Equipment

Perkins PERKINS

Condition: used, Year of construction: 2023, operating hours: 5 h, fuel type: diesel, color: blue, power: 10 kW (13.60 HP), mileage: 5 km, Equipment: additional headlights, all wheel drive, cabin, rubber tracks, standard shovel, Gekko Network KG in Gersthofen - your supplier for vehicles of all kinds. You can reach us by phone, email or in person. Model CX15CP Technical parameters: Weight kg 1520 Bucket capacity m³ 0.025 Bucket width mm 380 Boom length mm 1560 Arm length mm 793 Tank capacity l 20 Hydraulic accumulator capacity l 13 Hydraulic system : Oil pump model DHP0010 Maximum oil pump pressure MPa 17 Hydraulic pump flow rate l/min 28.5 Performance: Rotation speed ipm 10 Travel speed km/h Gradeability 25 % Ground pressure kN 25 Bucket breakout force kN 9.6 Boom impact force kN 8.5 Engine: PERKINS Rated power kW / rpm 10.3 / 2400 / 14.7 / 2200 Maximum torque N - m 51.8 / 51.8 Number of cylinders 3/3 Air cooling Working range: max. digging radius mm 3225 max. digging depth mm 1650 max. digging height mm 2740 max. unloading height mm 1970 max. height of raised dozer blade mm 170 max. depth of lowered dozer blade mm 220 Boom swing angle 50 ° left / 70 ° right Bdjdpfx Asklwvcjczok Dimensions: Wheelbase mm 950 Rail length mm 1290 Distance mm 405 Counterweight swivel radius mm 850 Width mm 1055 Track width mm 180 Rail height 320 mm Length mm 3160 Height (without / with roof) mm 1570/2200 Please note that some of the vehicles in our range may be in our external warehouse and are not directly available for viewing on site. In any case, please contact us in advance atOur complete offer is available on request. Construction machinery, Other construction machinery Year of construction: 2021 Operating hours: 8 Environmental sticker: -- All-wheel drive equipment Are you looking for other construction machinery or equipment? Please do not hesitate to contact us.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: HE-PG378-B/964/140917 - kogeneracja, overall weight: 26,100 kg, fuel type: gas, output current: 682 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, continuous power (apparent): 500 kVA, total length: 12,190 mm, total width: 3,000 mm, total height: 3,300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, Gas / Biogas Power Generator Module / CHP HORUS type: HE-PG378-B equipped with a turbocharged PERKINS 4006-23TRS2 engine (module);\nYear of manufacture: 2023 (as stated on the HORUS-ENERGIA Sp. z o.o. manufacturer's nameplate);\nAt the Investor’s request and for an additional fee, the module can undergo a commissioning inspection, and comes with warranty and service provided by the manufacturer – HORUS ENERGIA Sp. z o.o. – for one year or up to 8,000 operating hours, depending on the Investor’s preference.\nRated electrical output: 378 kW (410 kW thermal output);\nModule manufacturer: HORUS-ENERGIA Sp. z o.o.;\nService history: (brand new unit);\nEngine hours: 0 (brand new);\nCurrently located in central Poland;\nThe generator set is installed in an enlarged 40 ft sound-attenuated container;\nContainer divided into three sections: control room, engine room, and a section for parallel operation with a second power source;\nEquipment: standard installation for combined power and heat generation + MUZG controller (Gas Mixing Supply System) + provisions for operation with a second power source (i.e., shaft for mechanical power extraction/input),\nFuel: natural gas / LNG (after regasification), biogas (from landfill, wastewater treatment plants, agricultural, or industrial biogas plants), mine gas (methane drainage), (Methane content: 30 Vol.% < CH4 < 100 Vol.% - methane content ranging from above 30% to below 100% by volume.);\nPerkins – technical data sheet available via the link below;\nManual + DTR (Technical and Operational Documentation) + further documentation (technical data) available upon request after email confirmation of purchase interest;\nPhotos of the genset + nameplate: available via the link below;\nGas / Biogas Generator Set / CHP unit is ideal for use as a primary or backup power source, for island operation setups, or in various types of businesses, such as CHP plants, heat plants, agricultural/landfill/waste/industrial biogas plants (e.g. wastewater treatment plants), mines extracting methane for energy use, industrial facilities requiring compressed air supply (working in tandem with compressor systems), or as a power generator for the electricity grid, in dairies, breweries, sugar factories, or applications requiring fuel flexibility. Bodpfjw Ihudsx Aczodk