Compressor

SCHNEIDER AM-B-7-10-500 XBDK

Condition: excellent (used), Year of construction: 2019, Technical data: Pressure 10 bar Flow rate 1080 l/min Voltage 400 V Drive power 7.5 kW Weight 431 kg Noise level 63 dB(A) Air outlet 3/4" Dimensions (WxDxH) 1950 x 690 x 1700 mm with integrated refrigeration dryer, automatic condensate drain, oil-water separator Giodpfx Acoxq Elwe Ajp

Condition: like new (used), Year of construction: 2014, operating hours: 15,000 h, Atlas Copco compressor stage after refurbishment. Gjdpjmzbdwofx Ac Ajip

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Gijdpfx Acsncd Aze Aep Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: excellent (used), Year of construction: 2018, operating hours: 100 h, We specialize in the remanufacturing of blowers, compressors, and vacuum pumps. We service equipment from manufacturers such as: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, and Tuthill. We also offer blowers and compressors for rental. We operate throughout Europe and beyond. Gijdpfx Acen Tntqj Aop

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 1,020 mm, construction height: 410 mm, lifting height: 600 mm, empty load weight: 150 kg, load capacity: 350 kg, total length: 1,900 mm, total width: 740 mm, warranty duration: 24 months, LEVEL - Lift Table HS 350 Large without worktop Description: ᐳ Mobile scissor lift table with double horizontal scissors, basic version without worktop; with platform base frame for accommodating various worktops; 4 swivel castors, 2 with brake; Wheel diameter 125 mm; operated by foot pump Load capacity in kg: 350 Weight in kg: 150 Useable lift in mm: 610 Construction height in mm: 400 Gsdoh A Hxiepfx Ac Ajip Total height in mm: 1010 Platform size in mm: 1900 x 740

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm Giedpfx Asr Ak Rgjc Aep rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: new, Year of construction: 2025, MAX MAMMUT 400-500-600: High speed log profiling line (up to 600 mm in diameter) for the production of prisms, "river use", "trieste use" beams, boards in general and semi-finished products for pallets. Gisdpehpbthefx Ac Asp FULLY HYDRAULIC MACHINERY Minimum diameter of logs 120 mm Maximum diameter of logs 600 mm Minimum working length mm 1.800 Maximum working length mm "Infinite" (∞) Tool holder shaft diameter 60-80 mm Cutter diameter mm 300 Feed speed mt / min. 5 - 70

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, new KAESER SXC8 screw compressor system (10 bar) available immediately with integrated refrigeration dryer with 215 liter compressed air tank with electrically level-controlled condensate drain with Sigma Control 2 control Year of construction: 2022 Operating hours: 1.5 operating hours Technical data: Volume flow at 10 bar: 0.67 m³ / min Nominal power drive motor: 5.5 kW Electrical supply: 400 V / 3 ph / 50 Hz Dimensions W x D x H in mm: 620 x 980 x 1480 Weight: 260 kg Compressed air tank: 215 liters Compressed air connection: G 3/4 " Sound pressure level: 69 dB (A) Gedpfx Acshhiw No Aoip Refrigeration dryer pressure dew point: 6 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table - top drawing rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment - hydraulic cutting height adjustment - hydraulic feed - four top pulling rollers - four rows of anti-rejection latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser Gsdpfsqup Anjx Ac Asip - feeding table belt 5700 mm - width of table 600 mm - top roller pneumatic pressure roller - speed of table regulated on inverter - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm - four drop chains - distance between chains 1900 mm Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t

Condition: excellent (used), Year of construction: 2021, operating hours: 5,780 h, functionality: fully functional, power: 7.5 kW (10.20 HP), operating pressure: 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, type of cooling: water, Equipment: refrigerant dryer, type plate available, Kaeser Complete Compressed Air System - SM 13 + TA 8 + OKS (Otto Klein) For sale is a complete, fully operational compressed air system consisting of: 1. Kaeser SM 13 screw compressor (Aircenter, detailed information attached) 2. Kaeser TA 8 refrigeration dryer (please refer to the attached image for detailed information) 3. OKS Otto Klein compressed air receiver (please refer to the attached image for detailed information) The unit already features an integrated tank and built-in cooler. Additionally, the package includes a separate cooler and compressed air receiver, as shown in the images. This means that both the internal equipment and the supplementary accessories are included in the delivery scope. The system has been regularly maintained, is in excellent, ready-to-use condition, and is immediately available for operation. Our Service Commitment: We prioritize quality, expertise, and customer satisfaction above all else. Our team is composed of qualified and experienced technicians who specialize in Mazak machinery as well as other machines. We place great importance on personal service and are happy to assist you even after the purchase. With us, you are in the best hands – professional, reliable, and passionate about machinery! Gijdpexwbdvefx Ac Asp PS CNC Service Germany GmbH & Co. KG All information subject to change. No liability for errors or omissions.