STAPRO made-to-measure freight elevator or freight lifter

STAPRO Goederenlift of Goederenheffer op maat

Condition: excellent (used), Year of construction: 2007, Buderus SB735 low temperature boiler Year: 2007 Hodpfx Aconr Ek Us Iont Output: 1200Kw Burner: Weishaupt oil or gas burner on request

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Hedpfsiidm Nox Ac Ient Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm Table height 870 mm Milling spindle Hsdpofpb Nmefx Ac Isnt non-replaceable 30 mm Clamping height 140 mm Height adjustment 125 mm Dust extraction port 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 Light Gray and RAL 5000 Violet Blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Table milling machine with a permanently installed, single-sided swiveling milling spindle for a swiveling range of -5° to +45.5° Positioning control for height and swivel adjustment with zeroing of the height and offset dimension Electronic position and speed indicators 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick-clamping device Push buttons for spindle start and stop Left and right rotation Milling cutter quick-clamping device Finely planed gray cast iron table with rigid frame support Control panel located below on rigid frame support Milling fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum splinter guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE compliant GS tested

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Hnsdpfx Aev Rmmmjc Ijt

Condition: new, Year of construction: 2025, Dry Rotary vane vacuum pump. Available in stock. Completely new. With 12 months warranty. Hnsdeftzpvspfx Ac Ist Nominal flow: 25 m3 / h at 50Hz. Final vacuum: 150 mbar abs. Any clarification, do not hesitate to contact us.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. Hedpfemhhypjx Ac Ijnt For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: new, Year of construction: 2025, Oscillating shear machine Cutting length 3100 mm Material thickness, steel: 10 mm Blades for stainless steel Touchscreen control: Cybelec Hjdpfx Acjlac Dre Ient Back gauge: 1000 mm Cutting clearance adjustable via control panel Delivery time: 3 months

Condition: used, Year of construction: 2009, Dexion Speedlock pallet rack P90 H RA1094 Ideal for your pallet storage needs, the Dexion P90H galvanized pallet rack provides a highly efficient, flexible solution for any need. Product information: - P90 H type upright frame, bolted infill. Hodpfx Acjk Aa Dzs Iont - Height x depth 8,450 x 1,100 mm. - Post width 90 mm. Beam type SLI 2.700 mm incl. safety pins - Shelf load 1,200 kg with evenly distributed load - floor fixing on site Example: Basic bay length 2,880 mm + add-on add-on bay length 2,790 mm Basic bay consisting of: 2 pcs. upright frame 10 pcs. beams incl. safety pins Extension panel consisting of: 1 pc. upright frame 10 pcs. beams incl. locking pins Technical data: Manufacturer: Dexion Frame type: P90 H Beam type: SLI 2700 mm Year of manufacture: 2009 Shelf load: 1200 kg with evenly distributed load Condition: good In case of larger demand, we will be glad to offer you a suitable individual pallet racking solution. Accessories you can ask for, e.g. ram protection corners used 45,00 € (per piece) Delivery information: Pickup possible at any time by appointment. Freight costs can be calculated if the shipping address is given. We deliver ex works, excluding packaging, including loading, without unloading and internal transport. Subject to prior sale. Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), Dexion P90 pallet racking. The racking is in very good condition. We have approximately 30,000 pallet spaces available. Hodpfxshq Dd Te Ac Iont Uprights with the following heights: 6000/1100 - 98 euros 7000/1100 - 115 euros 8000/1100 - 130 euros 9000/1100 - 147 euros BX 120/40/13/2700 crossbeam, 2400 kg, 17 euros per piece BX 100/50/15/2700 crossbeam, 2850 kg, 18 euros per piece BX 60/40/13/2700 crossbeam, 900 kg, 14 euros per piece We issue invoices. We invite you to cooperate.

Condition: new, Year of construction: 2025, Dry rotary vane vacuum pump. Hsdpoftzhnofx Ac Ient Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 140 m3 / h at 50Hz. Final vacuum: 150 mbar abs. Any clarification, do not hesitate to contact us.