Twin-shaft shredder

RSS 2 shaft shredder 600 serie

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Stator blades: 2 Kfsdpfxsufi Rxe Ah Usa plus blade set: 2 Blade setting table

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Kedpfsdwf Dbsx Ah Usfa

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Kfjdpet Hagnjfx Ah Uea Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: used, machine/vehicle number: 149774, for screws: M 8 - M 16 max. tightening torque: 140 Nm Kjdeby Np Ejpfx Ah Ujfa Tool holder, square: 1/2" electrical connection: 220 V, 280 W weight: 3,3 kg

Condition: new, workpiece weight (max.): 30 kg, rotor diameter: 700 mm, The BALANCING MACHINE 9A713 is a universal horizontal-axis balancing machine designed for light rotors up to 30 kg in various configurations. This series incorporates innovative technical solutions, ensuring that balancing is straightforward and accessible. With high performance and functionality, the 9A713 is popular in manufacturing across multiple industries. Originally designed for small series and individual production, its versatility and productivity have also made it a favorite in various repair shops. HIGHLIGHTS • High balancing accuracy 0,4 gmm/kg = 0,4 µm Kodpfx Ahjtu Ukao Usfa • Advanced Rollers: Specially designed rollers with advanced grinding technology mounted on precision bearings. • Bearing Design Options: Hard-bearing design suitable for small rotors, with optional soft bearing support available. • Belt Drive System: High degree of belt tensioning repeatability with a micro-tuning function for precise belt tension adjustment. • Quick Changeovers: Easy access to support rollers for quick rotor reinstallation and rapid replacement of roller units with prism units, significantly reducing changeover time. • Versatile Rotor Balancing: Capable of balancing rotors with small distances between bearing journals, limited only by the drive belt width. • Variable Speed Control: Frequency inverter asynchronous electric drive with a powerful motor for infinitely variable speed control and smooth acceleration/deceleration. • Height-Adjustable Supports: Adjustable supports to accommodate different bearing journal diameters, aiding in centering the workpiece. • Easy Installation: Requires no special foundation and can be installed on a standard concrete floor. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • Easy to learn working skills and maintenance for any employee. SPECIFICATIONS Weight range of balanced rotors 0.3 - 30 kg (60 kg) Maximum rotor diameter (above the bedding) 700 mm Distance between centres of rotor supports 10 – 700 mm Support type Rollers + Prisms Transmission element for rotor rotation Belt Minimum achievable residual specific unbalance 0.4 g*mm/kg Rotor speed range 300 – 2000 rpm Electric motor power 0.75 kW Parameters of the supply network 380V, 3 Ph, 50Hz Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: like new (used), Year of construction: 2024, operating hours: 420 h, functionality: fully functional, machine/vehicle number: 122, total length: 9,900 mm, total width: 2,450 mm, total height: 4,000 mm, overall weight: 21,000 kg, rotor diameter: 680 mm, rotational speed (max.): 42 rpm, power: 235.36 kW (320.00 HP), Equipment: rotational speed infinitely variable, Demo machine Arjes ekomaxx 800 Kfjdpfovzribsx Ah Uoa Perfect shredder for green waste, waste, waste wood, plastic etc.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, input voltage: 400 V, Mercodor Shredder ZM 44 with a cutting area of 600x380 m with 7.5 KW drive, knife assembly 19 mm, 3 hooks. Kodpfxovupbze Ah Ujfa

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Kfedpehh A Iyefx Ah Usa Aluminum ascending conveyor belt including substructure Incline start area level ground (adjustable) Discharge height 1800mm (adjustable) Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 500mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overbelt magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnets, magnetic belt separators, lifting magnets, filter rods, magnetic grids, magnetic grids, metal separators, block magnets, filter systems

Condition: reconditioned (used), functionality: fully functional, Rotary shear, twin-shaft shredder, Drive power: 110 kW (2 x 55 kW), Rated current: 210 amps Blade width: 75 mm Cutting unit size: length 1600 mm x width 980 mm Quick-change blade system, SEW gearbox, Kedpfx Ahowva His Uefa Including hydraulic pusher, hydraulic rated power: 7.5 kW, Control cabinet, Cutting unit overhauled, Dimensions: Length approx. 6150 mm x width approx. 3100 mm x height approx. 3150 mm, Total weight: approx. 17 t

Year of construction: 2021, condition: new, machine/vehicle number: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm flat + 2200mm rising Pitch angle in bend 45°C Discharge height: approx. 1800mm Height of the horizontal top edge 200mm PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matt Belt width 500mm 21 pcs. T30 studs welded - pitch 310mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Full-surface underlay sheet Drive: Motor approx. 1.1KW Kjdpfxjh Eld Es Ah Usfa Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54