Frequency-controlled drive motor

Struckmeier DSB3-18.44-50I.4 1-MYKO-000

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Fgsdpfxsy Sf Uks Aanei Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: excellent (used), functionality: fully functional, APV / RANNIE 30.60 ID.NO. 2802 Apv / Rannie mod 30.60 homogenizer for the production of e.g. Mustard, Sauces, Mayonnaise etc. Capacity approximately 2000 lit / hour, Max pressure 220 bar year mod 1994. Fgsdoumbwnjpfx Aanji Dimensions 130 x 90 cm Height 145 cm.

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Fgedpfx Aaoiyya Ajnoi Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 2016, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Fsdpfjiuxv Njx Aanogi Lightly used Hosokawa Alpine Ventoplex C32V air classifier in very good conditions. Recirculation classifier perfect for fine classification of abrasive products separating a fine fraction from the coarser one to ensure a perfect top cut of the product or dedust it getting rid of undesired ultrafines. It is suited for high yields with low energy consumption. Our classifiers obtain the perfect end product particle design. Our air classifiers allow you to split the product into two fractions, a fine and a coarse one, when a regular sieve can´t achieve this task due to product fineness or other characteristics. This is handy when you need to dedust the product removing the undesired fine dust or ensure a certain top cut separating the oversize coarse material, allowing you to adjust your product´s particle side distribution (PSD) to the required specification. This unit is suitable to process abrasive materials, mainly for the minerals industry. Material of construction: mild steel with wear protection Non pressure shock resistant (NPSR), non ATEX Scope: Hosokawa Alpine Ventoplex C32V with 15 kW motor and frequency converter for classifier wheel, 37 kW motor and frequency converter for ventilator wheel, internal feeding screw 5,5 kW motor with frequency converter, external blower for cooling 3 kW motor

Condition: like new (used), Year of construction: 2004, dry - cast epoxy resin distribution 3 phase transformer manufactured by ABB Zaragoza, Spain, type DTE 1000/24, 50Hz, 1000kVA, 20000 ( ± 2 x 2.5 %) /410V; Dyn11, IP00, IEC losses, year of manufacture 2004 and 1996, available 2 pcs on stock, rutine test protocols. Fgodpfx Aoxvlm Eeanji

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Fgodpfxowivdke Aanoi Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION

Condition: refurbished (used), Wood chip screen IDL000756 - Three layers Fsdpfx Aaetmtf Rjnsgi - Manufacturer: Passimo OY - Screen area: 15 m2 - After renovation.

Condition: new, Year of construction: 2024, We supply any wear and spare parts for cone crushers Sandvik, Allis Chalmers, Metso. Nordberg, Symons. Mantle, concave, bushes, gear and Piston. EUR1 possible ! Fgedpedry Axsfx Aanei

Year of construction: 2000, condition: excellent (used), VACUUM CALIBRATION TANK LÜERS VT125-1-6 Fsdpfoiidm Tsx Aanjgi Chamber: 1st Pipe Diameter: Max 125mm Length: 6 meters Feed: electrically back and forth Year of construction: 2000 Material: stainless steel

Condition: ready for operation (used), Components for the construction of a very large energy water wheel. Gearbox: Flender SFO 500 flange-mounted gearbox Number of gear stages: 4 Gear ratio: 185.63:1 Fsdjh Rrtnepfx Aanogi Transmissible torque: 131,300 Nm Speed n1 max.: 1485 rpm Speed n2: 8 rpm Shaft diameter D1: 80 mm Shaft diameter D2: 220 mm 3500 kg without electric motor Dimensions: Length: 2000 mm Width: 800 mm Height: 1000 mm For the shaft / pipe Shaft diameter: 560 mm Pipe wall thickness: 35 mm Bearing distance: 10,000 mm The shaft can be shortened as required by the bolted hubs. Welding is easily possible on the pipe, as it has a wall thickness of 35 mm.