Exhaust air dedusting system

Unbekannt

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chucks, 4 sets -Jaw width: 16 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 41/48/H33 mm Njdjzpw H Depfx Akcsld -Weight/set: 1.6 kg

Condition: new, 40000 kg length 8000 mm width 3000 mm height 900 mm lenkbar lenkbar size of tyres 540 / 300 2-fach mm dimensions 9,9 x 3,0 x 0,9 m Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance Nledpfsfrzwfjx Akced - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, 7 sets -Jaw width: 20 mm -Dimensions: see photo technical drawing -Submission/Price: complete Nlsdpfxezpwy Dj Akcjd -Dimensions/Set: 48/60/H40 mm -Weight/set: 0.8 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, 6 sets -Jaw width: 18 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 60/55/H47 mm Nedezpwxtspfx Akcold -Weight/set: 1.1 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Pellet plant and bagging system - Inspection possible Nljdpsw Hrg Nsfx Akcjd - Raw material bunker 4 cubic meters with discharge into a cutting mill, suitable for wood chips up to or smaller than G30 + conveyor belt - Cutting mill 22.5 kW with soundproof cabin - Material bunker 4 cubic meters with discharge conveyor belt, LP series - Pellet press LP22 (Integrated central lubrication, water pump, and temperature monitoring ensure a high level of user-friendliness) - Screening unit with conveyor for LP22 (incl. fill level sensor for big bag with pivoting holder and sensor cable for connection to pellet press LP22) - Big bag frame Vario 1.5m³ - Bagging system suitable for Vario BigBag system For further information, please do not hesitate to contact us.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, 8 sets Nledpjzpwuhjfx Akcsd -Jaw width: 18 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 60/72/H47 mm -Total weight: 1.4 kg/set

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool Njdpfxszpwq No Akceld -Punching tool: Holder for punching tool -Holes: Ø 60 mm -Dimensions: see photos -Dimensions: 253/71/H104 mm -Weight: 6.6 kg

Year of construction: 1999, condition: ready for operation (used), Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible. Nodpfxsw Duvhs Akcsld

Condition: good (used), Vacuum pyrolysis cleaning oven, vacuum pyrolysis oven, pyrolysis oven, cleaning oven -Vacuum pyrolysis cleaning oven: Vacuum pyrolysis oven Nljdpfx Akszpii Deced -Type: unfortunately without a type designation -Entrance opening: Ø 600 mm -Interior dimensions: Ø 600 x 2480 mm -Vacuum pump: 2.35 kW -Individual components: see photos -Dimensions: 5200/1635/H1760 mm -Transport dimensions: 3200/1635/H1760 mm / 2000/650/H610 mm -Weight: 1210 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool Nledpfeznu Atex Akcjd -Roller guide: for profile steel shears, flat steel shears... -Roller spacing: approx. 84 mm -Dimensions: see photos -Dimensions: 245/143/H70 mm -Weight: 5.4 kg

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST Shaft length 140 mm roll diameter 62.0 mm throat 100 mm roll speed 16.0 + 32.0 U/min engine output 0.75 kW weight 135 kg range L-W-H 900 x 450 x 1350 mm Display machine - like new Never been used (!!) Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers Nljdexaaf Ropfx Akcsd - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool Nljdpfoznt Tdjx Akced -Punching tool: Punch holder for square notching punch for profile steel shears and flat steel shears -Type: 60/60-21 -Hole spacing: 177/60 mm / Ø15 mm -Dimensions: see photos -Dimensions: 205/95/105 mm -Weight: 8.2 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool Nlsdoznt S Topfx Akcod -Punching tool: Punch holder for square notching punch for profile steel shears and flat steel shears -Hole spacing: 177/60 mm / Ø15 mm -Dimensions: see photos -Dimensions: 205/115/105 mm -Weight: 10.3 kg

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST shaft length 140 mm roll diameter 62.0 mm throat 100 mm Njdpfexacilsx Akceld total power requirement manuell kW weight of the machine ca. 50.0 kg dimensions of the machine ca. 560 x 220 x 500 mm Display machine - like new Never been used (!!) Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft

Condition: ready for operation (used), Grinding spindle IBCA52540T, max. 40,000 rpm, length: 31.1 cm, outer diameter: 50 mm, shaft outer diameter: 15/19 mm, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nedpfeznq N Ajx Akcold