Sandwich panel production line

Sandwich panel line for sale Ecosystem Italy

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 Nsdpowu Tu Defx Afaecn WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: used, Year of construction: 2000, Number of boring spindles 5 St. Working width 230 mm Working height 160 mm Ncjdjwztw Sjpfx Afajn Feed motor 4 kW Feed speed 5-24 m/min.

Year of construction: 2020, condition: excellent (used), 2 cats EK DMR Njdpfxotu Nmde Afaecn

Condition: used, Year of construction: 1994, Technical details: production capacity: 2x 4,8 MW number of Generators: 2 Stück fuel tank capacity: 480 m³ Ncsdpou Nxatofx Afaon type of fuel: Gas + Öl Complete Power Plant 2 combustion engines 12 cyl V -Motor Make Maschinenwerke Halberstadt Type: 12 VDG for oil and gas 2 Generators Make Leo Somer with: - electrical capacity 4,6 MW each - mechanical capacity 4,8 MW each - thermal capacity 4,8 MW each - 2 recovery boiler - Stromeinspeisung: Mittelspannung 10 KV (direkt ins Netz) furthermore: heat exchanger, catalyst, control room, medium high voltage system, oil preparation plant, intermediate storage tank + fuel depot tanks 4,8 m³ *

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR Nsdetrd T Topfx Afascn

Condition: ready for operation (used), Year of construction: 2013, sheet thickness steel (max.): 25 mm, power: 6 kW (8.16 HP), Working area 3000x1500. Loadmaster system included.Due to not using machine for longer time,the service is required. Nsdewh R R Njpfx Afajcn

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Load capacity: 12000 kg Max sheet width: 1600mm Coil diameter: 1800mm Weight : cca 14 t Ncsdpfx Afohrnbkeaon Without control cabinet!

Condition: used, Year of construction: 2015, machine/vehicle number: A2536805, pressure:40 t stroke:250 mm Ncedpfx Asfxyhfjfasn return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l

Condition: used, A fully assembled and working pellet production line with a capacity of up to 3 tons per hour is for sale. The factory is little used – only 16,000 tons were produced, it is in very good technical and visual condition. Ncedpsx S Egmefx Afajn Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. No additional premises are required for the installation of the plant, the pellet press is already built into the container. The line includes: Press and mill: Salmatec Maxima 700 – reliable German quality with high efficiency and long-term stability. Transport and dosing equipment: Rematec – robust and accurate material supply at all stages. Tent shelter. Additional equipment: cyclones, sieves, cooler, control panel, etc. All DWG files, drawings for the foundations of the equipment are available. Main advantages: Large production capacity – up to 3 t/h. High quality components from European manufacturers. Ability to adapt to usage of different raw materials. Line in working order – can be demonstrated in operation. Available immediately.

Condition: excellent (used), Year of construction: 2019, X-axis 5,000 mm Y-axis 3,000 mm Z-axis 1,500 mm Table size 5,000 x 2,500 mm Tool holder HSK 63 Tool changer 60 positions Control HEIDENHAIN TNC 640 Including through-spindle coolant (IKZ) 40 bar Including simultaneous fork head Including complete documentation Ncsdpfxox E S E Ne Afajn Including IKZ 40 bar