Mesh welder

Schlatter MG950

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Redor Nfvmepfx Am Tjcd Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Unilog 4000 Closing force 60 tons Year of manufacture 1997 Rsdpfx Aeg Emvhsm Tecd Screw diameter 30 mm Shot weight approximately 90 g

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: M-900iA/260L R-30iA, load capacity: 260 kg, arm reach: 3,100 mm, controller manufacturer: Fanuc, controller model: R-30iA, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics®: Refurbished industrial robot. Reliability as standard. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Type: M-900iA/260L Redpfjp T Umqjx Am Tjcd Controller: R-30iA Payload: 260 kg Reach: 3.1 m General purpose: Heavy-duty, long-reach robot Robot mass: 1800 kg Delivery time: To be agreed upon mutually IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our core business is the reliable delivery of refurbished A-brand robots: ABB – KUKA – ABB – YASKAWA. Established in 2002. We ship worldwide!

Condition: excellent (used), Well-maintained Hammelmann HDP 42, 970 bar and 16.5 litres, year of manufacture 2012. Rsdpfx Amoxgvhno Tecd

Condition: good (used), Hook type shotblasting machine 250 kg TURBOTECNICA DELTA GR 7-10 Type: Hook type Max. diameter of workpiece: 750 mm Max. height of workpiece: 1000 mm Max. workpiece weight: 250 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 260 Turbine wheel diameter: 260 mm Power of turbine: 5,5 kW Max. turbine flow: 74 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 2.000 m3/h Total weight of machine: 0 kg Total width of machine: mm Rcodpfx Ajwm Ar Nem Tod Total height of machine: mm Total length of machine: mm Machine is ready for operation

Condition: new, Year of construction: 2026, -Tfon Leveltech® S-3513 Leveling Machine. -The Tfon Leveltech® S-3513 is a precision leveling machine optimized for ultra-thin materials, combining advanced electromechanical controls with easy operation for consistent, high-quality flattening results. Rcodokyrzlspfx Am Tjd -Key Specifications: Material Thickness: 0 – 0.3 mm. -Maximum Material Width: 1.300 mm Minimum Material Length: 70 mm Quick Change System for Straightening Rollers: Standard. Flattening Gap Adjustment: Electromechanical / PC Controlled. Machine Dimensions (L × W × H): 2,685 × 1,585 × 1,820 mm. Total Weight: 5.000 kg.

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min Rcjdpfxsy Tplij Am Ted main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm tool taper BMT 55 C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min work piece power 5,5 kW total power requirement 68,4 kVA Accessories: collet fixture make KITAGAWA, CRS 66, on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: limited functionality, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. Redpsxc E Trjfx Am Tjcd An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package.

Condition: used, Year of construction: 2018, operating hours: 3,450 h, functionality: fully functional, overall weight: 23,000 kg, For sale here is a Plug & Play Nitrogen Generation Plant (Nitrogen Generator) Brand: AtlasCopco / AirCo Type: PSAL58SN Year: 2018 Serial No.: 2018-21968 Weight: - Temperature range min./max.: +3°C / +45°C Max. pressure: 300 bar Operating voltage: 400 V Installed in a 40" insulated container with supply/exhaust air, winter/summer mode Activated carbon stage Type AK300 Pre-/Post-filter Type AF267UHU Nordpol Cut System Type 100PlusPan 2 x high-pressure compressors, each 15 kW 2 x nitrogen tanks, capacity 500 L / 1,000 liters each Absorption dryer Type A-DRY-105 2 x Filter Type AF85H 6 x 300 bar nitrogen bundles Collection only – disassembly and transport by the buyer or by arrangement If interested or for questions, feel free to send me a message. Additional photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. Net export price For further questions please call Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype Rcodpfxjxvtl No Am Tod We can handle all customs and registration matters for an additional charge. We can deliver the vehicles to the port for an extra fee.

Condition: excellent (used), Year of construction: 2018, arm reach: 1,300 mm, Reach: 1300 mm Load capacity: 12.5 kg Weight: 33.5 kg Type: MSIP-REM-URK-UR10 Year of manufacture: 2018 Serial number: S300711 Lorch S5 RoboMIG XT cobot welding system 400-A welding system. Rcedpfx Aew N N Dcjm Ted