Office copier

Samsung MultiXpress CLX-9201NA

Condition: like new (used), • “NEW Machine” customer experience • Ultrasonically cleaned, Wrapped, boxed Nsdoxac R Njpfx Aacoku • Refurbished with long life parts/original • Parts cleaned • Precisely assembled • Original toner filled to 30% in the machine (Approx. 7,000 prints/color) • Updated English firmware • Counter reset • Pre-installed, tested: plug in and use • Minimum 400,000 page machine life guaranteed • ISO certificate • Environmentally friendly

Condition: good (used), functionality: fully functional, Layher uprights 3.00 m used – original Allround uprights for system scaffolding These used Layher uprights of 3.00 metres are original parts of the Layher Allround scaffolding system. The uprights form the vertical backbone of your scaffold structure and are suitable for nearly any type of construction project, from new builds to renovations. The uprights feature the well-known rosette at fixed intervals, allowing you to quickly and safely connect ledgers, braces, or consoles. Despite visible signs of use, they are in good technical condition and ready for immediate deployment. 🔧 Specifications Length: 3.00 metres Type: Layher Allround system upright Material: Galvanised steel – weather resistant and durable Nkedpfsw Nh U Tex Aacou Connection: With fixed rosettes for fast coupling Condition: Used, functionally checked, with normal signs of use Note: export only

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW Nkodpfx Aasw A Apyecju weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: new, welding current 15 - 40 A cutting capacity 1 - 16 mm open-circuit voltage 96 V Required air-pressure min. 4 bar connected load 3,6 kW connected load frequency 230 V weight 9,0 kg Dimensions (LxWxH) 371 x 153 x 232 mm Njdpfx Aaoupxfhocsku Exhibition machine !! Inverter plasma cutter with accessories: Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressure gauge, Mask and brush.

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art.no.: 3690041 Nsdpfx Aeilg Hdoaceku Condition: New machine cutting range (round): 300 mm belt speed: 20-100 m/min, infinitely variable standard equipped with: - Fully hydraulic, semi-automatic version. after starting, the machine clamps automatically after the end of the cut, it returns to the starting position stops the saw band and opens the vice. - Cutting probe for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Monitoring of saw band tension, electromechanical - Chip clearing brush - Measuring stop with scale 1.000 mm - coolant device - Operating instructions

Condition: new, Bernardo drill grinding machine DG 32 Pro Specifications Drill diameter 2 - 32 mm point angle 90° - 135 Speed 4800 rpm Motor power 0,25 kW Voltage 230 V length 350 mm width 210 mm height 305 mm Weight approx. 32 kg Scope of delivery - Diamond grinding wheel SBC - Collets ER 20, 3 - 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) - Collets ER 40, 13 - 32 mm, 20 pcs (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) - Collet holder ER 20 resp. ER 40 Features - Including device for pointing, i.e. better centering of the drill tip on the workpiece and reduction of the necessary feed force Nkjdsgd H U Ujpfx Aaceu - 30 pcs. ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes - Additional station for relief grinding of the drill cutting edges (clearance angle) - Universally adjustable point angle from 90° - 135 - Rotor with precision ball bearing ensures very smooth operation - Fast and precise working results due to simple operation - Vibration-free running due to high dead weight and rubber feet

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW Nodpfexablxox Aaceku weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2007, Year of construction: 2007, Equipment: ABS, * Meiller G18 EL 5.0 roll-off trailer * Registration date: 04-2007 * Empty weight: 3,840 kg Nedpfx Ajuyxuljacjku * ABS * more pictures and videos via Whatsapp * Information without guarantee and subject to prior sale.

Condition: new, The machine does not include a stand. The BF3 Deluxe stand is available separately under item no. 56-1017. Technical specifications: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm / rev Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Milling head tilting: -60° to +60° Distance spindle to table: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Lifting motor: 90 W Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor - Input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Approx. weight: 322 kg Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - Keyless drill chuck 3 - 16 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Drawbar spindle M 16 - Reducing sleeve MT 4 / 3 - Combined milling arbor MT 4 / 27 mm Nksdpfx Ajv N Uyrjacsu - Height-adjustable protective cover - Automatic spindle sleeve feed - Lifting motor for milling head - LED machine light - Digital spindle sleeve stroke display - Thread cutting device - Lamellar protective cover - Longitudinal measuring scale - Operating tools Without base frame

Condition: used, Technical details: length: 750 mm height: 800 mm welding current: 120 machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F - with torch package 6,0 meter Nksdpsu R A Dlofx Aacsu - with ground cable 12,0 meter OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. - volume flow 616 liters/min. - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels *