Gluing rack

Ney VST/RP 2600

Condition: used, Year of construction: 1988, Technical details: x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Lasdpjy S T T Uofx Ab Noh Accerories 2 Chip conveyor, rear side disposal Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" *

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, new KAESER SXC8 screw compressor system (10 bar) available immediately with integrated refrigeration dryer with 215 liter compressed air tank with electrically level-controlled condensate drain with Sigma Control 3 control Year of construction: 2026 Operating hours: 0.5 operating hours Technical data: Volume flow at 10 bar: 0.68 m³ / min Nominal power drive motor: 5.5 kW Electrical supply: 400 V / 3 ph / 50 Hz Dimensions W x D x H in mm: 620 x 980 x 1480 Weight: 300 kg Compressed air tank: 215 liters Compressed air connection: G 3/4 " Sound pressure level: 69 dB (A) Refrigeration dryer pressure dew point: 6 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately. Lajdpfx Abjhhiw No Njh

Condition: excellent (used), - Digital display Heidenhain - Accessories available Travel paths: X – path 280 mm Ledpjv E D Ttofx Ab Nsah Y – path 210 mm Cross table KS 255 D Spindle speeds 135 – 4,500 rpm

Condition: ready for operation (used), Year of construction: 2001, operating hours: 14,336 h, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, total height: 1,473 mm, table load: 1,350 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis HAAS VCE 550 was manufactured in 2001. It features a work spindle with a maximum speed of 7500 rpm, expandable to 10,000 rpm with an optional dual drive. The working area includes dimensions of 508 x 406 x 508 mm, and the table can support up to 1350 kg. Consider the opportunity to buy this HAAS VCE 550 vertical machining centre. Contact us for more information about this machine. Lsdpfx Absx D Eg Uj Neah • Clamping surface: 660 x 356 mm • T-slot width: 14 mm • T-slot spacing: 125 mm • Tool change operations: 321250 timesMachine still under power Additional equipment • Note: 4th axis is available but defective; power unit for AC servo motor for HRT160 must be replaced. Dimensions Machine Depth 2357 mm Technical Specification Through-spindle Coolant Yes

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. Lajdpfx Aexc Rmqsb Noh CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 1999, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg Lodpfx Asv S Diueb Noah

Year of construction: 2011, condition: ready for operation (used), X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible. Lodpfswc A Rkox Ab Neah

Condition: used, 4-axis CNC milling machine Manufacturer: Quick Type: UA-481 New machine Technical data: 380 V-3-phase Working area: 2100 x 3050 x 400 mm 9 kW HSD/HSK-F-63 spindle NC Studio control 10 linear tool changers Double-layer vacuum table with 6 zones Yaskawa servomotor 2 Becker pumps (250 m³/h) NC Studio control with German language Optionally available at an extra charge: - 10-position rotary tool changer on the gantry - 12-position rotary tool changer on the gantry Ledpfozvgmyox Ab Njah - 2 pneumatic pressure rollers for multiple part clamping - Vacuum table with T-slot for manual fixing of components Other configurations available upon request.

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Lajdpfezgvmqox Ab Neh Condition: Very good, used but like new Available immediately from stock.

Condition: used, Year of construction: 1993, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.3 / 1.8 kW Speed: 1400 / 2800 rpm Holder clamp: manual Extraction connection: 100 mm Machine length: 1280 mm Lasdowhuu Espfx Ab Njh Machine width: 960 mm Weight: 300 kg