Teufelberger strapping tape 9X055SW

Teufelberger 9X055SW

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Cgodpfx Aovgrh Uja Nop Your service team Mertens & Frowein GmbH

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Cgodpfxjic Rl Ds Aa Nop Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8t The hydraulic unit is functional, the drive motor is in the removed state.

Condition: excellent (used), GT2 tray sealer with E-Seal option. In very nice condition. Cjdpjrm Tg Iefx Aa Nsgp

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: Cgjdpfxswz Ev Ts Aa Nsp width: 200 mm length: 350 mm Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Year of construction: 2004, condition: ready for operation (used), Connected load: 15.5kW, weight: 6.8t. Codpfxeip D Rzs Aa Njgp

Condition: new, feed pressure 11 bar intake capacity 480 cm³ volume capacity 360 Receiver capacity 270 l / bar Number of cylinders 1 Stk. motor 400Volt / 3,0KW V / KW Cgodpfovkizgox Aa Nep turning speeds 892 U/min weight of the machine ca. 200 kg. range L-W-H 1,6 x 0,7 x 1,2 mm

Condition: as good as new (ex-display), operating hours: 6 h, power: 4 kW (5.44 HP), volume flow: 0.57 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, RENNER industrial piston compressor with refrigeration dryer Suction capacity: 700 l/min (delivery rate: 570 l/min) Maximum pressure: 10 bar Pressure vessel: 270 l Motor output: 400V, 4.0 kW Dimensions: 970 x 795 x 1880 mm Upright design for industrial applications, robust belt guard, galvanized compressed air vessel according to AD2000 guidelines (with hand hole) with intercooler and aftercooler, anti-vibration mounts for effective vibration reduction, Cedod Dhwnepfx Aa Negp with refrigeration dryer, optionally with automatic condensate drain for refrigeration dryer and vessel; Various other configurations available

Condition: ready for operation (used), Year of construction: 2021, Product features: rectangular and dimensionally stable, labeling capacity: 30 products/min, compressed air connection: 6bar, printing process: Thermal transfer printing, product weight range: 15g-1000g, machine weight: approx. 600kg. Label length range top: 15mm-160mm, label width range top: 30mm-300mm. Label length range bottom: 15mm-120mm, label width range bottom: 30mm-300mm. Product dimensions X/Y/Z on top: 30mm-300mm/50mm-250mm/50mm-150mm. Product dimensions X/Y/Z bottom: 140mm-300mm/50mm-250mm/50mm-200mm. Product dimensions X/Y/Z top and bottom: 140mm-300mm/50mm-250mm/50mm-150mm. Including a two meter long and 150mm wide conveyor belt and 180° Dorner conveyor belt. Documentation available. On-site inspection is possible. Cgsdpjvcc S Aofx Aa Njp

Year of construction: 1988, condition: good (used), A complete Atlas Copco air compressor including Donaldson Ultra Filter and a Tank in good working condition Cgjdpfxohpx U Aj Aa Njp

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Pressure force: 42 tons Beam dimensions: 700 x 800 x 600 - 1200 mm Beam weight: approx. 450 kg Press length approx. 7 meters press weight approx. 6000 kg Cedpfx Aora Nrxsa Nogp tying 4 x wire automatically