Drilling and milling machine

Fehlmann Picomax 18 S

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank used for oxygen, nitrogen, argon, and carbon dioxide (CO2). Manufacturer: Harsco (Germany) Year of production: 1991 Vacuum isolation: with certificate. We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you. Hjdpfeyuu Scsx Abuow

Condition: excellent (used), Control: Heidenhain TNC 310 With dividing head Travel X/Y/Z 500/250/160 mm Travel W 480 mm Clamping area (L x W) 885 x 320 mm Permissible table load 250 kg Distance table to spindle nose 0 – 605 mm Feed rate X/Y 1 – 2000 mm/min Feed rate Z 1 – 1200 mm/min Tool quick-change system SF 32 Hodswkrn Ijpfx Abusw Speed range (infinitely variable): 9200 rpm Drive power 5 kW Space required (W x D x H) 1850 x 2550 x 2400 mm

Year of construction: 2020, condition: as good as new (ex-display), electrode diameter 0,5 to 3mm travels 300x400x350mm ) CE-cretification verifies the best possible safty all Machines in over-floor construction Elektrode Ø 0,5-3mm Travel X-Axis 300mm Travel Y-Axis 400mm Hsdpfsf Hmn Aex Abuow Travel Z-Axis 350mm Travel W-Axis 300mm Speed W Axis 30-60mm/min Rapid feed Z-Axis 120mm/min removal rate (max.) 300:1 Table dimension 320x440mm max.generator capacity 30A

Condition: new, Year of construction: 2024, Protec KT 10000 welding positioner Complete set with hand-held remote control 10,000 kg load capacity Diameter of the clamping plate: 2000 mm Height when tilted: up to 1600 mm to the center Height in horizontal position: 1920 mm Speed: continuously adjustable from 0.01 to approximately 0.35 RPM (higher speeds possible) Tilting angle: up to 120° Length: 2800 mm Width: 1920 mm Foot pedal remote control available at an additional cost of €390. Hjdpfxjid Szvj Abuow

Condition: excellent (used), Year of construction: 2020, - Siemens Sinumerik 828D control system - Accessories: Collet chuck Working area Swinging diameter over bed ø250 mm Swinging diameter over cross slide ø85 mm Maximum turning diameter ø85 mm Maximum turning length 225 mm Maximum bar capacity ø25.5 mm Distance between centers (spindle nose – tailstock center) 405 mm Slide travel range Slide travel X 100 mm Slide travel Z 300 mm Main spindle Spindle mounting (centering rim) ø70 h5 Spindle outer diameter at front bearing ø50 mm Main spindle clamping system Hollow cylinder (pneumatic) with draw tube, max. passage ø25.5 mm Max. chuck size ø100 mm Main spindle drive AC motor, power (100%/40% ED) with integrated holding brake for driven tools 3.7 / 5.5 kW Speed range (continuously variable) 60-6300 rpm Max. torque 35 Nm Hjdpfx Abjzcv Rieusw Dimensions Height of the turning axis above the floor 1130 mm Overall height 1820 mm Footprint (without options) 1700 x 1270 mm Weight 1400 kg

Condition: excellent (used), Year of construction: 2012, Technical data: 3-axis machine: X, Y, Z Travel ranges (X/Y/Z): 635 / 510 / 460 mm CNC control: SIEMENS 840D Table size: 790 x 560 mm Max. workpiece weight: 600 kg Tool holder: SK 40 Number of positions in the tool changer: 30 Spindle speed: 20 – 12000 rpm Motor power: 13 kW Dimensions (length x width x height): approx. 3400 x 2450 x 2800 mm Machine weight: approx. 4.3 tons Condition: very good condition, little use Hjdpfx Aszn Ranobuew The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, new KAESER SXC8 screw compressor system (10 bar) available immediately with integrated refrigeration dryer with 215 liter compressed air tank with electrically level-controlled condensate drain with Sigma Control 3 control Year of construction: 2026 Operating hours: 0.5 operating hours Technical data: Volume flow at 10 bar: 0.68 m³ / min Nominal power drive motor: 5.5 kW Electrical supply: 400 V / 3 ph / 50 Hz Dimensions W x D x H in mm: 620 x 980 x 1480 Weight: 300 kg Compressed air tank: 215 liters Compressed air connection: G 3/4 " Sound pressure level: 69 dB (A) Refrigeration dryer pressure dew point: 6 ° C Hsdpfxohhiw Ns Abuow Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: excellent (used), Year of construction: 2010, operating hours: 28,600 h, functionality: fully functional, Machine partially overhauled by Willemin with new geometry. Ready for production. Country of origin: CH (Switzerland) Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 Hodpew T Tk Iefx Abujw X Axis: 450 mm Y Axis: 200 mm Z Axis: 425 mm B Axis: -45° to +100° U Axis: 300 mm Tool magazine: 48 stations PickUp Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motorized spindle: HSK40E, MAX 30,000 rpm Subject to error or omission, technical data provided without obligation.

Condition: like new (used), Hello, we offer here a used Erowa adapter pallet PowerChuck P automatic, pallet was only for demo purposes in use. Condition as new. ER-115304. shipping and inspection possible For questions we are happy to answer. Hedpfxjlz Nb Ne Abuow

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, grinding length: 350 mm, grinding width: 160 mm, type of input current: three-phase, overall weight: 740 kg, rotational speed (max.): 2,900 rpm, power: 1 kW (1.36 HP), input voltage: 200 V, disc diameter: 250 mm, Equipment: documentation/manual, Manufacturer Mitsui MGG CO.LTD Type: MSG-200M Year of manufacture:1991-4 Maximum grinding width: 160 mm Maximum grinding length: 350 mm Maximum table length movement: 360 mm Maximum table length movement: 200 mm Table movement per handwheel revolution: 3 mm /revolution Grinding spindle speed: spindle: 2900 rpm 50 Hz Hjdpfxswvf Hbs Abuew Standard grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speed: 2900 rpm 50 Hz Grinding wheel bore diameter: 31.75 mm Electrical power: 2 HP 1 kW 4P 200V 3 phase Weight, approx. 740 kg