VS-22101 Electric tractor transpoter Translift TLD600 BJ2019

TRANSLIFT TLC600

Condition: excellent (used), power: 1,700 kW (2,311.35 HP), The following LOOS brand steam boilers are the subject of the offer: LOOS U-ND 350 steam boiler Specification: - working pressure 1 bar - boiler control cabinet - oil burner - feed pump Steam boiler LOOS U-HD 800 Specification: - working pressure 10 bar - boiler control cabinet - Weishaupt gas-oil burner - Grundfos CR feed pump - safety valve - feed water tank - chemical inhibitor tank with dosing pump Loos U-HD 1250 steam boiler Specification : Isdouhm Erepfx Am Ejia - working pressure 16 bar - control cabinet - Weishaupt gas-oil burner - Grundfos feed pump

Condition: new, Year of construction: 2026, Mini Crawler Crane TB5000 A mini crane on a crawler chassis designed for indoor and outdoor work. Maximum lifting capacity: 2400 kg. * radio control of the device - driving, working, spreading the feet * double power supply of the crane - diesel and electric 230 V Iiedpoibqraofx Am Eja * maximum lifting capacity - 2400 kg * anti-overload system as standard * maximum horizontal reach over 11 m * four hydraulic extensions + 1 manual extension * maximum vertical reach over 13 m * 4 hydraulically lowered supports * weight approx. 2200 kg * height approx. 195 cm * width approx. 88 cm * active arm 16 degrees Additional, optional equipment: * search hook * hydraulic winch 990 kg * Li-ion battery power supply * pads for support feet * hydraulic FLY JIB Available in the selected color.

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Rotor width 2500 mm Rotor diameter approx. 400 mm Motor 75 kw Discharge via conveyor belt with magnetic roller Iedpfstgqlyox Am Esia

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping Ijdpfx Amslhwr Re Ejia - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: excellent (used), the plant is consisting of: - 2 chain separators - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, - 5 conveyor belts - 2 double-shaft extruders connected in parallel - 1 double shaft mixers Iedpolxzl Esfx Am Ejia - container for liquid extracts, etc.

Year of construction: 2002, condition: good (used), functionality: fully functional, Drum dryer for wood sawdust and chips with capacity up to 15t/h. Iijdevx S Hnspfx Am Esa Condition - fully functional.

Year of construction: 1997, condition: good (used), Type: DDA:VP-370:A27097 Trough: approx. 3,000 x 660 mm Iijdst S Sxgopfx Am Eja Screw diameter approx. 370 mm Drive via geared motor

Condition: reconditioned (used), Year of construction: 1998, The redom SE200 used separation table is fully operational, can be seen and is available on site in Poland. In 2019, the machine underwent a thorough renovation. The Redom separation table works on 3 basic principles, eccentric speed, airflow and the angle of inclination of the table. From the market-leading Redoma company, now part of Eldan's recycling machine company, the SE200 has a throughput of up to 2000 kg/p/h. Suitable for all types of dry electric granulated, the SE200 table used produces 99.5% pure copper product. Simple to set up and use, the Redom SE200 has an eccentric 3 kW power unit and an 11 kW blower motor. Redoma SE200 Dimensions: Length: 2.7m Width: 1.8m Iisdjin Ndwepfx Am Eea Height: 2.2m Weight: 1,700Kg

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm Iedpfstzctmjx Am Eoia usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: ready for operation (used), Drum Screen Terra Select. 50 mm screen perforation Iijdpfjvnmcvox Am Esa