Used joinery machines for sale (50)

Condition: new, Year of construction: 2023, aking only minutes to set up, the Sedgwick TESH is easy to use and accurate in operation. Work is positioned on the rolling table against a depth stop and a fence, and is secured by a cam action clamp. Its end is then passed between two horizontally mounted cutterheads which machine the top and bottom cheeks of the tenon. The tenon width is set by raising or lowering the top motor, and its position on the timber by raising/lowering the two motors in tandem. Variations in shoulder length are set using a multi-position depth stop, and staggered tenons are achieved by simple handwheel adjustment of the top motor. Stepped tenons, splayed tenons, scribed tenons, double tenons, and multiple bridles are all possible on this versatile machine. Combinations of 90 degree and bevelled cutting discs with appropriate spacers can also be fitted to produce interleaved joints as used in sash window construction. The Sedgwick TE/TESH is designed and built to withstand continuous production use. Its cast iron base, column and slideways provide a rigid and durable mainframe assembly, and the 2.2Kw motors supply ample power. The generously proportioned cast iron sliding table is mounted on bearing equipped hardened steel rollers for minimum wear, and cutterhead slide movements are easily adjusted on dovetail slides for ease of maintenance. The TE/TESH offers all of these safety features as standard: Automatic braking Starters with thermal overload, no volt release protection and lock off emergency stop switch. High performance lightweight cutter blocks with chip limiting devices Large diameter dust extraction outlets One piece front cutter guard Front & rear table guards Machine Specification : Ex College A1 Condition - Unused TIMBER CAPACITY 150 x 300mm MAXIMUM TENON LENGTH 150mm TABLE SIZE mm 765 x 340 (765×300 useful) TABLE WORKING HEIGHT 890mm TABLE QUADRANT ADJUSTMENT +/- 0-60 degrees HORIZONTAL TENONING HEADS CUTTERBLOCKS 150 x 150 x 30mm MAX TOOLING DIAMETER 155mm (BOTTOM) 200mm (TOP) VERTICAL ADJUSTMENT OF BOTTOM CUTTERBLOCK -2mm / + 77mm Nlsdpfx Aoy Efzqjdtsa VERTICAL ADJUSTMENT OF TOP CUTTERBLOCK +4mm / + 150mm HORIZONTAL ADJUSTMENT OF TOP CUTTERBLOCK -50mm /+ 20mm DUST EXTRACTION OUTLETS 2 x 150mm MOTOR RATING 2 x 2.2 Kw (S6 40%) FULL LOAD CURRENT 4.75 AMPS STARTING CURRENT 35 AMPS VERTICAL SPINDLE SHAFT DIAMETER 40mm EFFECTIVE LENGTH OF SHAFT 205mm VERTICAL MOVEMENT 112mm HORIZONTAL MOVEMENT 150mm MAXIMUM TOOLING DIAMETER 350mm SPINDLE SPEED 4000 RPM MOTOR RATING 5.5Kw (S1) FULL LOAD CURRENT 11.5 AMPS STARTING CURRENT 69 AMPS ELECTRICAL VOLTAGE / FREQUENCY 3 PHASE + EARTH; 400/230 V – 50/60 Hz REQUIRED FUSE SIZE 25A/ph REQUIRED CABLE SIZE 4mm2

Condition: used, Year of construction: 2004, Weight: 8.000 kg Price: On request - Details: Nlodpfx Aoyy Nnqsdtoa - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Fuse [A]: 63 - Power [kW]: 15.0 - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector Nlsdewuppwopfx Adtoa 5-arm wood rack Safety devices and protective guards

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, working length: 130,000 mm, Hundegger CNC Joinery Line Year of manufacture: 2016 Equipment: Base machine ROBOT DRIVE 450 ROBOT unit for 6-axis machining 16-position tool magazine Hundegger production software Cambium Safety devices: fencing and enclosures Automatic infeed with 13 m buffer function AQF 7 tracks Line laser for component referencing Nljdpfoy Apn Nox Adtja Horizontal unit 2.2 kW Extended outfeed conveyor for up to 13 m timber length Timber stacking supports after outfeed Central lubrication Basic tool set Air blast device for chip removal Basic tool set for ROBOT HSK63E Very well maintained

Condition: used, Year of construction: 2004, functionality: fully functional, Good working condition. Machine purchased new in 2004. Rack guide replaced in 2023. Complete set of wagon wheels replaced in 2023. FU5 axis head replaced in 2022 (value €18,000). Stock of spare parts included. Njdpfx Aoy Ey H Uodtela

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1779, The K1 was rebuilt in 2020 and equipped with the latest safety features. It is currently dismantled, stored covered outdoors, and can be loaded immediately. Nsdpfx Aox Ehmasdtola

Condition: good (used), Year of construction: 1994, Chalet notching machine with 10-meter Tiger stop pusher, equipped with: 1 horizontal milling unit on top, 1 horizontal milling unit below, 1 front/rear milling unit, 1 horizontal drilling unit diameter 16 mm, 1 automatic Tiger stop of 10 meters, year: 2001, effective working length: 9.20 m. Nodpfx Adsxbn N Tjtola

Condition: used, Year of construction: 2005, functionality: fully functional, I am offering a rare Hundegger K3 for sale. The machine is operational and can be inspected by appointment. Nljdpfjyvplnox Adtja The K3 was manufactured in 2005 and comes with the following equipment: - Infeed and transfer cross conveyor - Offcut holder in front of the saw - Underslung swivel crosscut saw - 5-axis universal milling unit (UF5) - Combination support for vertically operating tools 2 reinforced vertical drilling units - Combination support for horizontally operating tools Slotting unit 1 standard drilling unit 1 drilling unit swiveling at 45 degrees - Fully automatic hydraulic beam turning station - Marking unit on stop side - Marking unit on operator side - Underside marking device - Additional monitor in the outfeed area - Deposit table for short components - Top feed roller The machine must be dismantled by the buyer. Pickup only from company premises.

Condition: good (used), Year of construction: 2021, functionality: fully functional, We are offering this HUNDEGGER SC3-200 machining centre, year 2021, in good general condition, for sale due to equipment renewal. PC to be replaced in 2025. Annual servicing carried out by Hundegger. - 1 angle saw with tilting axis - 1 automatic loading system - 1 support for short workpieces - 1 lateral infeed conveyor (2.2 x 7.25 m), 5 arms for raw timber up to 10 m Njdey A R I Ropfx Adtjla - 1 cut-off scrap conveyor inside the SC3 - 1 outfeed table with 6 rails - 1 additional arm for the infeed conveyor - 1 combined holder for vertical tools - 1 vertical drilling unit 2.2 kW - 1 vertical milling unit 5.5 kW - 1 revolver cutter - 1 rear HP inkjet marking system (150x300 dpi) - 1 4S inkjet system with cartridge heater - 1 automatic small parts ejector including conveyor belt - 1 remote maintenance via modem - 1 safety plate right side - 1 belt conveyor to the left, behind the machine, length 6.0 m - 1 internal piping for micro-dust extraction - 1 steel support under SpeedCut – 140 mm A video of the machine in operation can be provided upon request. Available: July – August 2026 Dismantling, transport, and reassembly are the responsibility of the buyer (dismantling and reassembly by the manufacturer is possible). If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, working width: 1,100 mm, We are offering this refurbished twin-belt calibrating machine SbF by ING STEFANI WK - 558, year of manufacture 1997, working width 110 cm. Nlsdjyxn Dbopfx Adtea If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2025, functionality: fully functional, Infeed line for a cross-longitudinal planer. Material feeder unit before the planer. Nlodpfxoykrvqj Adtea Inclined outfeed receiver with cross-transfer function for components.

Condition: ready for operation (used), Year of construction: 1999, cutting height (max.): 300 mm, cutting width (max.): 400 mm, saw blade diameter: 710 mm, working width: 400 mm, Schmidler SAB 4 Timber Framing Machine, Year 1999 Machining Capacity: 300x400 mm - Swiveling undertable crosscut saw Nljdpfx Adoyvp Tljtoa Saw blade diameter: 710 mm Rotation angle: 360 degrees Tilt: 0–65 degrees - Offcut ejector - Vertical marking pencil - Universal 4-axis milling unit, 40mm finger cutter, dovetail, 100x350mm cutter - Horizontal drilling unit - Vertical drilling unit Price: €16,000 net (excl. VAT) If you have any questions or need more information, feel free to send us a message or call us.

Condition: used, Year of construction: 1997, cutting height (max.): 300 mm, cutting width (max.): 450 mm, saw blade diameter: 800 mm, working width: 450 mm, We are offering this used Hundegger K1-A joinery line, model Hundegger K1, year of manufacture 1997. Type: K1-A Machine number: 1647 Year: 1997 Equipment includes: - Infeed cross conveyor with flat chain belts - Under-table tilting cross-cut saw, blade diameter 800mm - 4-axis universal milling unit with finger cutter and dovetail cutter Combined support for vertically-operating tools: - Drilling unit - Vertical finger milling unit Combined support for horizontally-operating tools: - Drilling unit - Drilling unit - Slotting unit - Rear marker Nlodpoynwx Ejfx Adtsa - Automatic turnover device - Various milling heads Component dimensions from 20x60mm up to 300x450mm. Feel free to contact us with any questions!

Condition: used, Year of construction: 2003, functionality: fully functional, working width: 4,400 mm, Used CNC joinery machine by HUNDEGGER, model PBA, year of manufacture 2003. It can process element sizes up to 4.40 m width, 16.50 m length, and 240 mm thickness. Pre-cutting of elements is carried out with the 5-axis chainsaw and re-planed with a roller milling cutter. All processing units, except for the 5-axis circular saw retrofitted at the end of 2010, can handle panel thicknesses up to 240 mm. The 5-axis circular saw can cut continuously up to approximately 240 mm panel thickness at standard feed rates. Equipment: - 5-axis chainsaw 15 kW - 5-axis circular saw 11 kW - Vertical milling unit 22 kW - Vertical milling unit 22 kW - Vertical drilling unit 4 kW - Gantry width: 6960 mm - 18 m guide rail - Processing table height: 700 mm - Frequency converter for 35 kW Nlsdpfx Asylxfusdtja - Without processing table – it can be self-constructed from cross-laminated timber Dismantling and collection to be arranged by the buyer.

Condition: excellent (used), Year of construction: 2008, Hundegger K2i 625x300mm under-table crosscut saw, 11KW saw blade 800mm, universal 5-axis milling unit, combination support for vertically operating tools, combination support for horizontally operating tools, drilling unit 2.2KW (1x vertical 18mm x 460mm and 2x horizontal 7mm/8mm x 650mm). Fully automatic hydraulic beam turning station, K2i transport and positioning device, electronic control system, 6-arm outfeed table, vertical finger joint cutter 5.5 KW, longitudinal and cross groove cutter 15.5–30mm, marking and labeling devices (bottom and rear), refined (chrome-plated) support surfaces, left and right height-adjustable safety guard plate, saw blade 900mm. The system is ready for demonstration. Availability: Autumn 2026. Nodpfx Adeww Nuxjtela

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power of the milling unit: 11 W, saw blade diameter: 450 mm, working length: 12,000 mm, working width: 3,500 mm, Essetre Multiwall XS with 5-axis milling unit, 11 kW, 1,000-18,000 rpm, liquid-cooled 22 kW inverter. Working length 12,000 mm, working width 3,500 mm, working height 400 mm. 3 pcs. clamp-nailing units incl. Beck wood nailing unit. Double-sided automatic retractable reference stops. 8-position rotary tool changer. Pneumatic system with 12 clamping elements. Saw unit 450 mm. Chainsaw unit. Built-in NC-controlled butterfly turning table up to 4,000 kg. Projection laser to project the wall onto the machine table. Extraction system with floor duct. The machine is connected and ready for demonstration. Available at short notice. Nlodpfsyq S Itsx Adtja

Condition: excellent (used), functionality: fully functional, Essetre beam processing line model Techno PM with 5 axes Spindle 12 kW liquid-cooled, RPM 1,000–18,000 Njdpfx Adjw S Naijtela 2 automatic tool changers with 9 positions each HSK 63F Processing height 800 mm Processing width 400 mm Machine is connected and ready for demonstration

Condition: used, Year of construction: 1999, functionality: fully functional, Schmidler S4 Joinery Line - 4-strand transverse infeed conveyor (inclined upwards) - Infeed roller conveyor - Edge turning device integrated in the infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cross-cut saw Saw blade diameter: 710 mm Swivel angle: 360 degrees Tilt angle: 0–65 degrees - Waste wood pusher - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger-joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Vertical profiling mill (lower position) for internal radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color display Maximum workpiece dimensions: Height: 300 mm Width: 400 mm Length: approx. 12,000 mm 4-Side Planer – Schmidler Minimum workpiece dimensions: Height: 30 mm Nlsdpfx Aoya Dc Iodtea Width: 50 mm Feed speed: 9/18 m Planer shaft diameter = 140 mm 4-sided chamfering unit Infeed roller conveyor Outfeed roller conveyor with push-off ruler and storage rods Machine in good used condition, fully operational and in use. The machine can be inspected by appointment. Available for sale immediately or by arrangement.

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 24,000 kg, I am selling a Hundegger K2i carpentry centre from 2008. The machine is in very good condition and well equipped, including: - 13 m infeed table - Beam clamps with chain drive - 5-axis sawing unit with new 800 mm saw blade Njdpoxx T Rdefx Adtsla - 5-axis milling unit with finger cutter, new 60 mm cutter, and new dovetail cutter - Horizontal and vertical drilling - Additional end milling unit for rafter tails from underneath - Slotting attachment with a complete set of 8 and 10 mm chains Note: The slotting attachment is rare equipment, used for the production of trusses with concealed plates. The machine is in excellent technical condition, regularly serviced, and has been in continuous operation. We are selling due to purchase of a much newer unit. Availability: immediate. We offer disassembly and installation for €10,000.

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,500 kg, SCM M2 18 kW tracked multi-saw Specifications: - condition - used - manufacturer - SCM - model - M2 - track width - 220 mm - max working height - 120 mm - power of main engine 25 HP ( 18 kW ) - discs diameter - 340 mm - spindle fi 40 mm, bushings fi 70 mm - speed control of the caterpillar in the range 6-48 m/min - caterpillar track in very good condition, not worn out - working table 164 x 90 cm - suction nozzle fi 180 mm - weight - about 1500 kg - overall dimensions - 220 x 160 x 140 cm ( W x L x H ) Additional information: - the machine is in good technical condition, ready for immediate use - the pictures show the actual state of the object of sale - possibility to turn on and check the machine on site. - the price given in the auction does not include VAT and transportation costs Additional photos and video in the link below: Nodpfx Adjt Rivyotola drive.google.com/drive/folders/1u41GyV7Exyaj8dfI1m5fPvTzSnMzhRqd ?usp=sharing

Condition: good (used), Technical Description of the Lumber Repackaging Line Purpose of the equipment: The line is designed for automated repackaging of lumber, offering the following operations: Nedpeywaxzjfx Adtjla - Dismantling of kiln-dried (stickered) packs - Formation of transport (shipping) packs without stickers - Reverse repackaging of transport packs into kiln-dried packs with stickers Functional features of the line: - Automatic feeding of lumber packs - Layer-by-layer dismantling of packs with separation of stickers - Accumulation and formation of new packs according to specified parameters - Automatic placement of stickers during the formation of kiln-dried packs - Adjustable pack dimensions (width, height, length) - Integration with sorting and lumber conveying systems - Capability for continuous operation Processed material: - Softwood and hardwood lumber - Thickness: 16–80 mm - Width: 75–250 mm - Length: 3,000–6,000 mm.

Condition: good (used), Year of construction: 2005, functionality: fully functional, feed length X-axis: 22,000 mm, total length: 22,000 mm, saw blade diameter: 760 mm, working length: 22,000 mm, working width: 650 mm, Description: For sale: K2 650mm CNC machining centre, year 2005, 5-axis machine, ideal for industrial carpentry, timber framing, and woodworking applications. Machine fully serviced, operational, and in regular use. Key Features: • 5 axes • Automatic workpiece turnover system • Infeed 22 meters / Outfeed 20 meters • Integrated crosscut saw with pneumatic end-of-chain clamping • Saw blade Ø760 mm (360° rotation) • Universal cutterhead Ø350 mm – thickness 80 mm • Universal cutterhead Ø350 mm – thickness 45 mm (additional) • Universal cutterhead Ø350 mm – thickness 100 mm (additional) • Universal cutterhead / router Ø40 mm • Universal cutterhead / dovetail milling (cutter Ø45/60 mm) • Vertical router (cutter Ø8 to 30 mm) • Inclined horizontal drilling unit (0 – 45° angle), max drill length 650 mm • Horizontal drilling unit, max drill length 650 mm • Vertical drilling unit, max drill length 460 mm Condition & Services: Nodpfxoyimi Hj Adtela • Comprehensive overhaul completed in June 2024 • Industrial cabinet PC Pyramid with Windows 10 installed 18/11/2025 (invoice available) • New operator console as of 04/2022 • Machine in daily working condition • Option for dismantling and reassembly by manufacturer – estimated cost: €25,000 (includes installation and hotline support) If you have questions or require further information, please do not hesitate to contact us by message or phone.

Condition: excellent (used), Year of construction: 2018, The line consists of: - WEINMANN OPTIMAT WTZ 120/12 L assembly table - WEINMANN WMS 150 - WEINMANN OPTIMAT WTW 110/12 N/L loading/unloading table - Schmalz Jumbo Ergo 140 flexible hose vacuum lifter The WMS150 multifunction bridge is a CNC machine for the automated processing of timber structural elements (walls, roofs, and floors). Machine dimensions: - Length (X-axis): approx. 3,000 mm - Width (Y-axis): approx. 6,200 mm - Height (Z-axis): approx. 3,000 mm - Workpiece width: approx. 3,200 mm - Main spindle: 18.5 kW with automatic tool changer Njdpjytyuaofx Adtela - FLEX5 indexing system Tool set for WMS tool changer consisting of: - 3-flute universal roughing cutter - Drilling unit - Saw unit - Marker with ballpoint pen technology HSK - Saw unit NL 55 mm HSK63F - Saw unit NL 105 mm HSK63F Gluing system - Holder for PUR gluing unit - PUR one-component adhesive unit (1K) with 6 application nozzles Fastening and assembly unit - Automatic height adjustment for fastening device - Holder for ADUNOX screwdriving unit - ADUNOX-TRS screwdriving unit Bridge extension Tool holder beam with integrated Y-axis Sliding guide with U-profile for the bridge Increased X-axis drive dynamics Energy supply system via cable drag chain End position monitoring for handling systems Wheel and sliding block lock, right side of portal Homatic powerControl V2.0 control system Remote control for WMS150 with potentiometer Mobile extraction unit 3.0 kW Electrical cabinet cooling unit Less than 1,000 operating hours

Condition: ready for operation (used), functionality: fully functional, Automatic hydraulic press with GANG–NAILS connectors for trusses. Hydraulic press for pressing metal connectors and manufacturing trusses and other structural elements. Machine dimensions: 5.0 x 1.30 m – Left roller table 12.95 x 3.9 m – Right flat table 12.00 x 3.90 m – Pressing area 400 x 130 x height 20 cm – Total length 26.30 m x depth 3.90 m (tables) and 5.0 m (press). Includes a large batch of cartons of GANG–NAILS connectors. Nodpfexdiucjx Adtela The right table is used for assembly and preparation of trusses and for distributing GN plates. Then, stepwise feed and clamping in the press. Finished elements are received on the left roller table. Manual removal of the item. In good technical condition.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 450 mm, Equipment: safety light barrier, TECHNICAL DETAILS Working width: 450 mm (limited processing up to 520 mm possible) EQUIPMENT - Safety light barrier - Saw - Universal milling unit with roller cutter - Dovetail cutter - Finger joint cutter Nodpeyfhi Nsfx Adtjla - Drilling units: 1x horizontal + 2x vertical - Slotting device - Marker on stop side - Automatic beam turning station - Wood length is now processed in the feed up to 16m - Control computer with EKP program included