Material clamp, material grab, load clamp, carrying clamp, lifting clamp, block tongs, crane grab, l

NORDGREIF 7548

Condition: good (used), Year of construction: 2003, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 4,000 kg, number of slots in tool magazine: 120, controller manufacturer: Heidenhain, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, overall weight: 12,000 kg, table length: 630 mm, table width: 500 mm, controller model: iTNC530, nominal power (apparent): 61 kVA, rapid traverse Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, table load: 4,000 kg, operating hours of spindle: 19,500 h, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned operation, geometrically within new-machine tolerance. The machine can be inspected and measured on site by arrangement. Machine Data: Machine description: Machining centre with pallet storage Rcodpfxorxrkls Am Tjd Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: good Equipment: - Direct linear measurement in X/Y/Z (glass scales) - Chip conveyor - High-pressure coolant system 40 bar (IKZ) - Extraction unit - NC rotary table - Tool magazine, 120 positions - Heidenhain measuring probe - Rotating viewing window - High-pressure coolant 40 bar - Signal lamp - Chip flushing - Operating mode 4 Technical Data: Number of axes: 5-axis Control: Heidenhain iTNC 530 NC rotary table clamping surface: 500 mm x 630 mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travels and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90°/+12° Feed rates and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor spindle: Max. speed: 18,000 rpm Spindle taper: HSK A63 Tool changer: Automatic tool changer: Yes Number of magazine positions: 120 Pallet changer: 5 pallets

Year of construction: 2001, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Rjdpfx Aoc Nkyzjm Tscd Dear Sir or Madam, We offer a 25,000-liter storage tank for storing water and wastewater, as follows: This is a 30 cbm storage tank made of steel. Material: S235JRG2 steel. Includes manufacturer's certificate according to DIN standard and a type plate. The container is cleaned on the inside and insulated with bitumen on the outside. Suitable for both underground and above-ground storage. Container dimensions: Length: approx. 8,390 mm, Diameter: approx. 2,000 mm, Weight: approx. 4,500 kg Shape: cylindrical Equipment: optional For use as a fire water tank, a suction line with a type A quick-coupling connector according to DIN can be offered as an additional option. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees at our company. We also offer cost-effective delivery on request. Inspections of our systems are possible at any time. Additional tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you with our offer? If you have any questions or requests, please feel free to call us; one of our experienced employees will be happy to advise you. General information: All offers are valid ex works Warstein, free of charge for loading. Delivery can be offered at a reasonable additional cost. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as an approved specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 2026, condition: new, 1 piece brand new mobile fresh concrete recycler RECYCLING PLANT FOR THE RECYCLING OF RESIDUAL CONCRETE MREC 15 - MOBILE VERSION Producer: RSM Type: MREC 15 Year of construction: factory new capacity ca. 15 m³/h WAM aggregate separator separating layer 0,3 mm - 1,00 pcs charching hopper - 1,00 pcs overgrounded slurry basin usable capacity 25mc - 1,00 pcs overgrounded intermediate basin usable capacity 2mc - 1,00 pcs agitator (wastewater) with console - 2,00 pcs Submersible slurry pump - 1,00 pcs Submersible pump - 1,00 pcs control unit/board - 1,00 pcs Gallows pipe / flushing pipe for truck mixer - etc. The final painting RAL 9002 Separator are galvanized Price = LIST PRICE Send us your request and we will be happy to provide you with a tailor-made offer (of course with all possible discounts) delivery time: soon delivery are possible Rcedpsfgrfiofx Am Tsd offer and all price are net and ex stock mistakes and/or false representations reserve, subject prior sale

Condition: used, functionality: fully functional, Year of construction: 1997, 2 units Figee overhead crane, 35 tons, with swiveling hook, span approx. 18.60 m, and one unit approx. 21 meters, lifting height 10 meters. Rcodow S D Izjpfx Am Tjd

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 12428 B500-851, Overheadcrane ± 14.170 mm x 25.000 kg Rsdpfx Amov Ip Afs Tocd

Condition: ready for operation (used), Year of construction: 2016, operating hours: 32,524 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, fuel type: gas, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER J616 GS J11 (Complete Package) This offer is for a complete power plant package, comprising cooling system, pumps, lubrication system, electrical system, and exhaust system. Total operating hours (since new): 32,524 h Maintenance: Fully serviced by INNIO Operating hours since 30,000 h major overhaul: 2,524 h Major overhauls performed (20,000 h and 30,000 h): fully completed. At the 30,000 h major service, the following components were replaced with new parts: turbochargers, pistons, connecting rods, cylinder liners, piston rings, as well as main bearings and connecting rod bearings. Technical specifications: Electrical output: 2,745 kW Year of manufacture (YOM): 2016 Fuel: Natural gas Speed: 1,500 rpm Frequency: 50 Hz Alternator: Leroy-Somer Voltage: 6,300 V Scope of supply (included): Rjdpfx Amoytg Rbj Tjcd - Jenbacher genset - Auxiliary control cabinets - DIA.NE XT4 - Gas ramp - Cooling system (high- and low-temperature pumps) - Thermal fluid recovery boiler - Silencer - Protection switchgear - Transformer 6.3 kV / 15 kV, 3,500 kVA (included) - Documentation Availability: Immediately

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 6,700 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,450 kg, total length: 4,510 mm, drive type: Diesel, construction width: 2,000 mm, Rigid telehandler Mast type: Telescopic Technical condition: New Rsdpfxsxntnbj Am Tjcd Front tires: 400/70-20, field tread pattern Rear tires: 400/70-20, field tread pattern

Condition: used, Flame heating device, Roland Groß + Söhne GmbH Ring burner for heating, for weld preheating, casting preheating, etc. Type 1 x 1" Ionization Manufacturer No. ALMA, Year of manufacture 03/20 Connection voltage: 230 volts Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Includes 10 different flame ring nozzles - Flame monitoring, Hans Henning - Ring nozzle, foldable design consisting of 2 halves, inner diameter 310 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 400 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 490 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 500 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 590 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 800 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 990 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, arc length 1500 mm, with hose quick-connect coupling and ignition system, diffuser in the center Rcjdpfodz Spwjx Am Tsd For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and manufacturing of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Heating with gas for thermal spraying.

Condition: new, gearing type: automatic, lifting height: 6,000 mm, Year of construction: 2025, ∗JCB 525-60 New Vehicle∗ - JCB Diesel by Kohler [56 kW/74 HP] - Emission Stage V with DPF - Lifting Height: 6.00 m - Rated Load Capacity: 2,500 kg - 2-Stage Hydrostatic Drive – 20 km/h - Tires: GALAXY BEEFY BABY – 12-16.5 - Comfort Cab (ROPS/FOPS) - Adjustable Steering Wheel - Fully Opening Windows - Heating - Switchable 4-wheel steering (4WS) - Single-lever Servo Control - Q-Fit Boom Frame with Mechanical Quick Coupler - Fork Carriage with 1,200 mm Pallet Forks - LED Work Lights Front/Rear - Armrest - Electronic Park Brake Rcsdpfx Aeyfp E Sem Tjd Ready for immediate use. Many additional attachments available from stock. Appointment for viewing strongly encouraged. On request, we can offer you a leasing or financing proposal from Mercedes-Benz Bank. Mr. Mihm (Tel. ...) will be pleased to assist you. For further information, please visit our website. Subject to errors and prior sale! Power steering, Cab, Rental possible = More information = Engine brand: Diesel Lifting capacity: 2,500 kg Please contact Tobias Ebert for further information.

Condition: new, functionality: fully functional, power: 55.4 kW (75.32 HP), gearing type: automatic, fuel type: diesel, fuel tank capacity: 120 l, color: red, overall weight: 7,145 kg, empty load weight: 7,145 kg, maximum load weight: 3,300 kg, lifting power: 3,300 kg/m, lifting height: 9,070 mm, tire size: 400/80-24, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, mast type: telescopic, Year of construction: 2023, operating hours: 41 h, Equipment: additional headlights, adjustable boom, cabin, pallet forks, soot filter, === KEY SPECIFICATIONS === Year: 2023 Operating hours: 41 h - delivery / test hours only Maximum lifting capacity: 3,300 kg Maximum lifting height: 9.07 m Maximum reach: 6.35 m Maximum reach at full load: 1.65 m Drive: Diesel Transmission: Torque converter / automatic, 4 forward / 4 reverse Four-wheel drive: Yes Steering modes: Front-wheel / 4-wheel / crab steering Stabilizers: No Cabin: Enclosed cabin Heated cabin: Yes Air conditioning: No Fork length: 1,200 mm Tyres: Pneumatic rough-terrain tyres - Alliance 400/80-24 Engine manufacturer: Deutz TD 3.6 L Emission class: Stage V / Tier IV Final Weight: 7,145 kg CE certification: Yes === HIGHLIGHTS === New / unused Manitou MT 933 EASY with only delivery and test hours. 3.3 t maximum lifting capacity and 9.07 m maximum lifting height. 6.35 m maximum reach for versatile handling applications. Closed cab with heating. Deutz Stage V diesel engine with torque converter transmission. 4x4 drive and multiple steering modes for rough-terrain operation. Pallet forks included. CE certified and ready for immediate use. === CONDITION === New / unused condition with only delivery and test hours. Rjdpoy Tm Izofx Am Tjcd Fully checked, maintained and tested by certified professionals. Inspection possible on request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery possible. Price on request (EXW / excl. VAT). The Manitou MT 933 EASY is a reliable fixed telehandler designed for construction, rental and industrial applications. With a 3,300 kg lifting capacity, a maximum lifting height of 9.07 m and a maximum reach of 6.35 m, this machine offers strong performance in a robust and easy-to-operate package. This 2023 unit is in new / unused condition with only 41 delivery and test hours. It is equipped with a Deutz Stage V diesel engine, torque converter transmission, 4x4 drive, multiple steering modes and an enclosed cab without air conditioning. A very clean machine, CE certified and ready for immediate operation. === DELIVERY === Crane loading possible on request for smooth transport handling. Flexible shipping options tailored to your destination and logistics preferences. All transport is professionally handled by the logistics team of Collé Rental & Sales.