Automatic Washer

ROMER MAut

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. Fodpfxofz Nblj Aa Eofw The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. • Controls installed on a swivel arm for better access • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches • Control system for tight closing and full opening of the flaps • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed • Fully automatic operation

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: silo DM: 5m Ffsdpoftdv Uefx Aa Ejw Height: 8 m with outfeeding unit (screw conveyor connection to output) Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary.

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. • Controls installed on a swivel arm for better access • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches • Control system for tight closing and full opening of the flaps • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed Ffjdjfy T Rcjpfx Aa Eow • Fully automatic operation

Condition: used, Year of construction: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of construction: 2001 Commission no.: 0682-10 Rotary current: 400 V / 50 Hz Ffsdpfx Ajwtgcxea Eow Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Condition: used

Condition: excellent (used), Year of construction: 2014, Viessmann Vitoplex 700kw Year: 2014 Type: SX2A Output:700Kw Viewing only by telephone arrangement! Fedpfxotu T I Uj Aa Eefw Preferential sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC Fedpfx Aewp Rqfea Eofw • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: used, functionality: fully functional, Year of construction: 2006, 1 used concrete mixing plant Manufacturer: Liebherr Type: Betomix 1.0 Year of construction: 2006 Capacity/h : 60 m³/h compacted concrete Aggrgate inline silo: 120m3 (4 x 30 m³) Mixer: Liebherr ring pan mixer 1.0 Dosing: Aggregates: by weighing belt Cement: cement scale Water: water dosing hopper, Admixtures: Chemical scale / chemical dosing device Control container: include control system: SIMMA silos: 3 X 100to (Transport dimension D=3m, feet can be unscrewed) INCLUDING VARIOUS SPARE PARTS AVAILABLE IMMEDIATELY PRICE INCLUDE DISMANTLING Ffodpowk Hxhefx Aa Ejw offer and all price are net and ex stock without guarantee and/or guarantee, mistakes and/or false representations reserve, purchasing like see / how is it – standing or recumbent, subject prior sale IT IS FORBIDDEN TO COPY OR PUBLICATE THIS OFFER BY ANY THIRD PARTIE OR THIRD PERSON

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2006 Motor power 7,5kW Ffedpfx Ajxtxi Ioa Esw Input table automatic feeding 4,10m (throughfeed system) Outut table automatic 6 pcs. kickers on right outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: used, functionality: fully functional, Sawmill for sale: The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Due to their design, they are suitable for processing both soft and hard hardwoods. The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: - 2-1 Log store with splitter Ffsdpfx Aaev Hm T Sj Esw - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 8 (12)* Panels thickness (min/max) mm 8 / 60 Numerical Control "StarTouch" + "Touch 7" Feeding speed m/min 12-18 Top pressure system with rubber belt (C.N.) Spraying unit (Anti-sticking liquid) AAR In-feed fence, adjustable by N.C. "EASY SIZE PLUS" Pre-milling Unit (vertical joint trimmers) 2 x Kw Lamps to heat the workpieces side Ffsdpfx Aaoxlqnto Ejw Glueing Unit (P.U.R. Glue + Quick Melt system) "VC/800" - "VC/6" + "AirFusion AF15" Band Pressure zone (N.C. adjustment) Edge coils supporting unit - 1 Snipping (end-cutting) K/SEL Rough Trimming unit RS/K Fine Trimming unit RI / 800 (3 pos.) Multi Function Unit (Profile contour Trimming Unit) “4 EDGE” KIT Spraying Unit (for sliding liquid) Profile edge scraping unit RAS/1000 Glue scraper RCA / 2C Milling grooving unit K-100 (1 x Kw 1,8) 90° Hot Air Heater (to reactivate the color of plastic tape) Panels Return System "SAG" Mod. SPINNER 47 / 63