Open gap eccentric presses

Pressix decoiling / straightening / press 800 x 1.1 mm

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0540/98, Manufacturing number: 0540/98. Year of manufacture: 1998 ,. Capacity: 400 tons. Stroke length: 300 mm. Stroke: 10-40 / min. Slide adjustment 300 mm. Csdpfx Ajicbbzoh Hegn Installation height: 700 mm. The table measures 1600 x 1300 mm Net weight: 45 tons. Gable opening: 1600 mm. Exterior dimensions 2 x 3 x 6 meters. Control system MEAB. Coil feeder / straightener iRON RNE 50B / 11. Decoiler iRON SA6000 max 700 mm.

Year of construction: 1999, condition: good (used), Very nice high 10-t speed Japanese press with fixed stroke of 15 mm, rates from 0 to 2500 strokes per minute Codsim Iv Djpfx Ah Hogn

Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm stroke 1100 mm Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Die cushion area in table 4300 x 1830 mm Die cushion pressure in ram 120 t Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Codpfevuucqox Ah Hsgn Power capacity 450,0 kW Weight 400,0 t Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Height below floor 4,0 m year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way as is where is, WITHOUT dismantling, WITHOUT loading

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, ram adjustment: 100 mm, table length: 600 mm, installation height: 1,900 mm, stroke adjustment: 130 mm, overall weight: 19,000 kg, pressing force: 160 t, height adjustment type: electric, power: 11 kW (14.96 HP), punching force: 160 t, input voltage: 200 V, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Cgodpfxou D Dhxe Ah Hsn Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: excellent (used), Year of construction: 2007, Pressing force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Lateral clearance: 740 mm Die height: 550 mm (ram down, adjustment up) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Features: • Siemens + Beckhoff control • 8-fold slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safeties + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamping on table and ram • Hydraulic roll blocks for tool change Cjdov T Anljpfx Ah Hogn Coil line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Coil width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion by wedge segments • Rear support disc and 3 attachable limiting arms at front • Hydraulically actuated and driven hold-down roller, laterally adjustable by handwheel • Load carriage (stationary, decoiler moves hydraulically), lifting height 770 mm with 4 limiting bars Straightening machine Type: RMBMZ 50.600 UF Coil width: 40 - 600 mm Coil thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Features: • Rollers hardened, ground and hard chromed • Drive of lower straightening rollers and feed rollers via gear transmission • Motorized roller frame adjustment, precision 1/100 mm, settings storable • Upper rollers ventable by 100 mm • Feed roller pneumatically ventable • Lateral strip guidance at entry with handwheel and leadscrew • Outlet roller basket and loop bridge • Loop control via ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roller Roll feed Coil width: max. 600 mm Features: • Rollers hardened, ground, and chromed • Driven by gear motor • Upper roller hydraulically ventable • Height adjustment hydraulic • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feeder • Safety fence around the entire line • Decoiler and straightener on common base frame • Various spare rollers for straightener The complete line can still be inspected under power at the current owner's site!

Condition: good (used), Year of construction: 2001, Table 950x650 mm, ram 610x410 mm, stroke 0-140 mm Cgjdpfxoqgcaao Ah Hen

Condition: excellent (used), Year of construction: 2001, Manufacturer YAMADA DOBY Model Alfa-45H Year 2001 Condition Used Warehouse number 0357 Structure Double column Used press Thrust: 45 tons Cgodpfx Aewiifush Hen Thrust points n° 2 Slide stroke 30 mm. Number of strokes/min 150 -1000 Slide adjustment 50 mm. Mold light at BDC 260 mm. Mold holder plate size 700 x 500 mm. Slide size 700 x 360 mm. Lateral passage in the shoulder 220 mm. Main motor power 15 kw

Condition: used, Year of construction: 2001, SanGiacomo Press Codpfx Aox Ex Dxjh Hsgn Model: T250 DM Pressing force: 2,500 kN Stroke adjustment: 21 - 230 mm Ram adjustment: 120 mm Stroke rate: up to 75 strokes/min Ram surface: 2,300 x 1,090 mm Table surface: 2,300 x 1,090 mm Dimensions: 3,550 x 1,910 x 5,200 mm (LxWxH) Machine weight: 42,000 kg

Condition: used, IMV Punching Press Type: DM 125 Year of manufacture: 2016 Pressing force: 1,250 tons Stroke adjustment: 250 - 500 mm Ram adjustment: 300 mm Strokes per minute: 5-35 Installation height: 1,150 mm Table area: 4,500 x 1,800 mm Ram area: 4,500 x 2,000 mm Cjdpfx Ahsxnxlxs Hegn

Condition: used, 25/11/2025 Knuckle-joint press VORONEZH 2500 ton for sale. The press is in good working condition Manufacturer: VORONEZH TMP Year: 1984 Model and configuration: KB8044 (504.003.844) / 2500 ton Nominal force: 2500 tons Ram stroke: 190 mm Stroke rate: 14–20 strokes per minute Shut height: 560 mm Ram adjustment: 15 mm Cjdpfxsxbtclj Ah Hjgn Table dimensions: 1530 x 1530 mm Main motor: 77 kW, 380 V Overall dimensions: 4920 x 3340 x 5980 mm Weight: 125 tons