FAN

TRA-BO TGR 710/T

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Hfjdpfevvkd Tox Apnog Storage location: Nattheim

Year of construction: 2022, condition: as good as new (ex-display), Aluminum angled conveyor incl. mobile substructure horizontal area 1,100mm Rising area 1,500mm Hjdpfx Aei Igikepnsfg Pitch angle in bend 60° Total conveyor length: 1,750mm Discharge height: approx. 1,600mm Height of the horizontal: 300mm (feed height) Conveyor belt width 500mm PU conveyor belt including driver and corrugated edge petrol matt Drive: motor 0.25KW, speed 0.2m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 4x freely steerable transport rollers with parking brake 2 pcs. corrugated edges 50x35mm 11 pieces T-50 studs welded on in the middle - 481mm pitch 2-layer particularly laterally stable Usable width 290mm, results as follows: Transverse arrangement -70+30-5+290-5+30-70mm

Condition: good (used), Year of construction: 2005, operating hours: 32,870 h, functionality: fully functional, machine/vehicle number: 6030578, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, We offer for sale Traub TNL26K automatic cnc lathe. Machine is connected to power and can be inpected every time by prior appointment. Year of built: 2005 Spindle passage 32mm Main spindle: 6.7/10.7kW; 8000rpm Counter spindle: 6.7/10.7kW; 8000rpm Upper turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24kW Barfeeder: FMB Turbo 5-42/4200mm Hfedpjvldx Aefx Apnjg Swarf conweyor: Knoll 240 S1/100 Coolant Kompaktbandfilter: Resy Machine is sold with a lot of toolholders not driven and driven - list on attached photo.

Condition: used, machine/vehicle number: 006849, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Hfjdpowd Itmofx Apneg Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 006042, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Hjdpfowacqlsx Apnofg Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 40 mm Operating Units: 9 nr

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot control 1200 x 800 mm suction nozzle 80 mm Hfodpfx Aeigadlopnog pneumatic connection cable + plug 16 A 1 set of operating tools 1 set of sensing rollers

Year of construction: 2026, condition: new, Lifting conveyor for end of line with Vertical Form Fill Seal machines Conv belt width - 310mm Hodpfxjk N A Sue Apnjfg Pick up height - 240mm Lifting height - 1000mm Speed - 9,5m/min With castor wheels

Condition: used, Screw compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6 Serial no. 6240330200 Year of construction 2003 Volume flow 4.6 m3/min. Pressure capacity 10 bar Motor power main motor 30 kW Mains connection 400 Volt, 50 Hz Connection thread 1 1/2 inch Hfjdpfxefmim Ue Apneg - 36004 Switch-on hours read - 19256 Load hours read - Soundproofed Space requirement L x W x H 1850 x 1050 x 1760 mm Weight 910 kg good condition

Condition: like new (used), Year of construction: 2021, operating hours: 494 h, functionality: fully functional, power: 15 kW (20.39 HP), type of cooling: air, Equipment: CE marking, documentation/manual, type plate available, Operating hours total: 494 h Load hours: 237 h Maintenance freshly performed -The variable speed screw compressor NOBEL with 'DNair2' microprocessor control is already factory-prepared for the SMS module (optionally available under: 9062744) -The controller communicates in plain text; all important operating states can be read directly. -The controller has an RS 485 interface Features: Thermal control valve compressor block POWERSYSTEM separate radial fan, temperature controlled for optimal cooling Very good accessibility for all maintenance work Rotation direction monitoring using phase sequence relay without dryer, standard with galvanized cyclone separator tank Technical details: Model: Powersystem NOBEL 15-10 DV Pressure bar: 10 Delivery rate L/min: 840-2100 Motor kW/HP: 15/20 Voltage Volt/Hz: 400/50 Noise level dB (A): 68 Weight: 250 Kg The machine can be demonstrated on site under power if desired. All information without guarantee Errors and prior sale excepted Sale EXW free loading from warehouse Hessisch Lichtenau. Sale exclusively to commercial buyers, excluding any liability for material defects. Hfjdpfx Asqd Uvuopnog Liability for damages resulting from injuries to health, body, or life and grossly negligent and/or intentional breaches of my duties as a seller remains unaffected. This offer is exclusively aimed at entrepreneurs (commercial users) or dealers. No sale to consumers/end customers.

Condition: used, Year of construction: 2016, operating hours: 14,279 h, machine/vehicle number: 644063, delivery quantity 4.61 m³/min at 10 bar delivery quantity 5.23 m³/min at 8 bar operating pressure 10 bar nominal power 30.0 KW operating hours 14,279 load hours 11,148 compressed air connection G1 1/4" sound level 69 dB(A) space requirements length - 1,400 x width - 830 x height - 1,640 mm Hfedpfen Stansx Apnsg weight approx. 850 kg