for operation (used), Year of construction: 2000, operating hours: 70,606 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, input frequency: 50 Hz, Equipment: rotational speed infinitely variable, GAS GENERATOR PLANT – CATERPILLAR 3516 (Complete Package) Complete natural gas power generation package, supplied with main auxiliaries and systems. The unit was operating at full load without issues before shutdown. All maintenance performed by authorized service providers, strictly following the manufacturer’s recommended maintenance schedule. Preventive maintenance carried out immediately prior to shutdown (2022): - Inspection/checking of key engine parameters - Bearing lubrication - Oil replacement - Filter changes (oil and air) - Spark plug replacement - Borescope inspection: documentation available Technical specifications: - Electrical output: 1,030 kW - Total operating hours (since new): 70,606 h - Year of manufacture: 1999 - Fuel: Natural gas Scope of supply (included): - Complete genset Lhsdpfxjytq Eij Anxel - Gas train - Control panel - Circuit breaker (alternator + transformer) - Heat exchanger - Silencer - Cooling system (HT aerofan and LT cooling tower) - Lubrication system Availability: Immediately The equipment has already been dismantled and is stored in our warehouse, ready for loading or inspection.

Condition: used, Year of construction: 2023, functionality: fully functional, fuel type: diesel, total length: 1,925 mm, empty load weight: 1,800 kg, construction height: 1,361 mm, drive type: Diesel, construction width: 1,110 mm, Other Lhedpfxeumvb Io Anxjl Technical Condition: New Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service, and repairs – you can get everything you need from a single source. Lease-purchase options, financing, and the purchase of used equipment are also possible. Our team will be happy to provide you with expert and personalized advice. Simply call us or send us a message via SMS or WhatsApp. The CAT DE110E2 is an emergency generator for construction sites, industry, and events. With its fuel-efficient diesel engine and robust design, this generator is ideal for providing power during power outages and for mobile and continuous use. Durable, versatile, and easy to operate. You can find more information and submit a non-binding inquiry on our website. Safe working at any height.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, fuel: liquefied natural gas (LNG), - 1x CHP unit - As new - Control cabinet still in original packaging - Located in Genthin We are selling a CHP unit in as-new condition. It has never been used, and the control cabinet is still in its original packaging. It has never been used but has been regularly maintained and is fully functional. The CHP unit is located in Genthin and can be inspected at any time. Ledpszazrajfx Anxjhl

Condition: used, functionality: fully functional, Year of construction: 2001, TEREX TR70. Year 2001. In very good condition. Tyres 24.00X35 at 70%, 80% and 90%. Ledpfx Aeyymtkonxjhl

Condition: used, Year of construction: 2015, operating hours: 19,600 h, functionality: fully functional, fuel type: gas, power: 2,028 kW (2,757.31 HP), output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, =Scope of supply= Complete set of 3 x MTU 16V4000 GS (16V4000L64) with Skid cooling groups Radiators Absorption chiller Genset outgoing breakers Lube oil systems Electrical auixiliaries panels MTU - MCS , MTU - MMC panels =Technical specifications= Time for delivery - in stock Engine type - 16V4000L64 Electrical power - 2028 kW Engine speed - 1500 rpm Total efficiency - 89 % Voltage - 400 V Frequency - 50 Hz Ledjzmnzajpfx Anxohl =Other information= Production country - Germany

Condition: new, functionality: fully functional, fuel type: diesel, power: 1,120 kW (1,522.77 HP), output voltage: 400 V, output frequency: 50 Hz, nominal power (apparent): 1,250 kVA, continuous power (apparent): 1,400 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, =Scope of supply= Genset Lhsdpfxoy Hc Dxo Anxol Raditor Agc 4 controller Silencer Compansator Batteries/ filters First filling of oil and antifreeze =Technical specifications= Time for delivery - in stock Engine type - 18V2000G76F Prime power - 1000 kW (1250 kVA) Emergency supply power - 1120 kW (1400 kVA) Engine speed - 1500 rpm Alternator type - Leroy Somer LSA 50.2 L7 Voltage - 400 V Frequency - 50 HZ =Other information= Production country - Germany