Used Ath W42 for sale (3,569)

Year of construction: 2023, condition: as good as new (ex-display), EXHIBIT DEVICE. High quality and robust short stroke lift with hydraulic drive, almost maintenance free. Powerful hydraulic unit (230V / C16A) Very low drive-over height of only approx. 105 mm No electrical limit switches installed in the scissors, protective hose over the hydraulic hoses Mechanical synchronization due to bottom cross connection and double hydraulic lowering lock (no safety catch or compressed air required) High lifting force already from zero point Emergency lowering system for lowering in case of power failure Ideally suited for paint and body stores, repairs, brake and tire services Color anthracite gray Lifting capacity 3 t Lifting height 960 mm Drive-up height 105 mm Length of rails 1.450 - 2.040 mm Rail width 530 mm Drive power 2.2 kW Lifting/lowering time approx. 20 s Operating voltage 230V / C16A Foundation min. C20/25 2,500 x 2,500 x 180 mm Djlhen Armwscdwxskn Can be inspected and tested by appointment.

Year of construction: 2023, condition: as good as new (ex-display), Pneumatically controlled, without electrical components Tool holder for storing impact wrenches and sockets Catch hook to secure the wheels against falling down Lockable castors for locking the wheel holder Dolhcen Atm Isdwxekn Load capacity 65 kg Lifting height 1,2 m Min. height of the room 2,8 m

Year of construction: 2010, condition: used, Technical details: Dkslhju Ic Aijcdwxen range of revolution per miute: 180 U/min voltage: 220/ 50 V/Hz machine weight approx.: 150 kg dimension machine xH: 1,2 x 0,8 x 1,3 m total power requirement: 550 kW Car tire balancing machine The balancing process is automatic with wheel braking. Program selection can be chosen between 11 balancing methods. Microprocessor controlled LED display with digital weight display. Center hole of rim Ø 40 - 154mm Shafts Ø 36mm Measuring speed 120 rpm. Measuring time 5 - 10 sec. Cone sizes: Ø 44 - 63mm; Ø 61 - 79mm; Ø 77 - 114mm; Ø 107 - 154mm Wheel dimension: Rim width: 1,5" - 18" RimØ max. 10" - 24" Wheel Ø max. 890mm Wheel weight max. 65kg *

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Combi line for float and laminated glass cutting Maximum float glass cutting size: 6000 x 3210 mm Dkeljzazfmehcdwxsn Laminated glass cutting bridge length: 3300 mm Line consists of: - double-side movable (3+3) loader ATH-60/30D, year: 1995, - float glass shape cutting table GFB-60/30RE with low-e grinding, year: 2010, - laminated glass cutting table VB-33, year: 2010, - glass transport table with rotation BTA-20/33, year: 2010, - glass breaking table with unloading arms and manual heating BTS-37/33, year: 2010. Layout can be found attached as Tech. data file Very good and clean condition Good working order, tested See video As is Available immediately

Condition: used, Pump + Controller ALCATEL/ADIXEM ATH-1300M + ACT-1300M/1600 M: Dksloylvnyshcdwxen 1 pump type ATH-1300M Maxi pump rotation: 34 000 RPM Flange: DN160/200/250 ISO-K 1 controller type ACT-1300M/1600 M (see technical details on photos) + 1 cable Used, functional, untested equipment

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,000 h, functionality: fully functional, number of drawers: 30, Glass storage system with Lisec loading type ATH Storage racks: 30 positions Dkslhcoyxnfrjdwxjn Storage racks manually movable

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content Dkslouz Hmxohcdwxon - Low maintenance - Flexible use - Customised production

Condition: new, Year of construction: 2026, Drum chipper series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces Dkolhcdwjwbv Erjxsn - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Delhcdwow I R Rnexekn Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: excellent (used), functionality: fully functional, Model: TMBBB662005A Pump Model: TMB10662005A Pump Type: ADIXEN ATH2303M Controller Model: 123744 Controller Type: OBCV4 PROF IP54 Dkjlox Ap I Tehcdwxsn Firmware: Vi 3.01.00 / Vv 1.08.02 / Vm 3.11 Year of Manufacture: 2018/2019 Operating Hours Pump: approx. 25,000 h

Condition: ready for operation (used), Year of construction: 2020, Immediately available ex location: Horizontal surface grinding machine, make Holzmann Model SPM 30 FUM Year of manufacture: 2020 Grinding length: 400 mm Grinding width: 200 mm Table: 600 x 300 mm Automatic feed Magnetic chuck Coolant system Weight: 2 t Offered at a price of EUR 2,250 plus VAT ex location. Dkjlhcjzb Ddzedwxjn

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Type MS-150 Batchmixer Minimal mixing volume 350 dm3 Maximum mixing volume 1500 dm3 Motor 37kW 115 rpm Dksloir E E Eohcdwxen Incl. Sampling unit specicon

Condition: used, diameter 200 mm boring diameter 40 mm - / Deloy S Dt Sehcdwxokn

Condition: used, functionality: fully functional, Machine: Agathon 150 A Tool Grinding Machine Manufacturer: AGATHON (Switzerland) Grinding/Working Data • Grinding wheel diameter: 150 mm • Grinding wheel width: 20 mm • Bore (inner diameter of grinding wheel): 20 mm • Spindle speed: up to approx. 2,500 rpm • Tool clamping range: • Width: approx. 32 mm • Height: approx. 32 mm • Clearance angle adjustment / orthogonal clearance angle: up to approx. 26° Electrical Data • Supply: 3-phase 380 V, 50 Hz • Power: approx. 1.0 HP (~0.7–1.0 kW, depending on source) Dkjloypb T Ajhcdwxjn Mechanical/Dimensional Data • Machine weight: approx. 225 – 300 kg (depending on version/equipment) • Dimensions: • Length: approx. 820 – 850 mm • Width: approx. 564 – 620 mm • Height: approx. 1,215 – 1,200 mm

Year of construction: 2010, condition: used, Technical details: pipe system - processing diameter: 100 mm pipe system - inlet: ansaug Ø 150 und ausblas Ø 130 mm volume flow ventilator - shred: 2600 Nm³/h m³/h filter cartridge type: Filtermatte total power requirement: 2,2 kW weight of the machine approx.: 400 kg Extraction of fibers - Reduction of spillage in transport containers, eg. Big Bags. / YOM approx. 2010 delivery scope: Suction fan Manufacturer Dantherm Filtartion, type T 0,56-224 RD0 D1, air supply quantity 2600 Nm³ / h, suction nozzle Ø 150mm to Ø 100mm, blow-out nozzle Ø 130mm to Ø 100mm Chip separator Two doors with attached air filter, door opening W x H: 1000 x 1960mm, interior space W x D x H: 1200 x 1160 x 1950mm, with filter attachment 1100 x x1100 x 350mm, filter surface 1200 x 1200mm, 2pcs filter (filter mat) 1200 x 600 x 50mm, insertion nozzle dia. Ø 100mm, with clamping bag attachment Optional accessories: -div. clamping bag -div. connecting tubes Ø 100 x 1000mm -div. connecting tubes Ø 100 x 300mm -div. connecting tube Ø 100 x 320mm Dkolhcevc Al Njdwxjn -div. angle connections Ø 100mm -div. bayonet catches for pipe connections i.D. *

Condition: used, Technical details: workpiece length: 600 mm pivoting angle: 100 Grad tilting and declining: re/li:30° Grad grinding wheel dia. (used wheel): 175x35 mm total power requirement: ca. 1,5 kW weight of the machine ca.: ca. 250 kg dimensions L x W x H: L.0;85xB:0;7xB:1;6 m Carbid Metal Tool Grinding Machine (chisel grinding machine) version double grinding disc machine grinding disc = diamond grinding disc with 175x35mm drill cutting edge via tilting lever Dkolhcdwou Ng Hbexsn *

Condition: good (used), Power trowel, concrete trowel, screed trowel, concrete troweling machine, power trowel -Manufacturer: Noggerath, Hand-operated concrete power trowel type G 850 E -Power: 2.4/1.5 kW / 2820/1425 rpm -Plate diameter: 900 mm Delhcdwjhabkysxjkn -Transport dimensions: 1550/1000/H1130 mm -Weight: 88 kg

Condition: excellent (used), functionality: fully functional, three-jaw chuck diameter: 160 mm, Three-jaw chuck eccentric – clamping chuck 1 piece used, very well-maintained Horvath Fischer eccentric clamping chuck (three-jaw chuck) with a diameter of 160 mm, maximum adjustable eccentricity: 25 mm, chuck mounting cylindrical with a diameter of 150 mm, complete with chuck key and one set of hardened stepped jaws as well as the installation and operation manual for the Horvath eccentric chuck, all likely in the original wooden box (Hahn & Kolb). Year of manufacture unknown. From our own inventory. Eccentric lathe chuck for clamping workpieces on a lathe. Dolhcsg Umb Eodwxjkn Price €195 net ex stock, plus packaging costs. All technical data subject to errors and omissions. We sell exclusively to countries of the European Community.

Condition: excellent (used), Year of construction: 2017, first registration: 06/2017, fuel type: diesel, color: other, fuel: diesel, Beautiful Original NL Mathieu MC210 Sweeper, directly from a Dutch municipality = More information = Technical condition: very good Visual appearance: very good Damages: none Registration number: T-68-DHG = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Djley R Uphehcdwxjkn Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: excellent (used), Slate shears TS NS1 in case - Attachments for cordless screwdriver Djloy Sayzjhcdwxjkn - As new

Condition: new, I offer a new worm gear motor from the renowned German company MSF-Vathauer Antriebstechnik GmbH & Co. KG. This device is designed for industrial applications, automation, conveyors, feeders, and various types of production machines. Technical data: • Manufacturer: MSF-Vathauer Antriebstechnik GmbH & Co. KG • Motor type: KAE63B-4 • Gearbox: worm gear • Power: 0.18 kW • Voltage: 230/400 V • Frequency: 50 Hz • Rotational speed: 1360 rpm • Protection class: IP55 • Insulation class: F • Operating mode: S1 (continuous operation) Dkslozbddushcdwxen • Power factor cos φ: 0.70 • Weight: approx. 8 kg • Robust aluminum worm gear Included: • MSF-Vathauer KAE63B-4 worm gear motor • Manufacturer's operating manual • Mounting elements as shown in the pictures • Original shipping protection Applications: • Conveyors and transport systems • Production lines • Packaging machines • Feeders and dispensers • Industrial automation • Technological drives Condition: • New, in-stock item • Never used

Condition: new, MSF-Vathauer KAE63A-4 – NEW Djlezbdbgshcdwxekn

Condition: used, Year of construction: 2020, Industrial high-pressure cleaner, professional grade – 500 bar / 15 l/min. Suitable for heavy-duty cleaning tasks: cleaning of building structures, facade cleaning, tank and container cleaning, industrial plants, machine cleaning, rust removal. Complete equipment on a frame with hose set, gun, and lance. The unit comes from the inventory of a professional user and has been used appropriately – manufactured in 2020, making it relatively new for industrial equipment of this class. Technical data: - Model: HHPC 500/15 XS - Year of manufacture: 2020 - Serial No.: 06201096 - Voltage: 400 V / 50 Hz - Power: 15 kW - Working pressure: 500 bar - Delivery rate: 15 l/min Dolhcjzabuhjdwxokn - Weight: 150 kg - Connection: CEE plug - Equipment: High-pressure hose, gun, lance Collection / transport: Self-collection with a van / trailer. Loading with a forklift / 2 people is possible. Shipping via a freight forwarder on a pallet is possible by arrangement.

Condition: good (used), FCR Athena flatgrinding machine offered. Type: PB Magnetbed: 150 x 250 mm Speed: 2860 RPM Dolhcdohvmriowxokn Engine power: 2,5 HP Included coolant pump Dimensions: 80x72x174 cm LxWxH For more information call us or send an e-mail.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Lathe - cycle controled | Brand: FAT-HACO / Type: TUR 800 MN / Year of construction: 2001, General overhaul in 2009, Replacement in 2010 The TUR MN lathe - cycle controled is a combination of a conventional and a CNC lathe. The TUR MN is a production machine for complex parts as a single piece or in small quantities with high precision. The machine can be inspected in the factory under power by appointment. Condition: Fully functional / ready for use. The general overhaul in 2009 included the following work: - Machine completely dismantled, cleaned and remounted, - Maintenance of the gear box, - Machine bed have been grinded, - Upper bed has been scraped by hands, - Measuring and adjusting the headstock - Measuring and adjusting the plan and longitudinal slide Replacement in 2010: Ball screw renewed. TECHNICAL SPECIFICATIONS: - Control: SIEMENS SINUMERIK 840D ManualTurn - Swing diameter over bed max.: 800 mm - Swing diameter over support max.: 480 mm - Distance between centers (turning length)max.: 4.000 mm - Centre height: 250 mm Headstock: - Spindle cone (metric cone): 150 - Bore through the spindle: 140 mm - Spindle speed: 5 - 1.800 rpm - Spindle speed I: 5 -360 rpm at N = const.: 90 - 360 rpm - Spindle speed II: 360 - 1.800 rpm at N = const.: 360 - 1.800 rpm Feeds: Type of the feed drives - servo drives: - Gradient of the leading spindle (Z/X): 10 mm - Range of the longitudinal feeds (Z/X): 0 - 6.000 mm/min - Feed force of the longitudinal feed (Z) max.: 15.000 N - Feed force of the crossfeed (X) max.: 10.000 N - Adjustment range of the cross slide (X): 480 mm - Range of the bedway: 544 mm Cross slide: - Width of the cross slide: 330 mm Tailstock: - Permitted workpiece weight max.: 3 tons - Tailstock quill - morse taper: 6 MT - Diameter of the tailstock quill: 125 mm - Tailstock sleeve stroke manuell: 280 mm Drive motor feed rate for X/Z-axis: - Nominal torque Mn = 15,5 Nm - Nominal speed Nn = 3.000 rpm Total power requirement: 39,5 kW Machine weight approx.: 9,3 tons Dimensions of the machine: Length: 8.000 mm (incl. chip conveyor which can be dismantled, then it`s approx. 1.400 mm shorter) Width: 2.500 mm Height: 2.200 mm SPECIFICATIONS / ACCESSORIES: - 1 steady rest, Ø: 30 - 340 mm Dkslhcdwezamkzjxon - Documentation Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -