Trailer hitch

Rockinger 260G150

Condition: used, Year of construction: 2007, Liebherr A924b-957 litronic TIER 3 OVERHAULED Year of manufacture: 2007 Liebherr engine 127kW Tier 3 / EPA 8 solid tyres 10.00-20 Gumasol Dozer blade Industrial mono boom 6.80m Industrial angled stick 5m Operator's cab hydraulically elevating Cabin with front protection grille Radio system Air-suspended driver's seat Positioning swing brake Lift cylinder damping Lift cylinder with pipe rupture protection Njdpfsyt Idpox Anfowf Overload warning device Generator drive mounting kit DRIVELINE WARRANTY

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Nwjdpfswnx Uisx Anfef Weight: Approximately 2,500 kg

Condition: used, No. 10028 Cable granulation plant FRS BK 60 Used According to our customer, the machine is fully functional and can be inspected and tested on site Cable granulating system for up to approx. 1000 kg of cable per hour (according to our customer) Motor and blades were renewed in 2025 Rotor dimensions 610 x 500 mm 14 blades Motor power 45 kW Incl. magnetic conveyor belt Cylinder size 400 x 120 mm Motor power 1.5 kW Incl. sieve with two outlets Motor power 0.35 kW Installation dimensions approx. 7000 x 6000 mm LW Transport dimensions approx. 6000 x 2400 x 2600 mm LWH Weight approx. 6000 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Nodoxwdndepfx Anfswf Dismantling, transport and loading by us optionally possible Errors in the description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), Technical condition: good Visual appearance: good Price: On request Please contact Ferdinand Pater for more information Nwjdpfx Anjt Dlursfof

Condition: reconditioned (used), Year of construction: 1998, The redom SE200 used separation table is fully operational, can be seen and is available on site in Poland. In 2019, the machine underwent a thorough renovation. The Redom separation table works on 3 basic principles, eccentric speed, airflow and the angle of inclination of the table. From the market-leading Redoma company, now part of Eldan's recycling machine company, the SE200 has a throughput of up to 2000 kg/p/h. Nwjdpfxjin Ndwo Anfof Suitable for all types of dry electric granulated, the SE200 table used produces 99.5% pure copper product. Simple to set up and use, the Redom SE200 has an eccentric 3 kW power unit and an 11 kW blower motor. Redoma SE200 Dimensions: Length: 2.7m Width: 1.8m Height: 2.2m Weight: 1,700Kg

Condition: excellent (used), loading space volume: 54 m³, Year of construction: 2002, Hüffermann LL101s/Roll-off Container 54 cbm/8 Available • Manufacturer: Hüffermann • Model: LL101s • Year of manufacture: 2002 • Unladen weight: 3,900 kg • Permissible total weight: 15,000 kg • Nominal capacity: 54 cbm • Internal dimensions: 7.4 m x 2.42 m x 2.95 m • External dimensions: 7.52 m x 2.55 m x 3.185 m • Floor: 3 mm S235 sheet quality • Sides: 3 mm S235 sheet quality Nwsdpfswaap Ejx Anfjf • Rear side: 3 mm S235 sheet quality • Doors: two-part • Exterior color: RAL 1226

Condition: reconditioned (used), Year of construction: 2013, operating hours: 18,819 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,085 mm, filling opening length: 2,815 mm, bale length: 1,200 mm, bale width: 100 mm, bale height: 800 mm, bale weight: 400 kg, total width: 3,140 mm, total height: 2,900 mm, total length: 8,840 mm, overall weight: 7,380 kg, transport height: 2,900 mm, power: 9 kW (12.24 HP), year of last overhaul: 2023, transport width: 2,400 mm, transport length: 5,650 mm, Good day, We hereby offer you a used baler from the manufacturer Strautmann, type BaleTainer. Nodpfx Aot H Rgfsnfjwf The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Strautmann Type BaleTainer Year of construction 2013 Operating hours 18,819 hours Number of bales pressed 7,019 pieces Pressing force main press 60 tonnes Drive power 9.2 kW Machine weight press 7.38 tonnes The baler was partially overhauled. The piston rods and seal sets of the two main hydraulic cylinders were replaced and general maintenance work such as oil and filter changes etc. was carried out. Finally, after the overhaul work, the machine was tested. The press is equipped with a hydraulic tilting device for loading in order to empty lattice box containers on a truck ramp. For example, the machine can be positioned with the tilting device on a truck ramp. There, the employees can roll the material to the tipping device with a mesh trolley and then have it tipped hydraulically into the baler. The machine can also be loaded from the side via the large feed/storage container using a forklift truck or wheel loader. Conveyor belt loading would certainly also be feasible. The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Year of construction: 2019, condition: used, For sale is a used cable granulation plant. Technical Data: Model: QJF-600 Voltage: 380V Frequency: 52.37 Hz Total Power: 53 kW Circuit Breaker: 125A Weight: approx. 3200 kg Dimensions: 3.5m x 2.0m x 2.8m Cable Diameter: 0.3–20 mm (dry cables only!) Capacity: 150–200 kg/h (cable/hour) Njdpfx Aew Sv Rzonfjwf Number of Blades: 10 rotating, 4 stationary Separator: L2.9 x W1.9 x H3.4 m Crusher: L1.97 x W1.4 x H1.95 m Output varies depending on the type of cable processed. This cable granulation plant is suitable for various types of copper cables with diameters up to 20mm. The cable shredder is straightforward to operate and very efficient. Up to 98.7% of the copper can be recovered from the cables. The machine price is €25,000 net, excluding shipping and installation. Transportation can be arranged upon request. Once you provide the postal code, we will calculate the delivery costs. Please note that transport costs must be added to the purchase price. Offer valid while stocks last. Subject to prior sale and errors! Installation and delivery available at additional cost!

Condition: good (used), Year of construction: 2015, functionality: unexamined, - Total stroke: 300 mm - Maximum press force: 68.9 kN - Power: 0.3 kW Nwodpfxowxvwio Anfof - Min/max air pressure: 3 - 6 bar - Machine weight: 1250 kg

Condition: used, SENNEBOGEN WA-1 Hydraulic Grapple – 1.2 t – Year 2018 – Excellent Working Condition SENNEBOGEN WA-1 hydraulic grapple, designed for material handling applications such as recycling, scrap, waste, and timber. Robust German-made equipment, renowned for its reliability and durability. Technical specifications: • Brand: SENNEBOGEN • Model / Type: WA-1 • Year of manufacture: 2018 • Maximum lifting capacity: 1.2 tonnes • Gripping area: approx. 1 m² • Power supply: hydraulic • Compliance: CE / EAC Condition: • Excellent working condition Nwjdjx I I Thepfx Anfef • No hydraulic leaks • Smooth opening and closing of tines • Cylinders, pins, and structure in good condition • Normal cosmetic wear from use Applications: Scrap handling – recycling – industrial waste – timber – bulk materials. Compatible with hydraulic excavators and material handlers (including SENNEBOGEN models). Additional information: • Equipment available for inspection on site • Loading possible • Export possible • Photos and further details available on request Price: €9,000 (excl. VAT)