Hydraulic unit 3 kW/1420 rpm

Rexroth Hydronorma PV2V3-20/25R1MC 40 A1

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Tip height: 215 mm Fgjdpocir Anefx Adaoi Center width: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Weight approx. 1680 kg Equipment including Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: new, Year of construction: 2025, This machine meets expectations where accuracy is key, perfect for school and industrial training workshops. Drilling, milling and turning done taking only a small amount of space. 2 x autofeed- longitudinal and cross. Technical data Swing over bed 320 mm Maximum working length 750 mm Swing after bridge removal 210 mm Spindle bore 38 mm Spindle taper MK5 Tool holder size 16x16 Transverse travel 160 mm Longitudinal travel 100 mm Metric thread 17 Metric thread pitch 0.5–4 mm Inch thread Fedpfx Ajricx Sodasgi 20 Inch thread pitch 9–40 1/n'' Longitudinal feed 0.135–1.80 mm/turn Cross feed 0.025–0.34 mm/turn Tailstock quill extension 70 mm Tailstock quill taper MT3 Number of spindle speeds 6 Spindle speed 75–1900 rpm Motor power 1.1 kW, 230V 50 Hz Drilling and milling machine Spindle bore MK3 Number of spindle speeds 4 Spindle speed 240–2700 rpm Maximum drilling diameter 16 mm Swivel head 360° Motor power 370 W Dimensions 1500×635×1200 Weight 390 kg Standard equipment - stand, - 2 dead centres, - set of gears, - set of soft jaws, - drilling chuck 16mm, - 3-jaw lathe chuck, - tools

Year of construction: 1993, condition: good (used), Clamping carriage Braun WES fully hydraulic with auxiliary carriage with tracks Track width: 79 cm good condition - immediately available Fsdpsfuh Dysfx Adasgi Visit also my other advertisements. I am looking forward to your inquiry.

Condition: used, Year of construction: 2003, Bordstørrelse 600 x 300 mm X/Y/Z movements 480/360/270 mm Fedpeu Sn Uxjfx Adajgi Table load 250 kg Spindle taper BT 30 Spindle speeds 10-10000 rpm Tool changer w/21 stations Equipped with: 27 tool holders (no cutting tools) Can be supplied with automatic cell - against extra cost

Condition: used, Year of construction: 1956, machine/vehicle number: 17179, Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Meuser, master and feed spindle lathe type M3A -Turning length: 1400 mm -Swivel Ø over bed: 550 mm -Rotating Ø without bed: 800 mm -Rotating Ø over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm Fgsdeh Uuzyjpfx Adaji -Faceplate: 500 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK5 -Dimensions: 2770/1070/H1310 mm -Weight: kg

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Features include Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates Fsdpfxjcirnis Adasgi

Condition: good (used), Center height: 205 mm Center distance: 1500 mm Swing diameter: over bed 410 mm Spindle bore: 47 mm Spindle mount: size 6 Tailstock taper: 4 MK Spindle speeds: 28 - 1250 rpm Fjdov Du Ixspfx Adasgi Feeds: longitudinal/transverse 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space required: 2800 x 1100 x 1600 mm Weight: 1330 kg

Year of construction: 1987, condition: good (used), machine/vehicle number: 3409, Lg.No. 17381 Technical data: - Drilling capacity 60 mm - throat 1600 mm - Drilling spindle holder MK 5 - drilling spindle stroke 390 mm Fedpfon D E Rpox Adaegi - spindle speed, 20 steps 20 - 2000 rpm - right- left rotation - feed, 12 steps 0,056 - 2,5 mm/rev - drive 400 V / 12,8 kW - Clamping of boom and drilling unit electromechanical - Distance machined machine bed - drilling spindle sleeve - min. approx. 900 mm - max. approx. 1600 mm - usable machine bed with 4 T-slots 950 x 1700 mm - coolant device - cube table - space requirement approx. W 2600 x H 3000 x D 1000 mm - weight approx. 4500 kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: HL, hydraulic unit for hydraulic punch Fjdpfof Tdt Isx Adaogi -Type: DK52 1-6-250P-391K -Motor: Junginger 5.5 kW/1455 rpm -Nominal pressure: bar -Liter output: l/min -Pressure display: up to 250 bar -Pressure accumulator: Hydac 2.5 liters -Hydraulic tank/filter/valves: see pictures -Dimensions: 540/630/H1210 mm -Weight: 198 kg

Condition: new, Year of construction: 2025, Fully equipped lathe with a lead screw and a feed shaft. Machine features Precise design 2 axes digital readout Large spindle bore – Ø 36 mm Heavily ribbed prism bed made of gray iron Inductively hardened and precisely ground bed guides Ensured accuracy of spindle tip better than 0.009 mm Accuracy of lathe chuck speed better than 0.04 mm Left/right switch on the control panel With a lead screw for threading or automatic longitudinal feed Lead screw and feed shafts in two sintered bearings Automatic longitudinal and transverse feeds Lead screw and feed shaft guard Knobs by the slides with adjustable 0.04/0.02 precise scaling Included by default set of change gears for threading Emergency stop button Smooth and efficient drive of excellent spindle speed adjustment VARIO model equipped with an inverter for smooth spindle speed adjustment! Digital speed indicator By default comes with a solid steel base Technical data Swing over bed 310 mm Swing over cross slide 190 mm Centre width 900 mm Bed width 180 mm Spindle bore 38 mm Spindle tip MK5 Spindle speed 80 – 2000 rpm (adjustment in 2 ranges) Metric thread (18) 0.2 – 3.5 mm/turn Inch thread (21) 56 – 8 TPI Longitudinal feed 0.085 – 0.832 mm/turn Transverse feed 0.01 – 0.1 mm/turn Maximum upper slide travel 65 mm Maximum transverse support travel 210 mm Maximum longitudinal support travel 650 mm Tailstock spindle travel 100 mm Tailstock quill diameter 38 mm Tailstock quill taper MK3 Motor power 1.5 kW / 230V Dimensions 1520×675×1320 mm Weight Fgedpfx Ajric Idjdasi 295 kg