ZICK-ZACK fine material separator

NEUE HERBOLD ZS 500/300

Year of construction: 2016, condition: new, functionality: fully functional, HDPE Film washline construction year: 2016 0 working hours (was never in operation) brand: NEUE HERBOLD, D-74889 SINSHEIM consisting of: Wet-granulator type SM 450/600-S5-2 Friction washer type FW 560/3000 Conveying screw Itjdotuui Dopfx Ah Uor Floating tank (Floating - sink separation) type TB 500 Mechanical Dryer type TM 1005 Suction Unit type MFT 55/500 Electric control

Condition: used, machine/vehicle number: 12599, Rotor diameter: 600 mm Rotor width: 1450 mm Itjdpfek N Iy Nox Ah Uer 12-knife rotor 3 rows stator knives Inlet cross section approx. 780 x 1490 mm Drive motor: 132 kW

Condition: excellent (used), Year of construction: 2010, Material Testing Machine: ZwickRoell GmbH mod.Z005 TN Designed to perform standard tests on materials and components, allowing for precise measurements of strength, flexibility, and other material properties, which are crucial in engineering and material research. With advanced technology and intuitive software, these machines offer efficient and safe operation. The device includes accessories for measuring material tensile strength, compression, and bending. Technical Specifications: • Year of production: 2010 • Maximum load (Fmax): 5 kN • Test dimensions: - Height (without accessories): 1070 mm - Stroke height: 1000 mm • Frame dimensions: Itjdpouna Iusfx Ah Uor - Height: 1340 ... 1345 mm - Width: 770 mm - Depth: 439 mm • Weight: approximately 110 kg • Power supply: 230 V, 1Ph/N/PE, power consumption about 800VA The machine allows for the testing of various materials and components, including: • Construction materials: concrete, steel, wood • Plastics: flexibility, tensile strength • Metals: strength, hardness, and fatigue testing • Mechanical components: compression, bending, and tensile tests • Samples in various forms: thin-layered, block-shaped, tubular Thanks to the system's flexibility, tests can be adapted to specific requirements. TAG: Laboratory Equipment, Material Testing, EPS Styrofoam, Polystyrene Production, Mechanical Testing, Thermal Conductivity, Material Properties, Construction Materials, Quality Control, Engineering Research

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Isdpfxoufi Rxe Ah Ustr Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Stator blades: 2 plus blade set: 2 Blade setting table

Condition: excellent (used), Year of construction: 2012, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, working range: 4,000 mm, Used fully serviced, clean cutting Bystronic Bystar 4020 6kw 4metre x 4metre flat bed industrial cnc laser for sale Iodpeqcu Avofx Ah Ustr High powered Bystronic Bystar 4020 4metre x 2metre cnc laser for sale Power: 6kw / 6000 watt / Bylaser 6000 Cutting area: 4000mm x 2000mm Year / new: 2012 Fully serviced with Bystronic and well maintained With rotary axis for cutting steel tube Cutting heads: 5inch, 7.5inch and 7.5inch long head In good working order, can be seen in production Delivery, installation and tuition can be quoted Ideal for cutting thick stainless steel, mild steel and aluminium

Condition: new, Year of construction: 2024, 1. EPS COMPACTOR MOD. SAGITTARIUS-486 (MOD.) Custom IDEAL FOR: • Automotive industry, • EPP, EPE packaging manufacturers • EPP load carrier manufacturers • Companies that process PUR soft foam • Specialized disposal operations • Recycling companies. Technical data sheet Materials EPS (polystyrene) *Density reached 350-450 kg/m3 Hourly capacity 30-65 Kg approx. Block size 200 x 200 mm Loading opening (standard) 1,072 x 800 mm Noise level Standard: 76-90 dB Weight 1,200 Kg Dimensions 3,900 x 1,450 h= 2,000 mm Total power 8 kW Power supply 3 x 400V, 50Hz, 32° C E Approved marking How does the compactor work? 1. Simply throw the polystyrene waste into the machine's hopper. Ijdpsmhfd Esfx Ah Uetr 2. The shredder will break the polystyrene waste into smaller flakes measuring 20mm to 50 mm. 3. A drill compactor, positioned under the shredder, will press the polystyrene waste into compact blocks. 4. The final result will be densified blocks of up to 350 kg/m3 *density may vary depending on the type of material to be compacted

Condition: new, Year of construction: 2024, Description High quality galvanized steel housing Powerful, economical engines Standard optional intake connection at top or bottom Uniform filter bags for all variants Discharge in chip tons The modular models of the AL-KO AAS series are available in optimally matched performance categories with energy-saving and quiet motors that drive the fan on the raw air side and thus generate particularly effective overpressure filtering. Durable quality components and an all-metal housing made of galvanized sheet steel give you investment security as well as the many retrofit options. The particularly favourable price and short installation times also contribute to the fact that the AL-KO AAS is definitely the right choice. Technical data AL-KO AAS 3013 Itsdpfx Ajfc A Ursh Ujr Suction port 200 mm Nominal capacity 2.500m³/h Maximum volume flow 3.300m³/h Maximum negative pressure 2,700 Pa Filter area 3 x 2.2 m² Chip collection volume 3 x 175 litres Engine power 3.0 kW / 400 V Dimensions (LxWxH). 2486 x 578 x 2115 mm Weight: 139 kg

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: Itodpfoua D Aljx Ah Usr The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Year of construction: 2021, condition: as good as new (ex-display), Overband plate magnet Version in VA 1.4301 tightly welded Isdpfed Evl Dox Ah Ujtr 800 x 500 x 180mm completely welded housing Ring eyelets for suspension

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Isdpfx Ajcqvhwoh Uetr Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: From stock 54634 Bitburg - available immediately -