Shredders Rapid GK 8045-KU 1986

Rapid

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm Nwedpfx Aezln D Eekcei MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Pneumatic line pressure at 70 °C: Approx. 15 bar EQUIPMENT Automatic screw feeder Arrangement of the units: On a wheel, which enables machining at different angles.

Condition: new, Year of construction: 2024, Chopper knife 40 x 40 concave Knife for Weima, large size ... Nsdpfobxu Dhex Akcswi Suitable for almost all common shredders/granulators Available from stock in Bitburg Subject to prior sale

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Nedpfx Akozlnxiecewi Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

Year of construction: 2003, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: 1528 Nwjdszn Iqkepfx Akcji -Drive motor: 2.2 kW -Inlet cross-section: 280 x 180 mm -Outlet: 280 x 180 mm -Sieve: Hole size 6 mm -Quantity: 1 cutting mill available -Dimensions: 600/550/H1140 mm -Weight: 183 kg

Condition: new, Year of construction: 2026, Consisting of a bale shredder for large round bales, type MHB, and a straw shredder, type MHZ. 1) Bale shredder MHB: Special price from €24,975 net (manufacturing time approx. 15 weeks) Suitable for round or rectangular bales. Includes a frequency inverter (FU) - this regulates the speed of the scraper bed. The bales are placed on the scraper bed and the feed of the shredder is activated. The shredder's tines tear the straw from the bale and fling it into the hopper. Ideally, the combination of a bale shredder and a straw shredder offers the best solution. Nwodeb Nulhspfx Akcei Technical data, bale shredder: Capacity: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the sieve size used in the straw mill, kW number of the straw mill). Without a straw mill, the bale shredder can process up to a maximum of 900 kg/h of straw. Maximum size of rectangular bales: 2400x1200x800 mm (L x W x H) Shredder motor: 5.5 kW, 380 Volts Scraper bed feed: 0.75 kW, 380 Volts Dimensions: 3750x1730x2460 mm (L x W x H) Weight: 400 kg 2) Straw shredder MHZ 600 - 11/15 kW; immediately available Special price from €6,995 net Additional cost for the even larger straw shredder (18.5 kW): €2,750 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting blades Sieve with interchangeable inserts Optional (10, 12, 15) 22, 30, 45 mm hole size With star-delta switch, overload protection and 8 m power cord, ready for connection Discharge spout: 160 mm Throwing distance approx. 12 m Dimensions approx. 1600 x 1020 x 1360 mm (L x W x H) Weight approx. 240 kg --- Options at extra cost: Feed auger: + €970 net Cyclone separator (mounting by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve *makes the material pressure-free + €5,750 net Control system: from €1,620 net Special shredder extension, 3 m *other sizes can be calculated + €9,750 net Briquetting press MPP 180 S; little used demonstration unit 70 mm briquette - up to a maximum of 100 kg/h from €39,700 net * larger machines on request --- Description: The muetek bale shredder has been developed for shredding round and rectangular bales of hay and straw. The shredder attached to the bale shredder shreds straw from all types of cereals, hay, corn and miscanthus. The muetek machines of the MHZ / MHB series are characterized by a robust construction and solid design. The muetek bale shredders of the MHB series are equipped with a chain conveyor, on which the straw bale is placed with a front loader. The support is adjustable depending on the type of bale. The chain conveyor presses the bale against the shredder rotor, and the feed speed is adjustable. The shredder rotor is equipped with several teeth, which tear open the straw bale. The straw separated from the bale is ejected. --- In principle, the machines work for dry source materials: - Straw - Hay --- Shredding hemp only works with a special shredder Additional cost approx. €9,720 net *depending on the design. Shredding hemp does not work with the straw mill. Requirements for the source material: Moisture content max. 12%

Year of construction: 2007, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: G15035-SOLO Nwedpfx Akjzn H Syocsi -Drive motor: 2.2 kW -Inlet cross-section: 300 x 245 mm -Outlet: 360 x 200 mm -Sieve: Hole size 5 mm -Quantity: 1 cutting mill available -Dimensions: 630/590/H1095 mm -Weight: 158 kg

Condition: ready for operation (used), Year of construction: 1999, Engine: 7.5 kW Nsdpfx Akezab Tdscewi Warranty: 6 months

Condition: new, Slittering machine for the efficient shredding of waste rolls. Features: - Automatic safety interlock - Knife guard - Emergency stop pull cord - Siemens PLC Technical data: Knife length: 1500 mm Cutting channel opening: 1200 mm Nodpfxsn Hyxlo Akcswi Motor power: 7.5 kW Cutting force: 30 tons Made to order Price and further information upon request. We will be happy to provide you with a non-binding quotation.

Year of construction: 1989, condition: excellent (used), functionality: fully functional, Manufacturer: RAPID Type: GK 4535-KU Dimensions of the rotor/grinding chamber: 450 x 350 mm Number of rotor blades: 3 Number of stator blades: 2 Nwodpfxoxz D R Ts Akcoi Power of the drive motor: 18.5 kW The technical condition is very good!!! Equipment: Plastic discharge chute + silo PRICE REDUCTION FROM 6500 TO 5950 EUR!!!

Condition: used, Year of construction: 2024, Cutting length: 3700 mm Drive: 2 x 3.0 kW motor 2 saw blades, diameter 600 mm / Z = 138 New saw feed: hydropneumatically prepared for installation of an electronic control system Aggregate on the left is fixed, on the right is movable R700i database for max. 400 basic profiles, 1000 color profiles USB and network connection / remote maintenance Cutting angle: 20° - 90° - 135° Integrated memory TFT color touchscreen Aggregate adjustment: stepless motorized aggregate adjustment 20° - 135° including section clamp (1x per aggregate) Indication of swivel range: swivels outwards Clamping device: vertical clamping device with mounting plate for holding profile-related parts Feed from the right: movable roller conveyor, support length 2900 mm, width 250 mm Stops: socket Extraction Software stop for overlengths Nwjdpfx Akjzhpbdscji Stop for short parts, pneumatically extendable Label printer: RAPID-specific label printer RED-300, installed in the control panel R700 sealing clamping device Control cabinet, freestanding R700 waste conveyor Cutting length 3.7 m Inclined conveyor 1000 mm horizontal x 2500 mm vertical Storage location: customer

Condition: new, Year of construction: 2025, Motor output: 7.5 kW - Cutting force: 30 tons Cutting channel designed for: - Max. roll length: 1500 mm - Max. roll diameter: 1250 mm - Machine weight: approx. 3800 kg - Tank capacity: approx. 110 liters - Hand protection grille in the area of the control panel and on the opposite side - Knife locking mechanism - Straight splitter table design - Documentation: 2 copies in German (1 printed, 1 on USB) - Color: RAL 5012 - light blue Protective grille/knife bar: RAL 1028 - melon yellow Nwodpfx Aeltmi Sjkcsi Made to order Price and further information available upon request.

Condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, Table saw, Saw unit: swivels 45° -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height 75 mm with saw blade Ø 250 mm (max. approx. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 850/850/H1310 mm -Weight: 176 kg Nedpsyvpm Sjfx Akcowi

Condition: good (used), Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW Rapid, face driver Nsdpfx Aji I Hc Aekcewi -Type: MS4 / Rapid4 -Recording: MK4 -Quantity: 4 pieces available -Price: per piece -Front dimension: Ø 46 mm

Condition: new, Year of construction: 2025, Motor power: 7.5 kW - Cutting force: 30 tons Cutting channel designed for: - Max. roll length: 1500 mm - Max. roll diameter: 850 mm - Machine weight: approx. 3500 kg - Tank capacity: approx. 110 liters - Hand protection grid in the area of the control panel and on the opposite side - Knife locking mechanism - Straight splitting table design - Documentation: 2 copies in German (1 printed, 1 on CD) - Color: RAL 5012 - light blue - Protective grid/knife beam: RAL 1028 - melon yellow Nedpfxsgl Adze Akcjwi Machine in stock and immediately available Price and further information upon request.

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm Nodpfogzc Iyox Akcowi -Total weight: 240 kg