Pallet

Palomat Pallet Magazine

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM Lsdpjphl Ecsfx Abvjri X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium Lodpfxog Ewwrj Abveri -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: reconditioned (used), Year of construction: 1987, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 2 Aktiv Year of manufacture: 1987 – overhauled, newly painted with new machine electrics RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-11579 Milling head type: 2271 Ledpjx A Eddjfx Abvjri Milling head no.: 300-3606 with warranty Geometric acceptance with inspection report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 660 x 380 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, hand-operated - Coolant system - Operating manual - used, as seen -

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: C2401317M, warranty duration: 12 months, For sale: automatic industrial pallet stretch wrapper. The machine is brand new, unused, and has never been unpacked from its original packaging. Available immediately, as it comes from a cancelled project. This is an excellent opportunity for companies looking for an efficient and reliable automation solution. Technical specifications of the wrapper are provided in the attached PDF. Main images are for reference only. The unit is sold packaged on the manufacturer’s pallet. Installation support can be offered. Ljdpfsw Nn Tcjx Abvori

Condition: new, Year of construction: 2025, saw blade diameter: 480 mm, High-performance Everising fully automatic circular saw (NEW) incl. magazine. For the use of thin-cutting circular saw blades (carbide / cermet) Basic data: - Application range: 70-160mm round - Drive: 15 kW - Blade dimensions: 480 x 2.7 x 2.25 - Saw blade speed: 30 - 125 rpm - Weight: 5 tons - Dimension: 3100 x 7530mm (incl. magazine) Features: - Automatic loading magazine 6 meters (for round material 6 meters) - Emulsion cooling option - Siemens control system - Electromagnetic brake system - Direct-driven saw spindle for very high cutting performance Lrodjq Ul Rkopfx Abvoi - Ball screw spindle incl. servomotors for precise feed - Heavy-duty design - Minimum quantity lubrication - Inverter-controlled stepless cutting speed - Fully encapsulated, low-noise - Automatic cut and remnant sorting - etc. Other models available: P-50 ILA: Cutting range 8-50mm P-75 ILA: Cutting range 10-75mm P-100 ILA: Cutting range 15-100mm P-150 ILA: Cutting range 70-150mm P-160 ILA: Cutting range 70-160mm P-180 ILA: Cutting range 70-180mm P-230 ILA: Cutting range 70-230mm

Condition: used, mileage: 8,528 km, power: 316 kW (429.64 HP), first registration: 10/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2026, color: blue, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Like-new and exceptionally well-maintained MAN TGS 18.430 4x2 BL with Meiller skip loader AK 12 MT and radio remote control, only 8,530 km, one owner, with extended warranty until 09/2027. Payload up to 10.5 t, automatic transmission, PriTarder, Ringfeder trailer coupling with air connections, rear air suspension, air conditioning, reversing camera, navigation system, and much more. Lrsdpfoyf Svyjx Abvsi MAN Extended Warranty: Truck ATG and ATG+ until 21.09.2027 or 480,000 KM Cab NN medium-length with rear wall window Wheelbase 3,600 mm Euro 6 E engine with 430 HP and 2,200 Nm Drive 4x2 18,000 kg permitted gross vehicle weight 21,000 kg technically permissible gross vehicle weight Payload 7,559 kg at 18,000 kg permitted gross vehicle weight Payload 10,559 kg at 21,000 kg technically permissible gross vehicle weight Meiller skip loader type AK 12 MT with radio remote control Dual hydraulic outriggers MAN TipMatic 12.26 DD automatic gearbox MAN Idle Speed Driving gearbox function MAN PriTarder MAN EasyStart hill hold MAN EVBec EBS with ABS, ASR, and ESP Disc brakes on front and rear axles Front axle leaf-sprung, rear axle air-suspended Front axle 9,200 kg, rear axle 13,000 kg Permissible front axle load 8,000 kg Permissible rear axle load 11,500 kg, technical rear axle load 13,000 kg HY axle ratio i = 2.85 Stabilizers and shock absorbers on front and rear axles Rear axle differential lock Emergency brake assistant EBA Lane departure warning LDW Full brake assistant Automatic climate control Cruise control Reversing camera Central storage box in cab Ringfeder trailer coupling type RF 40/G 150 A with air connections Additional Doumatik connection Permissible gross train weight 40,000 kg Technically possible gross train weight 44,000 kg Towing capacity with continuous braking system 26,470 kg Towing capacity for SDAH/ZANH 16,946 kg Sun visor Multifunction steering wheel Large plastic toolbox on driver’s side 2 work lights behind cab 2 air horns on cab roof LED light package 300-litre tank Electrically heated and adjustable exterior mirrors, electric windows Air-sprung driver's comfort seat with lumbar support, shoulder adjustment, and heating MAN EasyControl panel, 4 functions, operable from outside when door open MAN Mediasystem Advanced Navigation 7-inch MAN Sound System German vehicle from first owner Like-new and exceptionally well-maintained condition Next UVV inspection for skip loader: 02.10.2026 Net price plus 19% VAT. Attractive financing available on request. All information subject to change. Errors and prior sale excepted. Internal vehicle number: 2592

Year of construction: 2006, condition: good (used), machine/vehicle number: 3206, HEAT TREATMENT FURNACES CMS ITALIA model DMH 7, MFG: 2006, serial no. 3206 - installed power 15Kw - supply voltage 220V Ljdjldfgpepfx Abvsri - maximum temperature 1000 °C; - useful width 450 mm - useful height 250 mm - room depth 800 mm - current absorption 39.5 A - frequency 50 Hz Price Euro 4.300 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2009, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system, cartridge filter unit, cartridge filter -Manufacturer: HPS, Filter system cartridge filter series ECO -Type: Aerodust Eco 1/1 - 3000 U -Motor power: 2.2 kW -Volume flow rate: 3000 m³/h -Filter cleaning: pneumatic -Opening: Ø 250 mm / 200 x 200 mm -Dimensions: 1120/1040/H2680 mm Lodpfxjyapxue Abvjri -Transport dimensions: 2680/1040/H1120 mm -Weight: 579 kg

Condition: ready for operation (used), Year of construction: 2014, Volume flow: 6300Bm³/h, total pressure difference: 40mbar, motor power: 11kW, speed: 3000rpm, machine weight: 400kg. Components: Dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection is possible. Expected to be available from April 2025. Lrodpfovzbhasx Abvsi

Condition: ready for operation (used), Year of construction: 2018, Volume flow: 12500Bm³/h, total pressure difference: 40mbar, motor power: 22kW, speed: 3000rpm, machine weight: 1275kg. Components: Dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection is possible. Expected to be available from April 2025. Lrsdovzbg Nspfx Abvji