Tractor Head

SCANIA R 420 RETARDER VOITH CAMBIO MANUAL 12V

Condition: used, ALREADY PACKED ‼️ IMMEDIATE DELIVERY ‼️ Giodpfxowakktj Abdel 🔥 Several pieces of Fröling Turbomatic (TMC) wood chip boilers for sale – 35 / 48 / 55 / 110 kW outputs! 🔥 Quality, automated Fröling TMC series biomass boilers for sale, with different outputs. An ideal choice for families from single-family homes to small industrial facilities, where reliable, economical heating is important. ⸻ Available types: • Fröling TMC 35 kW – for smaller systems • Fröling TMC 48 kW – for medium heat demand • Fröling TMC 55 kW – larger workshop, farm • Fröling TMC 110 kW – for industrial/agricultural systems ⸻ Features: 🌲 Fuel: wood chips, pellets, shavings 🔁 Automatic operation: dosing, cleaning, ash removal 🧠 Advanced combustion control, intelligent control ♻️ High efficiency, low emissions 🇦🇹 Fröling – Austrian premium biomass technology 💥💰 Prices vary by type – inquire by phone or email! 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Wide selection of used Froling boilers, with expert support.

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Gijdpjt N Antofx Abdel Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Condition: new, capacity 90 degrees: round 125 mm capacity 90 degrees: square 125 mm 127 x 125 mm dimensions of saw-band 1435 x 12,7 x 0,65 mm band speed 38 - 80 m/min total power requirement 0,95 kW Gijdpfeupw R Nex Abdel weight of the machine ca. 18 kg dimensions 720 x 380 x 450 m Both straight and miter cuts can be made at angles between 45 and 90 degrees. With the metal band saw you not only work precisely, but also quickly: the band speed can be variably adjusted between 38 and 80 meters per minute. With a weight of only 25 kilograms, the saw can be used mobile.

Condition: used, mileage: 2,659 km, power: 188 kW (255.61 HP), first registration: 08/1983, overall weight: 7,899 kg, fuel type: diesel, color: orange, axle configuration: 4x4, tire size: 14.5r20, operating hours: 1,488 h, machine/vehicle number: 573, Equipment: all wheel drive, compressor, differential lock, hydraulics, second-hand vehicle warranty, TUV Can be made on request , The Intrac are in good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in good condition , The Intrac 2011 is equipped with: 4 steering positions, all-wheel drive, differential locks, 1 seat plus emergency seat , High off-road capability for extremely heavy winter service. The snow blower can also be set at an angle. Tire size 14.5R20, the drive is fully hydraulic with fast and creep speed, total weight is 7900 kg, displacement 12756cm? , , 24Volt power supply , There are also several defective Intrac 2011 with wheel and chain drive still in stock at a price of 8000,- € net each All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but you will find over 150 vehicles of the following types here: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a callGreetings, Philipp Giedpfxoqx Sz Do Abdol

Condition: good (used), mileage: 578,054 km, power: 309 kW (420.12 HP), fuel type: diesel, fuel: diesel, emission class: euro6, Year of construction: 2017, Engine capacity: 12.419 cc GVW: 13.000 kg Technical condition: good Visual appearance: good Production country: DE Please contact Christian Theißen for more information Manufacturer: MAN Model: TGX 18.420 Year of build: 2017 Condition: Used Giodpfexx N S Rjx Abdel Data: First registration: 23.05.2017 Mileage: 578.054 Km Drive type: Diesel Gear type: Automatic Engine power: 309 kW Displacement: 12419 ccm Number of axles: 2 Environment badge: 4 (green) Emission Class: Euro 6 Wheel formula: 4x2 Cab: Long-distance transport Colour: white Total permissible weight: 13000 kg Location: Essen immediately available.

Condition: used, mileage: 239,000 km, Year of construction: 2015, 2-axle 180ptt truck, equipped with a 6.20x2.55m fixed body with an aluminum bottom, payload 11200kg, ADR, manual transmission, Euro 6 standard. Godpfx Ajwmdy Iobdeil N.B. Please note that the vehicle description is to be considered indicative and may contain errors or inaccuracies. We therefore invite you to contact us to verify the exact correspondence of the data.

Condition: new, Aluminum format sliding carriage (anodized) with hardened steel guide rods. Kickback protection for thickness planer. Anodized parallel stop with micrometric fine adjustment. Slant adjustment of the saw blade up to 45° using a handwheel. Table opening ø190 mm with under-table suction. Milling stop 180 mm. Built-in milling spindle lock. Laying table with telescopic stop, eccentric clamp, degree grid 100% Made in EU (developed, built, quality tested) Technical data: Surface planing unit: Table width: 410 mm Table length: 1800 mm Planing shaft diameter: 100 mm Number of planing knives: 4 pieces Shaft speed: 5000 Motor output power: 5 kW S6 400V (4 kW S1) Thickness unit: Thickness passage, min/max: 4 - 230 mm Feed speed: 7 m/min Milling machine: Useful length of the spindle: 125 mm Height adjustment of the. Spindle: 160 mm Max. tool diameter when profiling: 180 mm Gijdpfxjvrvcae Abdjl when tenoning: 250 mm Spindle speed: 8000/6000/3500/1400 Table openings: 190 mm Integral stop: 500 mm Motor output power: 3.8 kW S6 400V (3kW S1) Circular saw: Format table: 2300 x 285 mm Saw blade diameter max/min: 315 mm/250 mm Incline position: 90° - 45° Max. cutting height: 90° 45 ° Saw blade 315: 102/72 Motor output power: 3.8 kW S6 400V (3kW S1) Weight: 900 kg Optional accessories: Reversible blade (no extra charge) Spiral planer shaft Long hole board Scoring unit

Condition: new, Year of construction: 2025, functionality: fully functional, A powerful, 2.8 kW and 5000 m3/h efficiency, sawdust extractor. Includes burlap filter bags. Machine description FM500 sawdust extractor is an efficient device of high vacuum power. Stable metal design and balanced rotor create a machine useful in any workshop. Burlap filter bags with up to 5 micron diameter filtering. Equipped with a splitter which allows up to 4 machines to be connected simultaneously. Maximum efficiency achieved when connected to 3 machines. FM500 features Metal balanced rotor Quick fixture of burlap bags Portable wheeled base Stable, metal design Bag holders High vacuum power Strong, 3-phase motor Capable of connecting up to 4 machines simultaneously Constant suction efficiency Technical data S1 motor power 2.8 kW Gjdpfx Abjvu Aqpodeil Voltage 400V / 50Hz Motor rpm 2950 rpm Total dimensions 1525 x 560 x 2460 mm Efficiency 5000 m³/h Vacuum up to 2500Pa Air suction speed up to 31 m/s Filtration bags burlap (II filtration degree) Volume of bags 480L Diameters of connectors 200 mm / 4 x (ø 100 mm) Weight 64 kg

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,840 h, load capacity: 2,500 kg, lifting height: 4,300 mm, free lift: 1,416 mm, fuel type: diesel, mast type: triplex, construction height: 2,145 mm, power: 44 kW (59.82 HP), fork length: 1,200 mm, empty load weight: 4,600 kg, total length: 2,260 mm, drive type: Diesel, construction width: 1,442 mm, Rough Terrain Forklift Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Transmission: Hydrostatic Speed Category: 20 km/h Technical Condition: Good Front Tyre Type: Pneumatic Front Tyre Size: 280/80 R20 Front Tyre Condition: 80 - 100% Rear Tyre Type: Pneumatic Rear Tyre Condition: 60 - 80% Description: Manitou Rough Terrain Forklift – 2.5 t lifting capacity, all-wheel drive, uncompromising performance. Robust, reliable, and off-road capable – this Manitou all-wheel drive forklift is the perfect solution for demanding outdoor applications. With a lifting capacity of 2,500 kg and powerful all-wheel drive, it confidently handles rough terrain as well as heavy loads. Features: - Capacity: 2,500 kg - Off-road capability: high ground clearance, heavy-tread tyres - All-wheel drive: for maximum traction on all surfaces - Hydraulic system: powerful and precise - Comfort cab: weather-protected, ergonomic, with excellent all-round visibility - Easy operation: intuitive controls, ideal for changing operators Applications: Giodpfx Aboxzvw Esdjl - Construction sites & civil engineering - Timber and forestry - Agriculture & farm work - Industrial & recycling This forklift is a true all-rounder for those who need reliable performance even off paved paths. Sideshift, 3rd valve, 4th valve, partial cabin,

Condition: new, welding current 20 - 60 A cutting capacity 1 - 20 mm open-circuit voltage 104 V Gijdpfxjupxuvo Abdsl Required air-pressure min. 4 bar connected load 7,9 kW connected load frequency 400 V weight 16 kg Dimensions (LxWxH) 480 x 260 x 360 mm Digital display. Surge protection. Plasma torch. Earth cable. Reducing valve with moisture separator. Equipped with IGBT technology "Delivered without CEE plug".