Panel van

RENAULT Kangoo Rapid extra 1,5DCI AC Leiterklappe

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Lredpfxsu Rni Hs Aazjt Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Lsdpfx Aoya Dagjazort Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2017, operating hours: 8,760 h, Vehicle description TAKEUCHI TB 2150 tracked excavator Year 2017 acc. Counter 8.760 hours 85 KW 15.075 KG Lodpougf U Asfx Aazsrt - hydr. quick coupler - Backhoe bucket - Slope bucket NEW - hydr. swivel arm - hydr. quick coupler - hydr. dozer blade - electr. tank pump - ready for immediate use - 270cm width Sales price: 54.900,-- net also favorable delivery possible!

Condition: good (used), Item: D-1746-APV-Baker-N35-15m3 Exchanger APV BAKER PLATE EXCHANGER Stainless Steel Exchanger Pasteur with 2 section, Capacity 2 x 15 m3, working press 6 Bar, 47,9 m2, Lrsdpfsimmb Sox Aazjt temperature 120 C,

Condition: new, pressure 100 t stroke 400 mm 1010 mm 295 mm Heads 175x115 mm feed down 7,6 mm/sec Lrjdeyv N Ngepfx Aazet feed up 13,4 mm/sec total power requirement 4,0 kW weight of the machine ca. 1000 kg dimensions of the machine ca. 1600x850x2450 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,274 h, load capacity: 8,000 kg, lifting height: 26,600 mm, fuel type: diesel, construction height: 3,120 mm, empty load weight: 22,500 kg, total length: 8,250 mm, drive type: Diesel, arm reach: 23,100 mm, construction width: 2,530 mm, Rotating telescopic handler Ledpfxsvgi A No Aazert Speed class: 40 Technical condition: very good Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service, and repair – you can get everything you need from a single source. We also offer lease-purchase options, financing, and the purchase of used machines. Our team will be happy to provide you with competent and personal advice. Just call us or send us a message via SMS or WhatsApp. The Magni RTH 8.27 is a powerful rotating telescopic loader for assembly, lifting, and material handling on construction sites and in industrial applications. With a lifting height of up to 26.6 m, a lifting capacity of 8,000 kg, an endlessly rotating upper carriage, and all-wheel drive, the machine is ideal for heavy loads, working at heights, and operating on difficult terrain. High reach and off-road capability. Robust, powerful, and easy to operate. You can find more information and submit a non-binding inquiry on our website – Safe working at any height.

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch Lredpfsuagxpox Aazet - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; Lredpfep Stgnox Aazet - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 2,000 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 1 mm, back gauge adjustment: manual, overall weight: 540 kg, total length: 2,400 mm, total width: 850 mm, total height: 1,175 mm, Finger bending machine with segmented top clamp PNEUMATIC CYLINDER!!! Including manual backstop Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of the fingers ----- 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm Max. bending angle ----- 0 - 135 Lrodpfx Ajga T Dpoazst Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: used, functionality: fully functional, Year of construction: 2017, For sale: CNC bending machine CIDAN FORMA 40 Multifold Condition: Used. Operating hours: 6568 hours. Manufacturer: CIDAN Machinery AB (Sweden) Model: CIDAN FORMA0 40 High-end CNC-controlled sheet metal bending machine designed for the precise and fast production of various shaped profiles. Technical specifications: Year of manufacture: 2017.11 Total weight: 5660 kg Control: CNC with PROLINK Operating hours: 6568 h Table height adjustment: from 0 to 36 mm Mechanical bend compensation adjustment (Crowning system) Working length: 4100 mm Lsdpjy U I I Eofx Aazsrt Max. bending thickness: 2.5 mm Equipment: Automatic rear support – flexible U-shape model (4.5 m x 1.2 m x 1.74 m) Swiveling upper beam – COMBI MULTIFOLD type Segmented tools for lower and bending beams with SBG 15 table CNC control with PROLINK graphical user interface (intuitive, easy programming) Quick change system for tools High accuracy and repeatability Application: This machine is designed for bending, forming and profiling sheet metal. Ideal for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. If you have any further questions, we will be happy to answer them.