Switchgear & control

Siemens SGT-600

Condition: used, Year of construction: 1994, functionality: fully functional, Equipment: type plate available, For Sale: Complete CHP Plant We offer a complete Combined Heat and Power installation, consisting of: - Two Siemens SGT600 gas turbines (GT5 and GT6) - One steam turbine (ST6) - Generators, HRSG/boilers and auxiliary systems Nledpjx Aghkofx Ah Ujk Capacity: - Total electrical output: 55–60 MW - Steam production: 110 t/h Condition and history: - GT5: recently fully overhauled and operational - GT6: high operating hours, suitable as backup or for life extension after overhaul Application: Suitable for industrial steam and power production, with potential to supply surplus electricity to the grid.

Condition: as good as new (ex-display), Year of construction: 2011, power: 630 kW (856.56 HP), overall weight: 3,340 kg, ABB HIGH VOLTAGE INDUCTION MOTORS Motor Rotor Type 3-Phase Motor Power (KW:) 630 KW Nljdpfoqctpgox Ah Ujk

Condition: refurbished (used), Year of construction: 1995, Combined power / steam plant ( 2 x SGT-600 PLUS steam turbine) Main data below.... 1. Combined power/steam plant consist of - 2 units of SGT-600 PLUS 1x steam turbine 2. Frequency - 50 Hz 3. Total power - 50-55 MW 4. Construction year - 1994. 5. Still installed. Out of production. 6. Location - Europe. IMPORTANT - one natural gas turbine SGT-600 is FULLY REFURBISHED. Please see Refurbishing Report in attach. Nljdex A U R Tepfx Ah Ujk

Year of construction: 2007, condition: good (used), Twence has had a biomass powerplant since 2007 called BEC. The BEC converts biomass into green electricity, enough to provide a town like Hengelo with electricity. To achieve the goal of supplying heat from this plant a conversion was finalized January 2018. Due to this conversion they have been able to produce three times as much renewable energy from virtually the same amount of biomass as before the conversion. The conversion was made by changing out the steam turbine. The MAN MARC6 condensing steam turbine is unable to have a large amount of low-pressure steam continuously extracted and was therefore replaced. The MARC6 steam turbine has been decommissioned and preserved since January 2018. Openings in the roof can be used to remove the generator, gearbox and turbine from the building. The roof can be partially removed, creating a large enough opening for these elements to be lifted through. There is ample space for a crane in between the biomass powerplant and the waste-to-energy plant, if the steam pipe outside is removed. The turbine hall is equipped with a 16-ton overhead crane which can be used to lift specific parts from the Turbine-Generator set. Make MAN Turbo AG Type MARC6-C03 kW 21000,0 Year of manufacturing 2007 Nominal speed (1/min) 5955 Nedpfjl Hydiox Ah Uslk Trip speed (1/min) 6550 Live steam pressure (bara) 66 Live steam temperature (°C) 460 Bleeding pressure 1 (bara) 23,5 Bleeding pressure 2 (bara) 3,3 Bleeding pressure 3 (bara) 0,96 Nom. Exhaust pressure (bara) 0,079

Condition: like new (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: AFA 4 G5a, pressure: 6.6 bar, power: 781 kW (1,061.86 HP), The steam turbine has very low operating hours and was commissioned only once. The control system is integrated into a Siemens control cabinet, Simatic Multipanel type. Scope of supply: - Operating panel - Concrete foundation - Turbine - Generator Electrical output: 781 kWe at 6.6 bar(a) pressure. • Steam turbine (AFA 4 G5a) with integrated gearbox – Electronic speed control / exhaust pressure regulation – Inlet steam pressure control (from below) – Electronic fast-acting shut-off system with a separate valve – Nozzle group valves for partial load performance optimization – Lubrication system according to Frankenthal factory standards, water-cooled – Safety and monitoring systems according to Frankenthal factory standards – Flexible coupling based on vibration and torsional analysis Nedpfsu Tq Egsx Ah Uolk – Synchronous generator, 0.4 kV, IP 23 (optional IP 44 R), with rolling bearings and air cooling – Mechanical test run on test benches at the Frankenthal factory – Fully automatic operation via the central control system – Monitoring cabinet IP 42, including synchronization, compliant with VDE/IEC standards, to be mounted next to the generator according to supplier standards, without power section Color: Blue Origin: Germany

Condition: like new (used), Year of construction: 2015, nominal power: 1,300 kW (1,767.51 HP), rotational speed (min.): 1,493 rpm, rotational speed (max.): 1,493 rpm, input voltage: 6,000 V, input frequency: 50 Hz, overall weight: 6,100 kg, 1 asynchronous electric motor Manufacturer: Reform Elektromotorenbau GmbH Type: Y2-500-4 Power: 1300 kW Speed: 1493 rpm Voltage: 6000 volts Current: 151.4 A cos Φ: 0.86 Insulation class: F Frequency: 50 Hz Protection class: IP55 Design: Foot (B3) Nodsv I Alyspfx Ah Uelk Operating mode: S1 continuous operation Weight: 6100 kg Year of manufacture: 12/2015 Bearings: NU228C3 / 6030C3 and NU228C3 Cooling: Air Shaft height: 500 mm

Condition: new, Year of construction: 2019, functionality: fully functional, power: 1,250 kW (1,699.52 HP), input voltage: 690 V, input frequency: 50 Hz, type of input current: three-phase, protection type (IP code): IP55, Siemens AC Motor Type: 1LA4500-6CM00-Z Design: IM1001-B3 Standard: IEC60034-1 Insulation Class: F Protection Class: IP55 Duty Type: S1 Input Voltage: 690 V Input Current: 2 x 640 A Power (Pn): 1250 kW Nsdpfxsxal Drs Ah Uelk RPM: 995 Power Factor: 0.85 Frequency: 50 Hz

Condition: like new (used), Year of construction: 2017, functionality: fully functional, turning length: 8,000 mm, turning diameter: 1,600 mm, spindle motor power: 10,000 W, workpiece weight (max.): 35,000 kg, power: 10 kW (13.60 HP), Equipment: documentation/manual, KARATS CNC ROLL LATHE WITH FANUC-31i control. Swing1600mm cneter length 8000mm. Weight workpiece between centers 35,000kg Spindle drive motor AC100kw Bed width:2200mm. Nodpfxjra Axyo Ah Uolk Bed langth:12085mm.

Condition: new, Year of construction: 2022, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 10,000 V, input frequency: 50 Hz, protection type (IP code): IP55, ABB AC Motor Type: AMI 630L4A BSS Design: IM1001-B3 Standard: IEC60034-1 Insulation Class: F Nedpfsxann Tjx Ah Ujlk Protection Class: IP55 Duty Type: S1 Input Voltage: 10,000 V Input Current: 168 A Power Pn: 2,500 kW RPM: 1,488 Power Factor: 0.9 Frequency: 50 Hz

Condition: excellent (used), Year of construction: 1992, power: 2,500 kW (3,399.05 HP), input current: 192 A, overall weight: 9,900 kg, type of cooling: water, Induction motor SIEMENS 1SN 1634-4 HP 90-Z 1992, H-modul, all documents Nledpfxevu T Sqe Ah Uek