Nikkiso Cosmodyne TGN 3700 Nitrogen Gas Generation Plant with Capacity 200 TPD / 6668 Nm3/hour

NIKKISO COSMODYME TGN 3700

Condition: excellent (used), Year of construction: 1993, CNG Tank Gas Methane Trailer Natural gas 200 Bar Manufacturer: SAMRO Year: 1993 Tare: 6900 kg Djdpfxet D Apto Apwokl We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels.To discuss the possibilities, please contact us by phone or e-mail.

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 Dedpfex U Tgmex Apwokl The unit looks as good as new. The system was only in operation for a short period.

Condition: good (used), Rotary vane vacuum pump oil lubricated Manufacturer: Leybold Type: Trivac D 30 A & S 30 A Voltage: 400V / 50Hz Suction capacity: approx. 30 m³/h Ultimate pressure: approx. 5x10e-3 mbar & 5x10e-2 Status: Refurbished Warranty: 12 months Accessories: Instruction manual Mineral oil filling Quantity: several available Delivery time. from stock Dedpfx Aob Ii E Dspwjkl

Condition: ready for operation (used), functionality: fully functional, mileage: 16,444 km, power: 1,400 kW (1,903.47 HP), first registration: 06/2025, fuel type: diesel, empty load weight: 32,260 kg, maximum load weight: 52,000 kg, overall weight: 52,000 kg, axle configuration: 8x8, next inspection (TÜV): 07/2027, fuel: diesel, color: red, gearing type: automatic, number of gears: 6, emission class: euro5, number of seats: 3, total length: 12,300 mm, total width: 3,000 mm, total height: 4,000 mm, Year of construction: 2015, operating hours: 1,563 h, operation weight: 52,000 kg, Equipment: additional headlights, air conditioning, all wheel drive, full service history, power assisted steering, trailer coupling, truck registration, Two 700 HP VOLVO engines TÜV valid until 07/2027 Dsdpfx Asxy Nb Uopwokl List of special equipment – see photos!

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Dksdpfx Apewk T Uiewol Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: defective spare-parts repository (used), Year of construction: 2014, Kornit Breeze - Suitable for spare parts. Print heads faulty. Questions and additional photos on request. Dedpfx Ajiqn R Repwskl

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Dsdpfx Apoyidvdowskl Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 18089754, laser type: fiber laser, Description: Dksdpfxoxv Dp Ss Apwol High-performance fiber laser from IPG Laser GmbH, manufactured in Germany. The laser is designed for industrial applications such as cutting, welding, or surface processing and is distinguished by high efficiency, stable beam quality, and robust construction. Technical data: Manufacturer: IPG Laser GmbH, Burbach, Germany Model: YLS-4000-S2T Serial number: 18089754 Year of manufacture: September 2018 Rated voltage: 400–460 V AC, 3 phases + PE Frequency: 50 / 60 Hz Full load current: 29.3 A Circuit protection: 32 A / 120 kA CE marking: present

Condition: excellent (used), Year of construction: 2016, 5 axes CNC glass working center for max. glass sizes 4050 x 2300 mm machine fro grinding , milling , drilling , bevelling 0-90° , engraving and sawing max. thikness peripheral wheel : 80 mm electro spindle : 15 Kw electro spindle spindle speed : 12000 rpm 2 x 14 positions rotating tool change store left + right + 8 postions tool change on heads board ( next to the electro spindle ) tool rack iso 40 weight : 7500 Kg Dkedpfxov U Abzs Apwjl

Condition: used, functionality: fully functional, load capacity: 16,000 kg, lifting height: 13,000 mm, fuel type: electric, mast type: telescopic, construction height: 2,000 mm, empty load weight: 20,170 kg, total length: 5,395 mm, drive type: Elektro, construction width: 2,070 mm, Pick & Carry Crane Dkjdpfst Dd U Rox Apwol Mast type: Telescopic Condition: As good as new Technical condition: very good Front tires type: Non Marking Rear tires Type: Non Marking Remote control