Shotblasting line

HBM CBS 500

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Fjdpfx Alst N Ante Sjgh Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: Fgodpfx Aspuy H Dsl Ssh - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: as good as new (ex-display), Year of construction: 2026, SRF Master, illustration on the left 2 m extraction arm Application area Low amounts of smoke/dust Occasional use Benefits Requires little readjustment of the extraction hood More flexible due to the additional hose connection at the rear Features Safe operation thanks to filter monitoring Extraction hood can be rotated and swiveled 360 degrees Sliding handle and cable holder Process: 3-stage Filter type: Disposable filter Filter area: approx. 12 m² Separation rate: > 99% Filter material: Glass fiber fleece Welding fume separation class: W3 Fedpfxedqzbro Al Sogh Additional filters: Two pre-filters Basic data Extraction capacity: max. 950 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 2 m Diameter of suction connection: Ø 150 mm Power connection: 230 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Weight: approx. 71 kg

Condition: used, Year of construction: 2019, machine/vehicle number: F 2019-1300-336, Ref. No. 25243 Technical Data: - Applications: - Demoulding blasting, electrode manufacturing, surface priming; - Surface texturing using rapid tooling technology, cleaning blasting (soft blasting) - Negative pressure cabin with viewing window and motorized tilting hood - Tilting hood motorized up to 90° - Blasting chamber accessible manually via two work gloves - Blasting gun - Turntable made of steel, manually rotatable, 1000 mm Fjdpfx Aljwy Ukwj Segh - Internal blasting chamber height: 500 / 840 mm - Internal blasting chamber width & depth: 1100 mm - Abrasive drying system, electronically and steplessly adjustable - Dust extraction unit: Microfilter unit type IMF-2 - Compressed air connection up to 10 bar - Drive: 400 V / 2.9 kW - Space requirements: approx. W 1400 x H 2300 x D 3100 mm - Weight: approx. 900 kg - Separate work platform with stairs: W 1400 x H 1300 x D 1300 mm - Recorded operating hours: 52 h - Operating manual

Condition: new, Year of construction: 2025, functionality: fully functional, Cabinet Sandblasting Machine CORMAK 1200L is a premium industrial-grade surface treatment device designed for high-efficiency abrasive blasting operations. Its double-sided construction with two independent working stations allows two operators to work simultaneously, significantly increasing productivity and reducing downtime. The cabinet is designed for intensive use in workshops, regeneration facilities, shipyards, automotive, aerospace, and heavy industries. Main advantages of the machine Large 1200-liter working chamber – enables sandblasting of large metal components and structural elements. Double-sided operation – two pairs of gloves, two blasting guns, two control systems, and two cyclone extraction units allow two operators to work at the same time. Dust-free operation thanks to efficient extraction systems and sealed perimeter gaskets. Durable steel construction – designed for demanding industrial environments. Compatibility with various abrasives: corundum, glass beads, electrocorundum, crushed shells, and technical sand. 15 replaceable protective visor films – ensure long-lasting visibility during operation. Intuitive operation – foot pedals, ergonomically positioned connections, and pressure control systems. Construction and technology The CORMAK 1200L model is manufactured from high-quality steel and protected against corrosion. Two working stations located on opposite sides of the cabinet allow simultaneous blasting from both sides of the workpiece. Each station is equipped with an independent blasting gun, pressure regulator, foot pedal control, and cyclone dust extraction system. This solution ensures high productivity while maintaining safety standards and operator comfort. The spacious interior and wide access openings allow easy handling of large components. Precision and work efficiency The operating pressure range of 4–8 bar allows adjustment of blasting parameters according to the type of material and abrasive used. The dual nozzle system and independent workstations guarantee high productivity without compromising precision. Closed-loop operation combined with an efficient dust extraction system provides the operator with excellent visibility and a clean working environment. Applications The CORMAK 1200L cabinet sandblasting machine is a versatile industrial solution suitable for many applications, including: Sandblasting of wheels, frames, suspension components, and body parts. Metal blasting in manufacturing and repair facilities. Surface preparation before powder coating, galvanizing, or welding. Cleaning, smoothing, and restoration of industrial, wooden, and plastic components. Professional abrasive blasting applications requiring fast, precise, and clean surface treatment. Standard equipment 8 ceramic blasting nozzles 15 replaceable protective visor films 2 industrial blasting guns 2 pairs of protective gloves integrated into the cabinet 2 cyclone dust extraction systems 2 pressure regulators 2 foot control systems Technical specifications – CORMAK 1200L cabinet sandblasting machine Parameter Specification Fsdpfev Aad Asx Al Ssgh Internal cabinet dimensions 1150 x 1260 x 800 mm External dimensions 1800 x 1400 x 1880 mm Operating pressure 4–8 bar Capacity 1200 L Abrasive materials Corundum, glass abrasive, sand Weight 196 kg Note: The machine is supplied in a self-assembly version.

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Coil dispenser for wire Lincoln Idealarc DC-600 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 600 Amps at 100%. Welding equipment: Idealarc DC600 220/380/440 3/50/60 Input voltage: 220/380/440V Input current: 116/67/58A Fgodpfx Aou Afwljl Soh Input Hertz: 50/60 Input phase: 3 Input power: 220/380/440V/3/50/60 Output range: CV:70A/13V - 780A/44V DC:90A/24V - 780A/44V Rated output: 600A/44V/100%. 680A/44V/60%.

Condition: new, Year of construction: 2026, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm Fodpfsr Eli Tjx Al Ssgh -Drilling length max. 240 mm -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Pro Sandblaster for Industry Pressure Unit SAPI Mammut Sandblasters with QUICK STOP™ System The SAPI Mammut sandblasters with the QUICK STOP™ system are powerful industrial sandblasting machines, designed for use in industries such as automotive, construction, and manufacturing. These machines ensure fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other materials. QUICK STOP™ – Safety & Protection The SAPI QUICK STOP™ system is a safety feature designed to prevent accidents and protect the machine from damage. It works by immediately stopping the blasting process as soon as the operator releases the control handle. This instantly cuts off the abrasive flow, preventing potential hazards and protecting the equipment from overuse-related damage. Efficiency & Durability The QUICK STOP™ system reduces air and fuel consumption, making the sandblasting process more efficient and cost-effective. The Mammut sandblasting machine is built for durability, featuring high-quality components that ensure consistent performance, even in harsh conditions. All our machines are fully CE- and TÜV-certified. Flexibility & Versatility The machine is available in different sizes to meet various sandblasting needs. It is compatible with a wide range of abrasive materials, from standard sand to specialized plastic or metallic media. The Mammut with QUICK STOP™ can be used for surface preparation, cleaning, and removing rust, paint, and coatings. Precision & User-Friendliness The Mammut with QUICK STOP™ allows for precise pressure control and adjustment during operation, ensuring consistent results and high accuracy. Additionally, inspection and maintenance access points are designed for easy upkeep. Maximum Safety The QUICK STOP™ system with a dead man’s switch ensures maximum safety during operation. It also prevents moisture buildup inside the machine, as pressure remains constant even when blasting stops—a major advantage over standard on/off blasting systems. Fully Equipped from the Start All Mammut sandblasters with QUICK STOP™ come fully equipped. Our standard package includes: ✔ Sandblasting hose ✔ Nozzle ✔ Pressure control valve ✔ Water separator ✔ Abrasive dosing valve Fgjdpfoupyw Eex Al Ssh ✔ Basic personal protective equipment

Condition: ready for operation (used), Year of construction: 2015, Length: 9401mm, width: 2091mm, height: 5668mm, weight: 8.816t, with pipes and documentation, the dust collector was not used much. Fsdjk Ea Uuopfx Al Segh

Condition: used, Year of construction: 2015, through-put width 580 mm Fgedpfxsw Rrcwo Al Seh working heigth 580 mm air consumption 400 - 800 l/min working pressure 3,4 - 8,0 bar suction capacity 17,4 m³/h total power requirement 1,2 kW weight of the machine ca. 115 kg dimensions of the machine ca. 1225 x 935 x 1640 mm Description - Suitable for various blasting materials, e.g., quartz, glass beads, plastic beads, etc. - Ideal for cleaning, derusting, or paint removal from all types of metal parts , e.g., engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety during workpiece processing thanks to the viewing window with adhesive protective film - Dust-free working thanks to circumferential seals on the lid and door frame - Sturdy storage grid allows workpieces to be placed inside the cabin - With drain opening for changing the blasting material - Suction pipe for the blasting material attached to the bottom of the collection container - With compressed air connection on the outside - Glass bead blasting material, corundum blasting material, silicon carbide, plastic blasting material, etc. can be used Equipment details: - Very large front flap opening upwards with gas pressure springs for quick and easy loading and unloading - Integrated extraction system with replaceable air filter - Blasting gun without finger trigger – air flow controlled via foot pedal - Two fluorescent tubes (230 volts) in separate housing with protective screen and replaceable protective film, including five replacement films - Light switch with dual function: extraction and cabin lighting are switched on and off simultaneously - Working pressure regulated via pressure regulator with pressure gauge