Container for compressed air

OKS Air receiver tank

Condition: good (used), Year of construction: 2013, machine/vehicle number: 581851, OKS Air receiver tank Serial: 581851 2013, 300l air receiver tank, working 11Bar, Kdsdpfx Ajqqhmkeh Eew

Condition: excellent (used), Year of construction: 2008, operating hours: 87,000 h, functionality: fully functional, overall weight: 775 kg, total length: 1,770 mm, total width: 900 mm, total height: 1,530 mm, fuel type: electric, volume flow: 190 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, noise level: 68 dB, type of cooling: air, Equipment: refrigerant dryer, Manufacturer: Kaeser ASD 32T screw compressor + refrigerant dryer serviced throughout!!! complete documentation Year of construction: 2008 Nominal pressure: 8 bar air flow: 3.16 m3/min air flow: 189.6 /hour operating hours: Refrigeration dryer: ABT60 Compressed air connection: G 1¼ Ksdji E H Ikepfx Ah Esdw Voltage: 400V/3PH, 36A Power: 18.5 kW engine speed: 2945/min Ambient temperature: 3 / 45°C machine weight: 745 machine dimensions: 1,770 x 900 x 1,530 mm

Condition: used, Year of construction: 2009, functionality: fully functional, Info: 9m Chamber Length x 3m (approx) Dia, Touch Screen Operators Control Panel, Rated Current 1100A, Control Voltage 24v, 230v/50hz, Service Voltage 400v, 2 x Honeywell Digital temp Controllers, Honeywell Digital Pressure Controller, Honeywell Kdsdpswintkjfx Ah Eew

Year of construction: 1995, condition: used, Demag crane rail KBK II length 7000 mm with ceiling mounting + electric chain hoist 125 kg but there is also the possibility for 250 kg Ksdsh Dwhrjpfx Ah Eodw

Condition: good (used), Crane system with two fixed (l= ~7.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder. Kjdpfx Aeg Dgdvsh Ejdw

Condition: new, Compressive force: 30 to Piston stroke: 150 mm table width: 185 mm passage (E): 535 mm passage (F): 140 mm distance cylinder - table (F1): 40 mm distance cylinder - table (F2): 1100 mm cylinder movable (M): 200 mm width (A): 800 mm Kdjdpfxeb Ibdls Ah Eew depth (B): 700 mm Height 1 (C):1770 mm height 2 (D): 1800 mm Weight: approx. 168 kg Equipment: - Two adjustable speeds for piston feed by means of hydraulic pump. - Powerful workshop presses for craftsmen and repair shops - Optimal price-performance ratio due to rational design - The standard foot pedal leaves the hands free for the workpiece - Increased range of application due to the optionally available pressure mandrel set (10 pcs.). - Pressure cylinder with integrated return spring for piston retraction - Welded steel frame for heavy duty and high stability - Versatile use due to pressure cylinder that can be moved to the left and right

Year of construction: 2010, condition: ready for operation (used), Max. material width: 1700mm, max. roll diameter: 800mm, inner sleeve diameter: 152mm, max. roll weight: 750kg, stack length: 250-2200mm, connected load: 12kVA, length: 8397mm, with drawings, circuit diagrams, EC declaration of conformity, operating instructions, risk assessment, spare parts lists. Kjdpfjkkiwxox Ah Eodw

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Kdsdpfxjxk U Ems Ah Eow Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: used, Year of construction: 2006, operating hours: 89,000 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, type of cooling: air, Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Kodpfot A Uyuex Ah Eodw Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg

Condition: new, Bernardo workshop press 20 WK FH Pro Technical specifications Pressure force 20 to Piston stroke 185 mm Table width 170 mm Passage (S) 510 mm Through (F) 130 mm Distance from cylinder - table (F1) 40 mm Distance from cylinder - table (F2) 965 mm Cylinder movable (M) 175 mm Width (A) 730 mm Kjdpfx Ahsd Du T Re Ejdw (B) depth 560 mm 1 (C) height 1525 mm Height 1630 mm 2 (D) Weight approx. 112 kg Properties • Fitted with sliding left and right cylinders • To align, presses, bending, assembling gears, disks, etc. • Fitted with foot pedal and hydraulic • hand pump for delivering piston • Standard Edition Prism to shaft alignment • Standard equipment with automatic piston return through integrated return spring • Height-adjustable table with locking bolts • Large dimensioned pressure gauge to read pressure • including two-stage hydraulic pump • Sturdy construction with welded steel frame