Turbo Test Bench
VTM Group GeoBoost-7000

Name: VTM Group GeoBoost-7000
Brand: VTM Group
Availability: InStock

Year of construction

2025

Condition

New

Location

Odesa

Turbo Test Bench VTM Group GeoBoost-7000

Show map

Machine data

Machine type:: Turbo Test Bench

Manufacturer:: VTM Group

Model:: GeoBoost-7000

Year of construction:: 2025

Condition:: new

Price & Location

Location:: 65031 Odesa, Україна

Call

Details about the offer

Listing ID:: A18329386

Update:: 22.01.2025

Description

GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation.
Stand for static and dynamic calibration and testing of turbocharger.

It has a combined two-position design, which allows testing the turbocharger in two modes
- rapid static calibration of turbocharger geometry
- Full dynamic diagnostics at different operating modes

GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics.

Ledpfx Aovtn Hmebveri

HIGHLIGHTS
• Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning.
• Flexible and versatile to work with a variety of turbocharger models.
• All types of turbochargers can be installed using the accessories provided.
• Oil leak testing using heated oil and compressed air.
• N75 turbocharger control valve testing.

KEY FEATURES
- Ability to adjust the extreme position of the blades of the air flow control mechanism.
- Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism.
- Real-world turbocharger testing;
- Real-time geometry tuning;
- Performance testing of actuators: vacuum, pneumatic and electric types;
- Diagnosis of servo-drives of electric actuators (optional);
- Post-assembly testing of the turbocharger for oil leakage;
- Availability of a high capacity vacuum pump to create the required vacuum and air flow.
- Testing the turbine according to the manufacturer's test plan;
- Calculate turbocharger performance;
- Plot supercharger inlet and turbocharger outlet boost vs. flow;
- Construct the resulting graph;
- Generate and print test reports.

SPECIFICATIONS
Maximum rotor speed 99 000 rpm
Maximum air flow rate of compressor 110 m³/min
Maximum pressure of compressor 900mbar
Maximum vacuum created by the vacuum pump -800mbar
Power supply 380V, 3Ph, 50Hz
Power input 6 kW
Dimensions 1700 х 900 х 1500 mm
Weight 400 kg

Seller

Registered since: 2023

19 listings online

Call

Send inquiry

Telephone & Fax

+380 50 4... show

These listings may also fit your interest.

Listing

Center lathe Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012)

Great Britain

274 km

Center lathe
TacchiHD/1450 – 725 x 4000mm CNC Lathe (2012)

Call

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Serial Number: 7264 Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Lredpfexc In Ssx Abvsi Swarf conveyor 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control

See details

Listing

Multi-Tasking CNC Turning Center Spinner TTS65-Triplex

Germany

1,034 km

Multi-Tasking CNC Turning Center
SpinnerTTS65-Triplex

Call

Year of construction: 2019, condition: ready for operation (used), A simultaneous turning center Spinner with three turrets and extensive accessories, spare parts and tools is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: Speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: Speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turret 1/2/3: Turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Including loading magazine Top Automazioni, cooling/high pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tool package and other spare parts. Documentation available. On-site inspection is possible. Lrsdoua E Trepfx Abvoi

See details

Listing

Mala Vranjska

2,023 km

Cutter
SeydelmannK 204 Ultra

Call

Listing

Rathenow

1,075 km

Scrap shears
McSchrottMS-6300e

€189,000

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2023, operating hours: 1,500 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap shear MS-6300e (scrap shear with electric motor) without operating materials. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630t Cutting length: 1600mm Discharge height: 500mm Power: 110 KW Capacity: 12-17 t/h Machine weight: 40 tons (+ diesel generator 4 tons) Hopper size: 3850mm x 2600mm x 1500mm Lrjdeuu Upgspfx Abvei Information: A scrap shear is used for economical scrap cutting: - simple automatic operation - Energy-saving - Cost-saving - No foundation required Function: Scrap is fed into the loading area with the aid of an excavator. Due to the horizontal filling area and the scrap's own weight, it falls down into the loading chamber and into the cutting area. The scrap is compacted at the front wall and cut by the horizontally moving tool pick-up side via the blades on the front wall. While the tool carrier carriage moves horizontally, the processed material is pushed out via the blades on the front wall of the container. When returning to the rear position, the loaded scrap moves into the interior of the shears under its own weight. The scrap shears are available in different versions depending on customer requirements and the output size can be selected (for new orders). Inspection and trial operation are possible.

See details

Listing

Germany

967 km

Cold Rolling Machine
EXCELLOXK 875

Call

Listing

Ilsenburg (Harz)

1,009 km

Wheel Lathe
RAFAMETUBC 150

Call

Year of construction: 1977, condition: used, turning diameter 700-1500 mm clamping length 3000 mm guage width 1676 mm Control weight of the machine ca. 60 t Rafamet UBC 150 wheelset lathe for railway wheelsets Serial No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Gauge of the wheelsets to be machined in standard version: 1435mm track widths: 1435mm , 1524mm , 1676mm Length of wheelsets to be machined: 1640-3000mm Running diameter of the wheelset: 700-1500mm Lredpfx Absuddglovji Driving diameter: 350-1350mm Width of the wheelset tyre: up to 140mm Fork dimensions of the wheelset lathe_ 8700x360x3250mm Total installed power: 172kW Weight of the machine: 59200kg Speed of the setting movement Lifting and centring device: 2500 mm/min. Headstocks: 1320 mm/min. Quills: 550mm/min. Supports in the longitudinal direction: 1300 mm/min.

See details

Listing

Shredder Jenz AZ 35D/Elektrik-Problem/Schredder/Häcksler

Butzbach

981 km

Shredder
Jenz AZ35D/Elektrik-Problem/Schredder/Häcksler

€12,000

~~€15,500~~

ONO plus VAT

Call

Condition: good (used), Year of construction: 1996, overall weight: 9,960 kg, JENZ AZ 35 D/Electrical Issue/Shredder/Chipper • Manufacturer: Jenz • Model: AZ 35 D • Year of manufacture: 1996 • Total weight: 9960 kg • Engine: Mercedes-Benz 6-cylinder • Electrical issue • Rotor and beaters in good condition • Discharge conveyor as new • Power: kW/HP • Documentation • German machine • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale, Lodpsxb Dkyjfx Abvjri - Errors and/or typographical mistakes reserved. - Sale according to our terms and conditions.

See details

Listing

Germany

967 km

Lathe - cycle controled
SEIGERSLZ500E

Call

Condition: used, Year of construction: 2006, Technical details: turning diameter: 490 mm turning length: 2000 mm total power requirement: 15/20 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 2,8 x1,85 x 1,9 m In like new condition Heidenhain cycle control Torsion-resistant bed, made of high-quality cast iron with hardened, precision-ground guideways and a glass scale on the X-axis Safety clutch on the Z and X axes Sealing air with carbon filter in direct position measuring system High accuracy and rigidity of the lathe spindle thanks to precision spindle bearings, spindle bore Ø 93 mm standard, optional Ø up to 130 mm Solid tailstock, quill Ø 90 mm with internal taper MK5 Large overhang above the facing slide for easy accessibility during shaft machining. The machine has Teach-in CNC Programms. Control: MC420. Tool holder: SAUTER. * Lrodewmcx Aspfx Abvsi

See details

Listing

Valve seat milling machine SERDI, Comec, PEG, Carmec, Kwik-way SERDI3.0

Hódmezővásárhely

1,930 km

Valve seat milling machine
SERDI, Comec, PEG, Carmec, Kwik-waySERDI3.0

€27,000

EXW ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, SERDI Valve seat milling machine for cylinder head - used machine, in very good condition, ready to use Technical details: Dimensions (L x W x H): 1690 x 1050 x 2170 mm Net weight approx.: 1085 kg Max. cylinder head dimensions (L x W x H): 1200 x 500 x 450 mm Crosswise work piece tilting: +42° to - 15° Min-max machining capacity: 16 - 70 mm Workhead travel: lengthwise: 930 mm crosswise: 40 mm sphere-cylinder travel (radius): 9 mm Lrsdsv Ild Sspfx Abvoi Spindle: max. spindle inclination degrees: 5 travel: 200 mm motor power: 1200 W rotation speed: 100 - 1200 RPM Connections: electric supply: 2.5KVA - 230V - 1Ph-50/60Hz air pressure supply: 6 bars air volume supply: 300 l noise level at 400 rpm 72 DBA, at 1200 rpm 82 DBA If you are interested, please contact me! More machines for sale: A-M, Serdi, Comec, AMC, Carmec, Kwik-Way, Serdi, PEG Crankshaft grinding, surface grinding, valve grinding, valve seat milling, pressure testing, parts washing, line boring, valve guide presses, vacuum tester

See details

Listing

VNT Turbo Flow Bench VTM Group GEOMET-2000

Odesa

2,561 km

VNT Turbo Flow Bench
VTM GroupGEOMET-2000

Call

Condition: new, GEOMET-2000 flow bench for calibrating a variable nozzle turbocharger without shaft rotation. This flow bench can calibrate the geometry of vacuum, air and electronically controlled turbochargers. The equipment is adapted to the needs of workshops for repairing turbochargers of trucks and cars. It is also designed to work with large-sized or non-standard turbocharger designs; Flowbench GEOMET-2000 will allow a regular workshop to provide professional turbine repair services, thus gaining more customers. HIGHLIGHTS Adjusting the end stop position of the air flow control mechanism (variable geometry) will eliminate the "overblowing" effect, which is detrimental to the engine. Adjusting the length of the actuator rod to adjust the actuation timing of the air flow control mechanism. Evaluating the spring elasticity of the actuator for in-depth diagnostics of vacuum and pneumatic actuators. Checking the operation of the N75 valve for turbines with vacuum valve, which is involved in controlling the turbocharger on the vehicle. Tuning of electronically driven turbos is done by connecting to an external tester ATP-1000. Vertical position of the turbocharger and free working area - comfortable and efficient work with all types of turbochargers. KEY FEATURES • More than 6200 turbo references database • Creation of a test plan for a new turbine from the manufacturer. • All measurements are done in real time. • Calibration of the test bench before starting work • Automatic atmospheric pressure and temperature compensation Ledpfxjn E N E Ej Abvsri • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Turbo Test software. • Creation and printing of reports on the tuning process. • Quick turbine installation thanks to magnetic adapters • Self-diagnostics SPECIFICATIONS Maximum productivity of the vacuum pump 180 m3 Required pressure in the pneumatic system 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1190 х 520 х 1730 mm Weight 255 kg

See details

Advertise here

Turbo Test BenchVTM Group GeoBoost-7000

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Turbo Test Bench
VTM Group GeoBoost-7000