Dosing Pump - Hygienic Dispenser

Viscotec Hygienic Dispenser 3VHD12

Year of construction: 2023, operating hours: 300 h, condition: like new (used), functionality: fully functional, Hygienic dosing pump for precise volumetric dosing of low to high-viscosity and particulate media. Product-contact surfaces Elastomers with FDA compliance certificate Product-contact parts are autoclavable Easy integration thanks to compact design Overall length approx. 2300 mm Nominal width approx. 350 mm Total width with motor approx. 500 mm Belt top edge adjustable from 980 to 1080 mm Base frame made of robust square tube profiles Version in stainless steel grade 1.4301 Double-sided knife edge, radius approx. 5 mm Food-grade conveyor belt, make: Habasit, color: white Central drive station Gear motor by SEW included Food-grade coating (depending on delivery time) Speed adjustable via frequency inverter (between 0.8 - 8 m/min) Incl. adjustment frame for 5 dispensers by Viscotec Adjustment is carried out using profiles and clamping units Height adjustment is manual via clamping units; all dispensers are adjusted simultaneously. Dispensers can be finely adjusted individually via slotted holes, as needed. Side adjustment, tilt, and adjustment in or against conveying direction can be set for each dispenser individually. No side guide included. Incl. engineering Incl. pre-assembly Incl. installation of dispensers at our facility Incl. test at our facility Surface finish: Conveyor in stainless steel 1.4301, round tube frame for dispensers in stainless steel 1.4301, clamping units made of aluminum. 5 bars are transferred from an existing conveyor system onto our conveyor belt. Control cabinet made of stainless steel 1.4301 Control and frequency inverter by Mitsubishi Electric Setup: Main switch, emergency stop switch, automatic on and off push buttons Display for adjusting the speed in m/min and setting delay time for start signal for the dispensers Sensors for bar detection (each bar is detected individually) Sensors and signal for dispenser start (each dispenser receives its own start signal) Hodexcvzaspfx Adzjn Communication interface with Viscotec Emergency stop currently only available for our own machine. Incl. control cabinet construction with 50% reserve capacity Incl. high-grade sensors (distance photoelectric sensors, capable of measuring and evaluating distance) Incl. high-grade control system (hardware and software can be expanded at any time without replacing the controller) Incl. HMI (display), approx. 7" Incl. E-plan Incl. program Incl. in-house test (interface test with Viscotec) Surface finish: control cabinet entirely of stainless steel, sensors made of stainless steel and FDA approved.

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Hedpfx Aohlp Efodzon

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2VHD12-3D Hygienic Dispenser, Hygienic metering pump for precise volumetric dosing of low- to high-viscosity and chunky media. Hjdpfx Adjxcgihjzsn Product-contacting surfaces Elastomers with FDA compliance declaration Product-contact parts can be autoclaved Easy integration due to compact design

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Hsdpjvllxdofx Adzon Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Hodpspu R Ncsfx Adzjn Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: good (used), Pressure vessel 11 bar, 1500 Liter litre Hedpfxeg A Hc Hs Adzon

Condition: new, Year of construction: 2025, TPO0909E powder coating oven Working dimensions (mm): 900 (W) x 900 (D) x 1600 (H) SPECIFICATION: * Power consumption: 9 kW. Equipment: * Rod for hanging details * Convection (Equal temperatures throughout the oven), * Locks for safe opening and closing, * Maximum operating temperature: 230°C. TQ0906 powder coating booth Working dimensions (mm): 900 (W) x 600 (D) x 1400 (H) SPECIFICATION: * Power consumption: 1,6kW * Air capacity: 3200m3/h, * Hermetic lamp: 1pcs. * Automatic filter cleaning system * The cabin is equipped with a set of pneumatic quick connectors * Cartridge filter: 1 pcs * Paint recovery container Oven, cabin in stock, ready for shipment. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. Hodpfx Aofgnytodzen We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions. Please do not hesitate to contact us.

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths Hsdjiu Smbepfx Adzon 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Length: 800mm Hsdpfxoinur As Adzsn Width: 800mm Height: 1000mm Volume: 1.5m³/min Power: 11kW

Condition: used, Ladegerät - Charger for forklift Jungheinrich E 220 G 24/65 B-ET-DA Hjdpjh Axztsfx Adzen Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test