X-crane traverse with variable chains

SHT X-Traverse STV

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, Podpfx Ashyc Nwsazjrb i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: ready for operation (used), Rotary indexing center RT100/12-26 Manufacturer: Pfiffner Serial number 1101141101 Operating hours: 42,500 Pjdpfx Aaei Ewn Eszsrb Footprint: 14m x 8m

Year of construction: 2008, condition: used, machine/vehicle number: 820505-01+02, Lg. no. 24208 + 24209 2 pcs. Load turning devices Technical data : - Load capacity per ROTOMAX 25 t - max. torque 14000 Nm - Rotation speed 2.6 m/min - Operation via manual remote control with intermediate cable - Length of intermediate cable approx. 8 m - Load turning belt with 160 mm belt width Podpstpbwhjfx Aazjrb - Mounting pin 140 mm - Connection 400 V / 3.0 kW each - Space requirement per unit approx. W 2200 x H 1300 x D 900 mm - Weight per unit approx. 2100 kg

Condition: new, machine/vehicle number: 0770, empty load weight: 2,800 kg, maximum load weight: 20,000 kg, overall weight: 22,800 kg, axle configuration: 2 axles, loading space length: 6,000 mm, loading space width: 2,000 mm, loading space height: 640 mm, tire size: 450x300x305, tire condition: 100 %, Year of construction: 2026, operation weight: 22,800 kg, Transportwagen TPW 20 AL-AS Typ: TPW 20 AL-AS Nutzlast: 20.000 kg Baujahr: 2024: Länge Ladefläche: 6000 mm Pedpfxohbh Rtj Aazorb Breite: 2000 mm Höhe: 620 mm Transportboden: 40 mm Fichte Lenkung: Allradlenkung-Achsschenkel-Niederflur Bereifung: 450x300 Zugdeichsel: 1.600 mm Lackierung: RAL 2000 #Schwerlasttransport #Innerbetriebliche Transportsysteme #Schwerlastanhänger 6-100 Tonnen #Schwerlastanhänger ab 3 Tonnen bis 100 Tonnen #Schwerlast Transport Plattformwagen #Plattform Schwerlastanhänger #Allradlenkung #Transportwagen #Niederflur

Condition: excellent (used), mileage: 117,563 km, fuel type: diesel, color: red, lifting height: 36,500 mm, first registration: 05/2015, mast type: telescopic, Year of construction: 2015, = Additional Options and Accessories = - PTO = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 6,374 cc Drive: Wheel drive Dimensions (L x W): 1103 x 255 cm Pedpjuxu Dyefx Aazjrb Functional Mast length: 35.2 m Lifting capacity: 40,000 kg Superstructure brand: TADANO ATF 40G-2 CE marking: yes Condition Technical condition: very good Optical condition: very good TADANO ATF 40G-2 CRANE UNDERCARRIAGE: 279 hp 4X4 DRIVE 117,563 km AUTOMATIC TRANSMISSION AIR CONDITIONER / REFRIGERATOR TIRE SIZE 445/95/R25 MERCEDES-BENZ OM 906 LA ENGINE UPPERCARRIAGE HEATING 3 SHAVED WOOD BLOCKS 20T 1 SHAVED WOOD BLOCK 10 T MIN / MAX BOOM LENGTH 10.5 M / 35.2 M MAXIMUM LIFTING CAPACITY: 40,000 KG MAXIMUM HOOK HEIGHT 36.5 M FULL COUNTERWEIGHT ALL DOCUMENTS AND PAPERS AVAILABLE CE CERTIFICATE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH WE SPEAK SPANISH

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 14,890 h, load capacity: 22,000 kg, lifting height: 3,800 mm, free lift: 150 mm, fuel type: diesel, mast type: duplex, construction height: 3,710 mm, motor manufacturer: Scania, gearing type: hydrostat, tire condition: 85 %, overall weight: 33,200 kg, total length: 6,050 mm, total width: 3,030 mm, color: yellow, Heavy-Duty Forklift SMV SL22-1200A Brand: SMV Forklift Type: SMV SL22-1200A Year of Manufacture: 2001 Predsy A Sgbopfx Aazsb Operating Hours: approx. 15,000 h Mast Type: Duplex Lifting Height: 3,800 mm Overall Height: 3,710 mm Free Lift: 150 mm Drive Type: Diesel Engine: Scania Vehicle Width: 3,030 mm Vehicle Length: 6,050 mm Total Weight: 33,200 kg Rated Capacity: 22,000 kg at 1,200 mm load center Special Features: Full cabin, heating, air conditioning, street-legal lighting, beacon, work lights front and rear, fabric seat, panoramic mirror, Service and FEM 4.004 inspection - NEW Attachments: Sideshift and fork positioner Forks: 2,400 mm

Condition: used, functionality: fully functional, machine/vehicle number: E1X359200040, Year of construction: 2009, operating hours: 8,800 h, load capacity: 16,000 kg, lifting height: 5,000 mm, free lift: 2,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,160 mm, power: 142 kW (193.07 HP), fork carriage width: 2,540 mm, fork length: 2,700 mm, empty load weight: 25,920 kg, drive type: Diesel, Heavy-duty forklift – diesel Chassis number: E1X359200040 Load centre: 1200 Fork width: 280 mm Fork thickness: 90 mm Mast type: Duplex Transmission: Hydrostatic Condition: Ready for operation and fully functional Predpfxsxybdue Aazjb Technical condition: Good Front tyres type: Superelastic Front tyres size: 12.00-24 Front tyres condition: 40 – 60% Rear tyres type: Superelastic Rear tyres size: 12.00-24 Rear tyres condition: 20 – 40% Description: Camera, central lubrication Sideshift, fork positioner, 4th valve, full cabin,

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing Podpfx Aaovv Spkjzsrb reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Danumeric 440 overhauled and digitized 2024 Machine version - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Prodpfxsu Dg D Ae Aazjb Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns Data interfaces USB

Condition: used, Heavy-duty shunting trolley, heavy-duty transport trolley Assembly trolley, heavy-duty trolley DIRK PROKOP type 10001-4 Very stable special design Load capacity: 1800 kg Loading area: 2720 x 930 mm Load carrier length: 2720 mm Load carrier width: 140 mm Load carrier height: 135 mm Ground clearance under the load carrier: 100 mm Height of upper edge of load carrier from floor: 235 mm Ground clearance of heavy-duty castors: 15 mm - 2 load carriers made of double-T steel bolted to both sides of the trolleys Podpferktlfox Aazsrb - Load carriers can be easily separated from the trolley using locking bolts - Chassis with very sturdy swivel castors with central brake - Can be moved in all directions (lengthways, crossways, crab steering, etc.) - Load carriers can be driven under with a normal pallet truck to unlock the trolleys - Ideal for in-house transportation of switch cabinets or machine parts for assembly. - The parking brake device and the support blocks on the longitudinal beams can be easily removed. Overall length with trolleys: 3450 mm Width of the trolleys: 980 mm Unladen weight: 350 kg Very good condition